New Master Power R series turbo
New Master Power R series turbo
(01-31-2012, 11:37 AM)antonmies if the comp housing changes, the map changes. Where is the 178034 you said the map is from?
(01-31-2012, 11:37 AM)antonmies if the comp housing changes, the map changes. Where is the 178034 you said the map is from?
(02-01-2012, 05:51 AM)Rub87 As you stated, the map indeed changes, and not only slightl broadenign of the efficiency islands.. it has a important inpact on surge characteristics, and in this case it widens the map a healthy portionYes, that's the general belief.
Sorry, haven't been here in a while. Didn't you receive my emails, I sent you two if I remember correctly.
Om605 and Master Power R4449. 466nm@2900rpm
http://www.youtube.com/watch?v=QytQIE-eB...ature=plcp
Please use my email anton (at) hevosvoima.com to contact me. I try to follow the forums, but don't always have the time for it.
I put some of the units I have readily available on eBay. Prices include the shiping to the US.
For the European customers, the prices are w/out Finnish VAT. Please contact me directly and I will give you a quote.
(07-16-2012, 06:05 AM)Rub87 Nice looking clamps! do you know if there are for sale somewhere in europe for similar price?
Just anwered you on your PM. Like i said Master Powers are been good on what we are used on them, old ones. These MPR series are new all around and not tested own cars yet, but responce id´s been good example MPR 61-Magnum and 545-2.
Bui it, test it and tell all how good is it
Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
full potential of the Herlevi 8mm pump
quote='jeemu' pid='46071' dateline='1353101156']
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
(11-16-2012, 04:32 PM)Turbo full potential of the Herlevi 8mm pump[/quote]
quote='jeemu' pid='46071' dateline='1353101156']
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
Not even one suggestion Jeemu?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(11-16-2012, 04:32 PM)Turbo full potential of the Herlevi 8mm pump[/quote]
quote='jeemu' pid='46071' dateline='1353101156']
(11-16-2012, 04:06 PM)Turbo The R7277 and the R766 seams to be nice turbos, just a pitty they can not make higher pressure rateHi. What kind engine and power goal you have?
(11-16-2012, 03:00 AM)jeemu Some new models on stock.
54mm billet and 13.6cm turbinehousing
and 61mm billett 17cm turbinehousing
(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(11-22-2012, 04:32 PM)EDH_Performance(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
Two turbos, as in twin turbo or compoud turbo?
If we speaking Sequential turbo set up with master power I can not find something since the pressure rate of the turbos is to low and out of the compressor map (of the pressure ratio so compound like some say would be what I am looking for
about 0,8kg/s at 4,2 bar absolute pressure and the exhaust pressure must be lower then the boost pressure at least at full boost, something that can make the work of a Garrett GTX4202R on top and a Borg warner efr 6258/ 7163 on the bottom. 1 bars boost from 1500rpm is required because of it is going to be a daily driver
It would be interesting to se what jeemu can come up with, I am open minded
(11-22-2012, 04:32 PM)EDH_Performance(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
Two turbos, as in twin turbo or compoud turbo?
(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?What are specs on the engine?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?What are specs on the engine?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(11-24-2012, 01:03 PM)jeemu(11-22-2012, 03:59 PM)Turbo Not even one suggestion Jeemu?What are specs on the engine?
full power mean 270cc to 7200rpm 0m606.962
looking for two turbo
(12-19-2011, 02:36 PM)antonmies R4449-2, R474-3 or even R545-2 or 4 depending of wanted power output. But if the thing is the best low end and mid range, you should go with either 4449 or 474.
(12-19-2011, 02:36 PM)antonmies R4449-2, R474-3 or even R545-2 or 4 depending of wanted power output. But if the thing is the best low end and mid range, you should go with either 4449 or 474.
Try R444-2
I'm throwing these out now, business was too slow
Insane Prices
-Anton
(01-16-2013, 04:50 PM)antonmies I'm throwing these out now, business was too slow
Insane Prices
-Anton
(01-16-2013, 04:50 PM)antonmies I'm throwing these out now, business was too slow
Insane Prices
-Anton
PM replied.
MaKe, I think that Tarvikemotti has R545-7 in stock. Contact Jeemu to find if it's still available.