Craiglist alert thread
Craiglist alert thread
06-23-2012, 09:36 AM
#301
http://westernmass.craigslist.org/pts/3003149417.html
.
Gota love Mercedes Diesels!
.
DeliveryValve
06-23-2012, 09:36 AM #301BBS or BBS type basket weave wheels 15x7 - $300
http://westernmass.craigslist.org/pts/3003149417.html
.
Gota love Mercedes Diesels!
.
06-25-2012, 04:27 PM
#302
http://knoxville.craigslist.org/cto/3091802234.html
http://autos.yahoo.com/blogs/motoramic/s...56762.html
This post was last modified: 06-25-2012, 04:28 PM by willbhere4u.
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-25-2012, 04:27 PM #3021962 INTERNATIONAL GRANDAM
http://knoxville.craigslist.org/cto/3091802234.html
http://autos.yahoo.com/blogs/motoramic/s...56762.html
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
06-25-2012, 05:29 PM
#304
This post was last modified: 06-25-2012, 05:32 PM by willbhere4u.
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-25-2012, 05:29 PM #304for sale 1962 international truckcar, has every optional that a car could have ,has frontwheel drive driveline disk brakes all around , has air bags that are in working order has oldsmobile dash with tilt cruise , power seats , air -did work but i low of freon due from setting -can drive it anywhere, every light works as well as new cab lights allready has grandam door handles installed and work great, has alloy wheels and this truck has a good title which is titled as a international, has a grand am rear with the original duel exhaust, car is fuel injected and there are no check engine lights on?everthing is in working order but the aircondition is low of freon call if interested to much to list lots of time put in this car , have to many other projects to ,do so call 606 456 7738 -no emails please -price is firm -have probly twice as much invested .-this vehicle will be sold where is as is...thanks
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
06-26-2012, 10:47 PM
#305
http://fresno.craigslist.org/cto/3098703187.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
06-26-2012, 10:47 PM #305all kindsa sheeeeeyit
http://fresno.craigslist.org/cto/3098703187.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
06-27-2012, 05:56 AM
#306
http://bakersfield.craigslist.org/fod/3103271075.html
.
Gota love Mercedes Diesels!
.
DeliveryValve
06-27-2012, 05:56 AM #306Cheap w123 - 300 dollars.
http://bakersfield.craigslist.org/fod/3103271075.html
.
Gota love Mercedes Diesels!
.
06-30-2012, 04:17 PM
#307
(06-26-2012, 10:47 PM)sassparilla_kid all kindsa sheeeeeyit
http://fresno.craigslist.org/cto/3098703187.html
Damn, this guy has a real evo 2 factory body kit.
1983 300TD : 4 Speed : SLS Delete : More. Daily Deathcab
1987 190E/16v/OM603 : 5 Speed : SLS Delete : Lots More..W201 Project
(06-26-2012, 10:47 PM)sassparilla_kid all kindsa sheeeeeyit
http://fresno.craigslist.org/cto/3098703187.html
Damn, this guy has a real evo 2 factory body kit.
1983 300TD : 4 Speed : SLS Delete : More. Daily Deathcab
1987 190E/16v/OM603 : 5 Speed : SLS Delete : Lots More..W201 Project
07-04-2012, 01:36 AM
#308
http://cnj.craigslist.org/pts/3116830824.html
![[Image: 5Lf5Gc5H23Ga3F63Hac73937bb6c9a13b19dc.jpg]](http://images.craigslist.org/5Lf5Gc5H23Ga3F63Hac73937bb6c9a13b19dc.jpg)
.
This post was last modified: 07-04-2012, 01:36 AM by DeliveryValve.
Gota love Mercedes Diesels!
.
DeliveryValve
07-04-2012, 01:36 AM #308Ronal R9 wheels.
http://cnj.craigslist.org/pts/3116830824.html
.
Gota love Mercedes Diesels!
.
07-04-2012, 08:54 AM
#309
http://asheville.craigslist.org/cto/3086711858.html
.
Gota love Mercedes Diesels!
.
DeliveryValve
07-04-2012, 08:54 AM #309Not a diesel, but a Chevy 454 powered CD or CE.
http://asheville.craigslist.org/cto/3086711858.html
.
Gota love Mercedes Diesels!
.
07-04-2012, 04:52 PM
#310
(07-04-2012, 08:54 AM)DeliveryValve Not a diesel, but a Chevy 454 powered CD or CE.
http://asheville.craigslist.org/cto/3086711858.html
.
It has euro bumpers and a front spoiler to boot!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-04-2012, 04:52 PM #310(07-04-2012, 08:54 AM)DeliveryValve Not a diesel, but a Chevy 454 powered CD or CE.
http://asheville.craigslist.org/cto/3086711858.html
.
It has euro bumpers and a front spoiler to boot!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
07-16-2012, 10:17 PM
#311
Seen this thing at a car show a few months back... CRAZY ASS SHIT!!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
07-16-2012, 10:17 PM #311http://bloomington.craigslist.org/cto/3138793263.html
Seen this thing at a car show a few months back... CRAZY ASS SHIT!!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
07-19-2012, 09:20 AM
#312
all of the suspension and brakes have been rebuilt with Bilstine HD shocks and w126 vented brakes and more. It has power windows and a manual sunroof working CD player and heater but the AC compressor is missing it has the Rajay turbo kit and 4spd manual transmission
I'm hoping to get $1500 obo towards the down payment of my first home. This car has had a lot of work done to it but needs some metal patches on the LH front by the rocker/foot well other than that it is a very solid car
http://denver.craigslist.org/cto/3145831072.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
07-19-2012, 09:20 AM #312I am selling my 1980 240d turbo if any one is interested it still needs a bit of work but runs and drives
all of the suspension and brakes have been rebuilt with Bilstine HD shocks and w126 vented brakes and more. It has power windows and a manual sunroof working CD player and heater but the AC compressor is missing it has the Rajay turbo kit and 4spd manual transmission
I'm hoping to get $1500 obo towards the down payment of my first home. This car has had a lot of work done to it but needs some metal patches on the LH front by the rocker/foot well other than that it is a very solid car
http://denver.craigslist.org/cto/3145831072.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
08-03-2012, 12:49 PM
#313
Look Its my car!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
08-03-2012, 12:49 PM #313http://bloomington.craigslist.org/pts/3181569642.html
Look Its my car!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
08-27-2012, 12:01 AM
#314
http://catskills.craigslist.org/cto/3226130880.html
.
Gota love Mercedes Diesels!
.
DeliveryValve
08-27-2012, 12:01 AM #314Somebody in New York or near that area needs to snatch up this 300D if indeed it's a 5 speed...
http://catskills.craigslist.org/cto/3226130880.html
.
Gota love Mercedes Diesels!
.
08-27-2012, 12:25 AM
#315
http://seattle.craigslist.org/see/pts/3206668352.html
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
08-27-2012, 12:25 AM #315Holset HX35w $500, no affiliation with the seller. Looks clean in the pix:
http://seattle.craigslist.org/see/pts/3206668352.html
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
08-27-2012, 11:36 PM
#316
http://losangeles.craigslist.org/sfv/cto...40115.html
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
I want this..
http://losangeles.craigslist.org/sfv/cto...40115.html
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
08-28-2012, 09:49 AM
#317
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-28-2012, 09:49 AM #317euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
08-28-2012, 11:36 AM
#318
(08-28-2012, 09:49 AM)willbhere4u euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html
That's hot!
I also dig this fella's other vehicle.
.
Attached Files
Image(s)Gota love Mercedes Diesels!
.
DeliveryValve
08-28-2012, 11:36 AM #318(08-28-2012, 09:49 AM)willbhere4u euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html
That's hot!
I also dig this fella's other vehicle.
.
Attached Files
Image(s)Gota love Mercedes Diesels!
.
08-29-2012, 02:27 PM
#320
This post was last modified: 08-29-2012, 02:29 PM by willbhere4u.
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-29-2012, 02:27 PM #320190 2.3-16 valve cosworth dog leg 5spd http://denver.craigslist.org/cto/3237442690.html
Attached Files
Image(s)1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
09-02-2012, 10:18 PM
#321
http://cgi.ebay.com/ebaymotors/1964-Merc...1c2ad8c129
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
09-02-2012, 10:18 PM #321190d camper
http://cgi.ebay.com/ebaymotors/1964-Merc...1c2ad8c129
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-12-2012, 01:53 AM
#322
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
http://atlanta.craigslist.org/nat/pts/3306278322.html CLK wheels for $100
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-12-2012, 11:16 AM
#323
http://baltimore.craigslist.org/cto/3217513676.html
Homemade 300T pickup conversion. I don't have the space or time...although it's a wild concept. Went and checked it out.
Simpler=Better It turned out to be pretty rusty-the welded on passenger doors had been rusting out on the bottom, and into the wheel well.
The rear windows and corners are from a K car, and there was some cracking in the paint...which makes me think of flexing.
Driver's seat belts and rear seat mount bolts weren't bolted in due to a PO's hackjob floor pan repair. Legroom is surprisingly large-the cabin was made with the seat all the way back and slightly reclined.
SLS was squatting and described as "sticky"-it apparently will start working if you drive around for half an hour or so.
We jumped the car from his truck, it started up really well. Cold engine, 65* ambient. Fired on all 5. Rotted exhaust
Minor transmission slip-the classic 1-2 flare and short shift into 4th. Actually held the gears better than most 123's I've test driven.
The tailgate was a chopped up back hatch, and is removable. Looks good, a little loose. Not hinged, but it kinda sets down into the bed and is held in place with the sliding door locks you find in a bathroom stall. The bed is made of sheetl steel on unknown thickness. When he walked on it to demo it did bow ever so slightly.
It looked like a beautiful build, once upon a time. I'm going to see if my brother wants it-he has a lift and all the goodies. I'm stuck in apartment land so there's no hope of doing bodywork.
See photos below:
![[Image: truck2k.jpg]](http://imageshack.us/a/img707/8499/truck2k.jpg)
![[Image: truck1ip.jpg]](http://imageshack.us/a/img266/933/truck1ip.jpg)
![[Image: passengerrearwheelwell.jpg]](http://imageshack.us/a/img191/9118/passengerrearwheelwell.jpg)
![[Image: driverrearwheel.jpg]](http://imageshack.us/a/img40/9638/driverrearwheel.jpg)
![[Image: bpillar.jpg]](http://imageshack.us/a/img9/6602/bpillar.jpg)
This post was last modified: 10-12-2012, 11:17 AM by Simpler=Better.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-12-2012, 11:16 AM #323CRD4x4 found this one:
http://baltimore.craigslist.org/cto/3217513676.html
Homemade 300T pickup conversion. I don't have the space or time...although it's a wild concept. Went and checked it out.
Simpler=Better It turned out to be pretty rusty-the welded on passenger doors had been rusting out on the bottom, and into the wheel well.
The rear windows and corners are from a K car, and there was some cracking in the paint...which makes me think of flexing.
Driver's seat belts and rear seat mount bolts weren't bolted in due to a PO's hackjob floor pan repair. Legroom is surprisingly large-the cabin was made with the seat all the way back and slightly reclined.
SLS was squatting and described as "sticky"-it apparently will start working if you drive around for half an hour or so.
We jumped the car from his truck, it started up really well. Cold engine, 65* ambient. Fired on all 5. Rotted exhaust
Minor transmission slip-the classic 1-2 flare and short shift into 4th. Actually held the gears better than most 123's I've test driven.
The tailgate was a chopped up back hatch, and is removable. Looks good, a little loose. Not hinged, but it kinda sets down into the bed and is held in place with the sliding door locks you find in a bathroom stall. The bed is made of sheetl steel on unknown thickness. When he walked on it to demo it did bow ever so slightly.
It looked like a beautiful build, once upon a time. I'm going to see if my brother wants it-he has a lift and all the goodies. I'm stuck in apartment land so there's no hope of doing bodywork.
See photos below:
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
10-13-2012, 01:33 AM
#324
http://seattle.craigslist.org/sno/pts/3334124893.html
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
10-13-2012, 01:33 AM #324Four AMG rims with Pirelli tires, front two are 8.5/18s the back two are 9.5/18, about two hours north of me:
http://seattle.craigslist.org/sno/pts/3334124893.html
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
10-21-2012, 11:57 PM
#325
http://fresno.craigslist.org/cto/3231739127.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-21-2012, 11:57 PM #325Can somebody please tell me if this is a good deal and whether or not I should buy it so I can stop looking at the ad every time I search craigslist 1963 190D FINTAIL!!!!!
http://fresno.craigslist.org/cto/3231739127.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
10-22-2012, 04:11 AM
#326
You should check it out.
.
Gota love Mercedes Diesels!
.
DeliveryValve
10-22-2012, 04:11 AM #326^^^ That looks like a good deal. If I had room, I'd consider it!
You should check it out.
.
Gota love Mercedes Diesels!
.
10-22-2012, 02:02 PM
#327
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-22-2012, 02:02 PM #327I'll call this week some time. I would need to get rid of the parts car to make room though. On the other hand, I would essentially have my 3 dream Mercedes. It is very tempting.....
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
10-22-2012, 02:38 PM
#328
$$-per-lb/hp it's astronomically cheaper than a Mercedes....gets like 30mpg...
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-22-2012, 02:38 PM #328Can you stash the parts car somewhere? I've got 5 project vehicles stashed across 2 states. Unrelated: wanna buy a cheap sportbike? $$-per-lb/hp it's astronomically cheaper than a Mercedes....gets like 30mpg...
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
10-23-2012, 03:43 AM
#329
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-23-2012, 03:43 AM #329The only reason the parts car is still here is because I haven't taken the engine/trans out yet lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
10-26-2012, 03:56 PM
#330
http://sandiego.craigslist.org/csd/pts/3355052678.html
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
10-26-2012, 03:56 PM #330not mine, but here's an OM601 in the East County San Diego area:
http://sandiego.craigslist.org/csd/pts/3355052678.html
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
10-26-2012, 04:22 PM
#331
http://chicago.craigslist.org/nch/cto/3366107362.html
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
If this is the real thing.......
http://chicago.craigslist.org/nch/cto/3366107362.html
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
11-28-2012, 01:10 AM
#332
http://indianapolis.craigslist.org/cto/3326244240.html
![[Image: 5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg]](http://images.craigslist.org/5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg)
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
11-29-2012, 12:00 PM
#333
(11-28-2012, 01:10 AM)larsalan Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
Now that's a car to get!
BTW - My eyes might be deceived, but they look to me like it has 15 inch bundts. If that's true, that's already worth the purchase price.
.
Gota love Mercedes Diesels!
.
DeliveryValve
11-29-2012, 12:00 PM #333(11-28-2012, 01:10 AM)larsalan Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
Now that's a car to get!
BTW - My eyes might be deceived, but they look to me like it has 15 inch bundts. If that's true, that's already worth the purchase price.
.
Gota love Mercedes Diesels!
.
11-29-2012, 05:25 PM
#334
Just seen a wagon here in town too. http://bloomington.craigslist.org/cto/3443114460.html
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
I'd have that one for sure if I had even close to $1k.
Just seen a wagon here in town too. http://bloomington.craigslist.org/cto/3443114460.html
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
12-06-2012, 06:41 PM
#335
http://denver.craigslist.org/cto/3458634267.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-06-2012, 06:41 PM #335Super rare 1985 BMW 524td turbo diesel $3500 86k
http://denver.craigslist.org/cto/3458634267.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
12-31-2012, 12:39 PM
#336
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-31-2012, 12:39 PM #336350 chevy in 240d $1500 http://denver.craigslist.org/cto/3512412322.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
01-19-2013, 09:28 PM
#337
http://cincinnati.craigslist.org/cto/3546369556.html
dunno why it 'doesnt run' I thought 617 would run no matter what
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
heres a ok looking w123 in ohio
http://cincinnati.craigslist.org/cto/3546369556.html
dunno why it 'doesnt run' I thought 617 would run no matter what
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
01-20-2013, 10:44 PM
#338
http://indianapolis.craigslist.org/cto/3560190137.html
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
603 in a w124 in indy
http://indianapolis.craigslist.org/cto/3560190137.html
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
01-23-2013, 06:55 PM
#339
http://fresno.craigslist.org/cto/3563403626.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-23-2013, 06:55 PM #339I may end up getting this
http://fresno.craigslist.org/cto/3563403626.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-23-2013, 09:37 PM
#341
(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?
I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-23-2013, 09:37 PM #341(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?
I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-24-2013, 05:29 PM
#342
(01-23-2013, 09:37 PM)sassparilla_kid(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?
I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D
Turn up the modulator and dump in some transmission fixa-seal crap. Helped me limp mine another 2k.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-24-2013, 05:29 PM #342(01-23-2013, 09:37 PM)sassparilla_kid(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?
I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D
Turn up the modulator and dump in some transmission fixa-seal crap. Helped me limp mine another 2k.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
02-13-2013, 09:49 PM
#343
http://washingtondc.craigslist.org/mld/p...11500.html
No affiliation
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
I wish there were pics...
http://washingtondc.craigslist.org/mld/p...11500.html
No affiliation
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
03-07-2013, 11:43 PM
#344
http://visalia.craigslist.org/cto/3614236830.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-07-2013, 11:43 PM #344Me want
http://visalia.craigslist.org/cto/3614236830.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-08-2013, 11:25 AM
#345
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-08-2013, 11:25 AM #345^me to
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
03-08-2013, 11:10 PM
#347
(03-08-2013, 03:43 PM)winmutt(03-08-2013, 11:25 AM)willbhere4u ^me to
That is an absolute steal. I wonder what's wrong with it.
It says "runs and drives fine", I think the problem is called parking and insurance and registration and not great mileage and replacing tires lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-08-2013, 11:10 PM #347(03-08-2013, 03:43 PM)winmutt(03-08-2013, 11:25 AM)willbhere4u ^me to
That is an absolute steal. I wonder what's wrong with it.
It says "runs and drives fine", I think the problem is called parking and insurance and registration and not great mileage and replacing tires lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-22-2013, 03:58 AM
#348
38lb flywheel 617
" straighten up that star on the grill, assholes."
lgreeley83
03-22-2013, 03:58 AM #348http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtr
38lb flywheel 617
" straighten up that star on the grill, assholes."
03-22-2013, 08:36 AM
#349
(03-22-2013, 03:58 AM)lgreeley83 http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtrHoly crap. Those things are getting so expensive I've been thinking about casting them myself.
38lb flywheel 617
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
03-22-2013, 08:36 AM #349(03-22-2013, 03:58 AM)lgreeley83 http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtrHoly crap. Those things are getting so expensive I've been thinking about casting them myself.
38lb flywheel 617
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
04-07-2013, 01:24 PM
#350
http://sfbay.craigslist.org/pen/pts/3718541948.html
This post was last modified: 04-07-2013, 01:25 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-07-2013, 01:24 PM #350Non-egr manifolds, or so it looks
http://sfbay.craigslist.org/pen/pts/3718541948.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
Users browsing this thread:
39 Guest(s)
39 Guest(s)
Users browsing this thread:
39 Guest(s)
39 Guest(s)