How to adapt a W201 5-speed to OM616/OM617 applications
How to adapt a W201 5-speed to OM616/OM617 applications
07-24-2012, 07:17 PM
#51
jm
Austincarnut
07-24-2012, 07:17 PM #51I just stumbled upon your post and have to say I was impressed. Have you ever considered building these to sell? please email me if you would consider doing this.
jm
01-25-2014, 04:20 AM
#53
190Erur rur
01-25-2014, 04:20 AM #53does anybody have a pic of a 190E 4 speed front cover in the bell housing area??? i have an 85 eurobenz with a 2.0L single mass flywheel, a 4 sp 716.216 manual. pricing a replacement. not torn down yet... something went SNAP. years ago we had it apart and i swear the input cover and tube for the throwout to slide on is part of the case and not removeable. am i right or wrong
01-28-2014, 11:18 PM
#54
(01-25-2014, 04:20 AM)190Erur rur does anybody have a pic of a 190E 4 speed front cover in the bell housing area??? i have an 85 eurobenz with a 2.0L single mass flywheel, a 4 sp 716.216 manual. pricing a replacement. not torn down yet... something went SNAP. years ago we had it apart and i swear the input cover and tube for the throwout to slide on is part of the case and not removeable. am i right or wrongi received an answer to my question from stretch and sternschnuppe on benzworld. the bearing tube is incorporated into the front cover, has 6 bolts, and could be replaced from another gearbox. i have yet to determine if it can be had from the dealer, or sleeved.. etc. in the heavy truck shop we had this ( sort of )part 1 out of 3 times getting some kind of service or repair when repeat repairs were eating clutch parts regardless of the make. stretch has a pic of a 716.217 4 speed view into the bellhousing, fork and bearing are removed for access to view. whataniceaguy!
This post was last modified: 01-28-2014, 11:29 PM by 190Erur rur.
190Erur rur
01-28-2014, 11:18 PM #54(01-25-2014, 04:20 AM)190Erur rur does anybody have a pic of a 190E 4 speed front cover in the bell housing area??? i have an 85 eurobenz with a 2.0L single mass flywheel, a 4 sp 716.216 manual. pricing a replacement. not torn down yet... something went SNAP. years ago we had it apart and i swear the input cover and tube for the throwout to slide on is part of the case and not removeable. am i right or wrongi received an answer to my question from stretch and sternschnuppe on benzworld. the bearing tube is incorporated into the front cover, has 6 bolts, and could be replaced from another gearbox. i have yet to determine if it can be had from the dealer, or sleeved.. etc. in the heavy truck shop we had this ( sort of )part 1 out of 3 times getting some kind of service or repair when repeat repairs were eating clutch parts regardless of the make. stretch has a pic of a 716.217 4 speed view into the bellhousing, fork and bearing are removed for access to view. whataniceaguy!
Transplantmoto
Unregistered
05-31-2021, 05:29 PM
#55
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)