dual pump
dual pump
12-07-2012, 02:56 AM
#1
two round 5.5mm openings are a bit bigger than a single 7.5mm one.
ready to hear that i am crazy.
thanks,
aaron.
This post was last modified: 12-07-2012, 03:00 AM by bricktron.
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
it would require some seriously creative fitment, but has anyone tried hooking up two 617 injection pumps in parallel?
two round 5.5mm openings are a bit bigger than a single 7.5mm one.
ready to hear that i am crazy.
thanks,
aaron.
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
12-07-2012, 04:12 AM
#2
(12-07-2012, 02:56 AM)bricktron it would require some seriously creative fitment, but has anyone tried hooking up two 617 injection pumps in parallel?Whats the purpose? And yes, thats crazy.
two round 5.5mm openings are a bit bigger than a single 7.5mm one.
ready to hear that i am crazy.
thanks,
aaron.
Its not all about the size,5,5+5,5=11 vs 7,5 Its much moore, duration on element etc etc.
However, i did see a clip on youtube 6,2L Chevy V8 diesel with 2 Stanadyne DB2 pumps side by side.
dieselmeken
12-07-2012, 04:12 AM #2(12-07-2012, 02:56 AM)bricktron it would require some seriously creative fitment, but has anyone tried hooking up two 617 injection pumps in parallel?Whats the purpose? And yes, thats crazy.
two round 5.5mm openings are a bit bigger than a single 7.5mm one.
ready to hear that i am crazy.
thanks,
aaron.
Its not all about the size,5,5+5,5=11 vs 7,5 Its much moore, duration on element etc etc.
However, i did see a clip on youtube 6,2L Chevy V8 diesel with 2 Stanadyne DB2 pumps side by side.
DirtDiesel
12-07-2012, 12:05 PM #3i know they do it for the cummins thats as far as i know about it
LiL Micky
12-07-2012, 12:06 PM
#4
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
12-07-2012, 12:06 PM #4It could be done with a modified block by driving the second IP from a second chain hooked to the vacuum pump sprocket. Timing it accurately would be insane.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
12-08-2012, 12:48 PM
#8
(12-08-2012, 12:21 PM)Volker407 What engine are you talking about? If OM617A then you can go up to 10mm elements with one pump and that will be far enough to drown any OM617A I have seen until now.
Gruß
Volker
LOL...There are 12mm elements that can be had, but they require heavy mods to the pump housing. I mean if the goal is to go crazy.....
(12-08-2012, 12:21 PM)Volker407 What engine are you talking about? If OM617A then you can go up to 10mm elements with one pump and that will be far enough to drown any OM617A I have seen until now.
Gruß
Volker
LOL...There are 12mm elements that can be had, but they require heavy mods to the pump housing. I mean if the goal is to go crazy.....
12-08-2012, 01:45 PM
#9
(12-08-2012, 12:21 PM)Volker407 What engine are you talking about? If OM617A then you can go up to 10mm elements with one pump and that will be far enough to drown any OM617A I have seen until now.
Gruß
Volker
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
yes Volker, just curious about solutions that do not involve sending thousands of euros to Finland
(12-08-2012, 12:21 PM)Volker407 What engine are you talking about? If OM617A then you can go up to 10mm elements with one pump and that will be far enough to drown any OM617A I have seen until now.
Gruß
Volker
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Users browsing this thread:
4 Guest(s)
4 Guest(s)