racing camshafts for om606
racing camshafts for om606
11-28-2012, 02:47 PM
#2
(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
EDH_Performance
11-28-2012, 02:47 PM #2(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
11-28-2012, 03:01 PM
#4
(11-28-2012, 02:58 PM)artuur(11-28-2012, 02:47 PM)EDH_Performance(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur
They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine
They also sells bolt on valvesprings that can handle up to 8000rpm! I have the springs in my engine
EDH_Performance
11-28-2012, 03:01 PM #4(11-28-2012, 02:58 PM)artuur(11-28-2012, 02:47 PM)EDH_Performance(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur
They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine
They also sells bolt on valvesprings that can handle up to 8000rpm! I have the springs in my engine
11-28-2012, 03:11 PM
#5
(11-28-2012, 03:01 PM)EDH_Performance(11-28-2012, 02:58 PM)artuur(11-28-2012, 02:47 PM)EDH_Performance kmcams.com regrinds to your spesifications
I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur
They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine
ok
question about the valve spring shims ?
the original ones dont fit with new springs ? what needs do be done with new shims?
The valves will be ordered next week
(11-28-2012, 03:01 PM)EDH_Performance(11-28-2012, 02:58 PM)artuur(11-28-2012, 02:47 PM)EDH_Performance kmcams.com regrinds to your spesifications
I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur
They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine
ok
question about the valve spring shims ?
the original ones dont fit with new springs ? what needs do be done with new shims?
The valves will be ordered next week
11-28-2012, 03:23 PM
#6
the race springs is not so wide in the botom as the stock ones, so the spring won`t fit on the stock bottom shims!
So you need to make a flat shims, as thin as you can find! I used some washer, for bolts/nuts (local hardwear store). I used some washer that was about 1.5mm thick, and abit bigger diameter than the springs...I had to drill the senter hole a bit bigger to go over the valvestem seal
Easy fix!Look at the pictures in my project thread
EDH_Performance
11-28-2012, 03:23 PM #6As you now, the stock springs is wider in the botom than the top...
the race springs is not so wide in the botom as the stock ones, so the spring won`t fit on the stock bottom shims!
So you need to make a flat shims, as thin as you can find! I used some washer, for bolts/nuts (local hardwear store). I used some washer that was about 1.5mm thick, and abit bigger diameter than the springs...I had to drill the senter hole a bit bigger to go over the valvestem seal Easy fix!
Look at the pictures in my project thread
11-28-2012, 07:37 PM
#7
(11-28-2012, 02:47 PM)EDH_Performancehi,(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?
(11-28-2012, 02:47 PM)EDH_Performancehi,(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?
11-29-2012, 07:00 AM
#8
(11-28-2012, 07:37 PM)mantahead(11-28-2012, 02:47 PM)EDH_Performancehi,(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?
I dont know, mine revs to 6100rpm...N/A shafts works good, but for extreme power you need to look at some performance shafts
EDH_Performance
11-29-2012, 07:00 AM #8(11-28-2012, 07:37 PM)mantahead(11-28-2012, 02:47 PM)EDH_Performancehi,(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?
kmcams.com regrinds to your spesifications
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?
I dont know, mine revs to 6100rpm...N/A shafts works good, but for extreme power you need to look at some performance shafts
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)