My 1987 300D
My 1987 300D
10-05-2011, 01:02 PM
#151
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
10-05-2011, 01:02 PM #151yea get that new head on so i can have those injectors
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
10-09-2011, 09:07 PM
#152
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Third time is the charm, no leaks at all now. Just tightened up the tstat housing some for the coolant. For the oil, I went back to the stock fitting and drain pipe. The drain pipe I chopped near the bottom, about 1" before it starts to flare out and put some rubber hose in to fill the gap. Works like a champ. Even though the pipe is only a compression fitting at the top, the rubber hose and oring hold it in place. Gonna drive it around this week and report back with pictures of the final product.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
11-16-2011, 08:33 AM
#153
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
11-16-2011, 08:33 AM #153i know you have your fancy new job but any updates?!?
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
02-20-2012, 06:40 PM
#154
This post was last modified: 02-20-2012, 08:50 PM by winmutt.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Good things come to those that wait. I think this is going to be a good summer for my STDs. I have been in the talks with Diesel Meken and am ready to pull my pump. I have a #22 head with 2.5 prechambers out and 3.5 more to go before its off to the shop. Seems the best way to do this labor wise is all at once. #22 head, 606hg, new chain, uprated pump, different turbo (getting a HX30W over the HY30W).
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
02-20-2012, 11:49 PM
#155
jonbobshinigin
02-20-2012, 11:49 PM #155Um, I need to get in on this action. Maybe I can come up for a few days and get me a new head and do all of the following as well! I'm exactly serious.
04-24-2012, 07:13 PM
#157
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Finally got the prechambers pulled out, dropped off head at highly recommended Will's Machine Shop and it was cleaned, pressure tested and resurfaced in 2 hours. I honestly thought they were calling me to tell me bad news.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
04-25-2012, 08:34 AM
#158
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
04-25-2012, 08:34 AM #158sweet. what did the machining cost you?
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
04-26-2012, 01:31 PM
#160
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
04-26-2012, 01:31 PM #160mmm nice.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
04-26-2012, 09:48 PM
#161
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-26-2012, 09:48 PM #161wow that's fast!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
08-28-2012, 06:18 PM
#163
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
08-28-2012, 06:18 PM #163HD's are awesome, I too installed some this weekend, all around. Much stiffer in the corners, still smooth over bumps!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
08-28-2012, 07:53 PM
#164
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Dunno about smooth bumps, not compared to your average american care from the 70's but I certainly feel the need for a sway bar!
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-29-2012, 12:29 AM
#165
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
08-29-2012, 12:29 AM #165Well, I mean it isn't overly harsh, or too stiff for comfort. Still rides well. And yes sway bar sounds like a good idea too haha
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
08-29-2012, 05:49 PM
#166
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-29-2012, 05:49 PM #166I loved the HD's on my 240d It road firm but not ruff
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-08-2012, 12:39 PM
#167
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
A little bird dropped into day and left me a message about a very heavy box on its way from somewhere yet unknown... SSSSHHHHH BE VERY QUIET, DONT SCARE THE BOX AWAY.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-08-2012, 05:31 PM
#169
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Word on the bookface is Goran delivered a pump to that neck of the woods...
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
10-12-2012, 07:42 AM
#171
Quote:it's awfully dark in here
Quote:Datum Date
10 okt kl 21:14 U.S.A., The item has arrived at the international terminal in the destination country for sorting.
9 okt kl 04:21 Stockholm EMS, The item has been dispatched from Posten´s international terminal for onward transport abroad.
9 okt kl 01:36 Stockholm EMS, The item has arrived at Posten´s international terminal for sorting and transport abroad.
8 okt kl 18:35 Nässjö, Departure registered at letter terminal
8 okt kl 17:56 Posten Aneby, The item has been redirected within Posten to a sorting terminal.
8 okt kl 17:13 Coop Konsum Aneby, The item has been redirected within Posten to a sorting terminal.
8 okt kl 16:46 Coop Konsum Aneby, The item has been deposited.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Quote:it's awfully dark in here
Quote:Datum Date
10 okt kl 21:14 U.S.A., The item has arrived at the international terminal in the destination country for sorting.
9 okt kl 04:21 Stockholm EMS, The item has been dispatched from Posten´s international terminal for onward transport abroad.
9 okt kl 01:36 Stockholm EMS, The item has arrived at Posten´s international terminal for sorting and transport abroad.
8 okt kl 18:35 Nässjö, Departure registered at letter terminal
8 okt kl 17:56 Posten Aneby, The item has been redirected within Posten to a sorting terminal.
8 okt kl 17:13 Coop Konsum Aneby, The item has been redirected within Posten to a sorting terminal.
8 okt kl 16:46 Coop Konsum Aneby, The item has been deposited.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-12-2012, 04:50 PM
#172
Quote:Why does it smell like chinese food and bagels?
Quote:Processed Through Sort Facility
October 10, 2012, 9:14 pm
ISC NEW YORK NY(USPS)
I'm not excited... at all....
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Quote:Why does it smell like chinese food and bagels?
Quote:Processed Through Sort Facility
October 10, 2012, 9:14 pm
ISC NEW YORK NY(USPS)
I'm not excited... at all....
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-13-2012, 10:37 AM
#173
(10-12-2012, 04:50 PM)winmuttQuote:Why does it smell like chinese food and bagels?
Quote:Processed Through Sort Facility
October 10, 2012, 9:14 pm
ISC NEW YORK NY(USPS)
I'm not excited... at all....
How much was the shipping to Atlanta I was wondering this because I am in the process of purchasing one myself?
(10-12-2012, 04:50 PM)winmuttQuote:Why does it smell like chinese food and bagels?
Quote:Processed Through Sort Facility
October 10, 2012, 9:14 pm
ISC NEW YORK NY(USPS)
I'm not excited... at all....
How much was the shipping to Atlanta I was wondering this because I am in the process of purchasing one myself?
10-14-2012, 11:02 AM
#176
Governor 6000rpm full load.
Low idle 650-700rpm
I think this will be enough for a nice 300hp daily drive car.
dieselmeken
10-14-2012, 11:02 AM #176Me too, Waiting for it to be installed and tested out. Pump is 7,5mm,serie 1 element, 4 degrees later ignintion at low idle RS157-1 with ALDA, Adjusted to 65cc no boost -125cc 1,5bar boost @1500rpm,
Governor 6000rpm full load.
Low idle 650-700rpm
I think this will be enough for a nice 300hp daily drive car.
10-18-2012, 06:47 AM
#179
dieselmeken
10-18-2012, 06:47 AM #179Hopfully you have your pump soon. I dont understand why customs take so long, I have declared it with the correct "whatisitinsidetheparcel number" and everything.
10-22-2012, 10:55 AM
#183
(10-19-2012, 09:50 PM)BigAssCFotPrint How much was shipping each way? What service? I'd like to see a vid if possible.
$169 express mail 1 way. Missed parcel notice was on the door Sat. Picking it up tonight.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(10-19-2012, 09:50 PM)BigAssCFotPrint How much was shipping each way? What service? I'd like to see a vid if possible.
$169 express mail 1 way. Missed parcel notice was on the door Sat. Picking it up tonight.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-22-2012, 12:13 PM
#184
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-22-2012, 12:13 PM #184There will be a running video around 2am right?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
10-22-2012, 05:30 PM
#185
![[Image: 7.5mm.dieselmeken.jpg]](http://www.superturbodiesel.com/images/benz/w124.1987.300d/7.5mm.dieselmeken.jpg)
Oh I am sorely tempted to mount this today. However, I've got the week of thanksgiving planned for a #22 head, new hx30w and this beast.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Oh I am sorely tempted to mount this today. However, I've got the week of thanksgiving planned for a #22 head, new hx30w and this beast.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-23-2012, 12:24 AM
#186
(10-22-2012, 05:30 PM)winmutt
Oh I am sorely tempted to mount this today. However, I've got the week of thanksgiving planned for a #22 head, new hx30w and this beast.
Why not? If you blow a head gasket, you don't have to do it twice!
.
Gota love Mercedes Diesels!
.
DeliveryValve
10-23-2012, 12:24 AM #186(10-22-2012, 05:30 PM)winmutt
Oh I am sorely tempted to mount this today. However, I've got the week of thanksgiving planned for a #22 head, new hx30w and this beast.
Why not? If you blow a head gasket, you don't have to do it twice!
.
Gota love Mercedes Diesels!
.
10-23-2012, 07:57 AM
#187
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-23-2012, 07:57 AM #187Easiest way to remove a head is to blow it off with 500cc of fuel
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
10-24-2012, 11:10 AM
#191
(10-23-2012, 09:15 PM)BigAssCFotPrint Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources?
Atlanta craigslist.
raysorenson
10-24-2012, 11:10 AM #191(10-23-2012, 09:15 PM)BigAssCFotPrint Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources?
Atlanta craigslist.
10-24-2012, 01:06 PM
#192
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
"Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources? "
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
10-24-2012, 06:03 PM
#193
(10-24-2012, 01:06 PM)Greazzer "Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources? "
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Well if you see a good one, let me know.
(10-24-2012, 01:06 PM)Greazzer "Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources? "
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Well if you see a good one, let me know.
10-25-2012, 07:37 AM
#194
(10-24-2012, 06:03 PM)BigAssCFotPrint(10-24-2012, 01:06 PM)Greazzer "Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources? "
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Well if you see a good one, let me know.
Easiest way to handle this is send him $50 + a tip for pulling it, and once he's got one send him the $$ to ship it.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-25-2012, 07:37 AM #194(10-24-2012, 06:03 PM)BigAssCFotPrint(10-24-2012, 01:06 PM)Greazzer "Anyway one know where I can find a 87 300D turbo pump? Any good, cheap sources? "
I can grab one at the yards. They pop up around every other month, except the problem is getting one and then getting stuck with it because the buyer either backs out or finds another source. They are about $50.00 without warranty at the yards.
Well if you see a good one, let me know.
Easiest way to handle this is send him $50 + a tip for pulling it, and once he's got one send him the $$ to ship it.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
11-12-2012, 08:58 PM
#196
606 hg
![[Image: 2012-11-11%252020.00.54.jpg]](https://lh6.googleusercontent.com/-otKkYiqRa1c/UKF1DmcSotI/AAAAAAAAteQ/0RDpP5ob0Lw/s576/2012-11-11%252020.00.54.jpg)
new hx30
![[Image: 2012-11-11%252020.00.36.jpg]](https://lh5.googleusercontent.com/-oTogIu5n7zc/UKF2OsH5XGI/AAAAAAAAtfA/uY_doFYY-AQ/s576/2012-11-11%252020.00.36.jpg)
poly trans mount it curing
![[Image: 2012-11-11%252020.00.31.jpg]](https://lh6.googleusercontent.com/-pxn8-mH-M-g/UKF2CDOAm0I/AAAAAAAAte4/5YNFHOpzYUY/s576/2012-11-11%252020.00.31.jpg)
gorans pump
![[Image: 2012-11-11%252020.00.27.jpg]](https://lh3.googleusercontent.com/-4lKxymt3se8/UKF1n_EOjLI/AAAAAAAAtew/3PWh072vYps/s576/2012-11-11%252020.00.27.jpg)
#22 head
![[Image: 2012-11-11%252020.00.45.jpg]](https://lh5.googleusercontent.com/--tJGS5aE8gM/UKF1Yaxa1VI/AAAAAAAAteg/hbqS7kTjGTU/s512/2012-11-11%252020.00.45.jpg)
chain tensioner and 2 bicycle bells
![[Image: 2012-11-11%252020.00.49.jpg]](https://lh6.googleusercontent.com/-pdx3lfSy6B4/UKF1Oy-dArI/AAAAAAAAteY/iRMcT_ifYrs/s512/2012-11-11%252020.00.49.jpg)
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
I am almost ready for turkey week...
606 hg
new hx30
poly trans mount it curing
gorans pump
#22 head
chain tensioner and 2 bicycle bells
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
11-13-2012, 12:02 AM
#197
jonbobshinigin
11-13-2012, 12:02 AM #197I can't wait...I have everything but a pump and my new 22 head installed. I do have an HX35 however so depending on how your install goes, I will get to decide whether to down it a size. I'm very interested in your plan for intercooling!
11-15-2012, 08:13 PM
#200
jonbobshinigin
11-15-2012, 08:13 PM #200Winmutt, my special 603 guinea pig; a brave pioneer on the side of the ocean. I cannot wait to see your success! In addition to power, I Hope to see some better fuel mileage, though I doubt that will happen for several tanks into the project.
Users browsing this thread:
64 Guest(s)
64 Guest(s)
Users browsing this thread:
64 Guest(s)
64 Guest(s)