Jesse's hy35 powered w116
Jesse's hy35 powered w116
06-04-2012, 01:50 AM
#302
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
06-04-2012, 01:50 AM #302I would like to do a SBC 350 in a w123
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
07-10-2012, 09:21 AM
#303
(06-04-2012, 01:50 AM)Captain America I would like to do a SBC 350 in a w123
GF wants to do this to her 240. We are debating between a later MB drivetrain, or going chevy 350 sleeper.
any updates dieselboy? love to see how this might turn out with the 460
This post was last modified: 07-10-2012, 09:22 AM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(06-04-2012, 01:50 AM)Captain America I would like to do a SBC 350 in a w123
GF wants to do this to her 240. We are debating between a later MB drivetrain, or going chevy 350 sleeper.
any updates dieselboy? love to see how this might turn out with the 460
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
07-11-2012, 01:49 AM
#304
Don't quit so soon.
I would make an proper superturbo OM617A (like mine is
or swap an OM605 for superturbo transformation.
- MB w126 300SD Superturbo (US) -83, Mods: OM617A with custom head work, Master Power Turbo 802332, PP-Diesel custom 7mm IP, China intercooler, KKD-Motorsport exhaust manifold, DIY intake manifold, Coolmist Waterinjection, DIY Supermeter display/datalog with PLX Wideband Lambda, Siekkinen custom 722.3 autotrans, Elbe Performance LSD, Green Filter cold air intake, straight 3" exhaust with two dual 2.5" outputs
- MB r129 500SL AMG (JDM) -94
Full AMG bodykit, full JDM features, modified ECU and exhaust
- MB w123 250E-TT (JDM) -85
Full 1JZ-GTE twinturbo conversion, full aircon, custom china cooler, custom IC-pipes, custom sport recaro interior, custom 3-piece JDM rims
So you blew your mb diesel and now your gonna swap to some american crap engine.
Don't quit so soon.
I would make an proper superturbo OM617A (like mine is or swap an OM605 for superturbo transformation.
- MB w126 300SD Superturbo (US) -83, Mods: OM617A with custom head work, Master Power Turbo 802332, PP-Diesel custom 7mm IP, China intercooler, KKD-Motorsport exhaust manifold, DIY intake manifold, Coolmist Waterinjection, DIY Supermeter display/datalog with PLX Wideband Lambda, Siekkinen custom 722.3 autotrans, Elbe Performance LSD, Green Filter cold air intake, straight 3" exhaust with two dual 2.5" outputs
- MB r129 500SL AMG (JDM) -94
Full AMG bodykit, full JDM features, modified ECU and exhaust
- MB w123 250E-TT (JDM) -85
Full 1JZ-GTE twinturbo conversion, full aircon, custom china cooler, custom IC-pipes, custom sport recaro interior, custom 3-piece JDM rims
07-11-2012, 12:09 PM
#305
(07-11-2012, 01:49 AM)JTY So you blew your mb diesel and now your gonna swap to some american crap engine.
Don't quit so soon.
I would make an proper superturbo OM617A (like mine is
I second this.
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
07-11-2012, 12:09 PM #305(07-11-2012, 01:49 AM)JTY So you blew your mb diesel and now your gonna swap to some american crap engine.
Don't quit so soon.
I would make an proper superturbo OM617A (like mine is
I second this.
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
07-22-2012, 02:38 AM
#306
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Been busy moving and other crap. I'm going to give it one more shot at finding a decent Om617. I've been keep a eye out and they just stopped showing up in the junkyards down here. There's a billion gassers but no diesels. I'd like a 603/606/605 but I've seen enough of those to count on one hand and none ever at the junkyards.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
08-13-2012, 12:16 PM
#307
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
I still have a complete rotating assembly and everythin minus a block and heads, if that helps.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
08-18-2012, 01:06 AM
#308
Hotrodbenz
08-18-2012, 01:06 AM #308I have a whole om 603 with the m pump and a 190e with a 5 speed I was gonna put in my 123 now for sale
02-13-2013, 01:18 AM
#309
It went to the crusher after I pulled a few "rare" parts. They'll be in the forsale section soon. I looked for a good 617 for awhile and had no luck.
Shoved it up on the trailer with my truck and sent it off.
![[Image: FAEB884B-A5C4-4E1C-8359-F79C6DA5F333-190...3f38b5.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/FAEB884B-A5C4-4E1C-8359-F79C6DA5F333-1905-0000033E2DF42BF5_zps673f38b5.jpg)
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Well.... It crushed my heart to do it but...
It went to the crusher after I pulled a few "rare" parts. They'll be in the forsale section soon. I looked for a good 617 for awhile and had no luck.
Shoved it up on the trailer with my truck and sent it off.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
02-13-2013, 06:49 AM
#310
This post was last modified: 02-13-2013, 06:53 AM by JustPassinThru.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
02-13-2013, 06:49 AM #310My condolences. Dibs on the HY35 and the FMIC.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
lgreeley83
02-13-2013, 07:51 AM #312i'll take some e fans
" straighten up that star on the grill, assholes."
02-13-2013, 12:43 PM
#313
(02-13-2013, 06:49 AM)JustPassinThru My condolences. Dibs on the HY35 and the FMIC.
The turbo went onto my rally Volvo
(02-13-2013, 06:52 AM)Ksteen2 why did'nt you take off those wheels?? :/
They were junk. Chrome was coming off and they were corroded bad. I didn't take the 2nd gen brakes off either.
(02-13-2013, 07:51 AM)lgreeley83 i'll take some e fans
The stock one or the Volvo 2spd one? I only pulled the Volvo one off.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
(02-13-2013, 06:49 AM)JustPassinThru My condolences. Dibs on the HY35 and the FMIC.
The turbo went onto my rally Volvo
(02-13-2013, 06:52 AM)Ksteen2 why did'nt you take off those wheels?? :/
They were junk. Chrome was coming off and they were corroded bad. I didn't take the 2nd gen brakes off either.
(02-13-2013, 07:51 AM)lgreeley83 i'll take some e fans
The stock one or the Volvo 2spd one? I only pulled the Volvo one off.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
02-13-2013, 01:26 PM
#314
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Which yard you sending it too?
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
02-13-2013, 02:27 PM
#315
(02-13-2013, 01:26 PM)w123love Which yard you sending it too?
It's been cubed up and probably halfway to china by now. I have a friend that does scrap metal recycling.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
(02-13-2013, 01:26 PM)w123love Which yard you sending it too?
It's been cubed up and probably halfway to china by now. I have a friend that does scrap metal recycling.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
02-13-2013, 04:01 PM
#316
" straighten up that star on the grill, assholes."
lgreeley83
02-13-2013, 04:01 PM #316I just see in your signature "e-fan" I figured you had something special to the merc. Trying to fit my300d with one.
" straighten up that star on the grill, assholes."
02-13-2013, 06:36 PM
#317
(02-13-2013, 04:01 PM)lgreeley83 I just see in your signature "e-fan" I figured you had something special to the merc. Trying to fit my300d with one.
Volvo 850/960/s70 fan and shroud fit nicely and have a 2 speed controller.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
(02-13-2013, 04:01 PM)lgreeley83 I just see in your signature "e-fan" I figured you had something special to the merc. Trying to fit my300d with one.
Volvo 850/960/s70 fan and shroud fit nicely and have a 2 speed controller.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
02-14-2013, 12:21 AM
#318
(02-13-2013, 02:27 PM)dieselboy(02-13-2013, 01:26 PM)w123love Which yard you sending it too?
It's been cubed up and probably halfway to china by now. I have a friend that does scrap metal recycling.
Oh damn it was a better deal to cut it up than having Ecology buy it?
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
(02-13-2013, 02:27 PM)dieselboy(02-13-2013, 01:26 PM)w123love Which yard you sending it too?
It's been cubed up and probably halfway to china by now. I have a friend that does scrap metal recycling.
Oh damn it was a better deal to cut it up than having Ecology buy it?
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
02-19-2013, 10:31 PM
#321
(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
02-19-2013, 10:31 PM #321(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
02-19-2013, 10:49 PM
#322
(02-19-2013, 10:31 PM)willbhere4u(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
He must have been lurking for a while before striking hahaa
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-19-2013, 10:49 PM #322(02-19-2013, 10:31 PM)willbhere4u(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
He must have been lurking for a while before striking hahaa
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-19-2013, 11:40 PM
#323
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I don't know where the karma is in the decision for me to get rid of the car lol. He's been trolling everywhere I know of.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
02-24-2013, 02:18 PM
#325
Pisses me off.
EDIT: I hate to see the W116 gone, that was such a sweet lookin old car. But you gotta do what you gotta do!
This post was last modified: 02-24-2013, 02:19 PM by MFSuper90.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
I am on CompD quite a bit, and all he does over there is troll. Nothing useful, just makes every thread he can an arguement about something retarded.
Pisses me off.
EDIT: I hate to see the W116 gone, that was such a sweet lookin old car. But you gotta do what you gotta do!
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
02-24-2013, 03:52 PM
#326
(02-19-2013, 10:31 PM)willbhere4u(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
I think its funny that even though I joined after this guy was banned I saw the post and thought "FI". I actually didn't type the whole name because I didn't want to attract possible accidental search hits. Its like he's voldermort waiting for his moment.
" straighten up that star on the grill, assholes."
lgreeley83
02-24-2013, 03:52 PM #326(02-19-2013, 10:31 PM)willbhere4u(02-16-2013, 09:47 AM)RedDiesel Karma is a bitch.
Lance aka Forcedinduction strikes again! lol
I think its funny that even though I joined after this guy was banned I saw the post and thought "FI". I actually didn't type the whole name because I didn't want to attract possible accidental search hits. Its like he's voldermort waiting for his moment.
" straighten up that star on the grill, assholes."
Users browsing this thread:
14 Guest(s)
14 Guest(s)
Users browsing this thread:
14 Guest(s)
14 Guest(s)