Blown Head Gasket?
Blown Head Gasket?
12-14-2012, 01:39 PM
#1
If it is blown and I go to replace it, has anyone had experience o-ringing or fire ringing the head?
Just a thought...
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Well guys, I am pretty sure my HG is blown. I've noticed anti-freeze disappearing lately and found where it is running off the back of the head and down the bellhousing. Obvoiusly its not squirting profusely, but enough to smell it and see it.
If it is blown and I go to replace it, has anyone had experience o-ringing or fire ringing the head?
Just a thought...
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
12-14-2012, 04:03 PM
#2
Try mls gasket if you can get one, should show some new fuses elsewhere.
Yup pretty much HG issue. My OM602.982 did that @ 240k km. Small external leakage around fifth cylinder and dropping down to bellhousing. The gasket was moving very slightly on the block.
Try mls gasket if you can get one, should show some new fuses elsewhere.
12-15-2012, 06:15 PM
#4
But it almost has to be. I looked for a mls gasket and couldn't find one. I know cometic can custom make one but I figure that would be lots of $$$.
You guys think just re surface the head and put a stock gasket back on it? I run more than stock boost, but I limit it to 18 which I've read is plenty, and if goes as planned I should have a he221 on the way and a w115 intake.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
I didn't think it was common either
But it almost has to be. I looked for a mls gasket and couldn't find one. I know cometic can custom make one but I figure that would be lots of $$$.
You guys think just re surface the head and put a stock gasket back on it? I run more than stock boost, but I limit it to 18 which I've read is plenty, and if goes as planned I should have a he221 on the way and a w115 intake.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
12-15-2012, 09:09 PM
#5
The head can be one man lifted but it's HEAVY. Like 100lb HEAVY
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
12-15-2012, 09:09 PM #5Sure it's not your monovalve leaking? Or the heater core connections?
The head can be one man lifted but it's HEAVY. Like 100lb HEAVY
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
12-16-2012, 10:02 AM
#6
(12-15-2012, 09:09 PM)Simpler=Better Sure it's not your monovalve leaking? Or the heater core connections?
The head can be one man lifted but it's HEAVY. Like 100lb HEAVY
Yeah pretty sure, you can see it seeping out of the back of the head.
I know they are heavy, I picked my spare head up the other day to carry it to the shop to make a prechamber puller, and they sure aren't light
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
(12-15-2012, 09:09 PM)Simpler=Better Sure it's not your monovalve leaking? Or the heater core connections?
The head can be one man lifted but it's HEAVY. Like 100lb HEAVY
Yeah pretty sure, you can see it seeping out of the back of the head.
I know they are heavy, I picked my spare head up the other day to carry it to the shop to make a prechamber puller, and they sure aren't light
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
12-20-2012, 10:29 PM
#7
I've bought from performanceparts before and their stuff is pretty good but expensive.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Where do you guys recommend buying parts from?
I've bought from performanceparts before and their stuff is pretty good but expensive.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
12-21-2012, 04:46 AM
#8
(12-20-2012, 10:29 PM)MFSuper90 Where do you guys recommend buying parts from?Autohausaz.com buymbparts.biz or classic center.
I've bought from performanceparts before and their stuff is pretty good but expensive.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(12-20-2012, 10:29 PM)MFSuper90 Where do you guys recommend buying parts from?Autohausaz.com buymbparts.biz or classic center.
I've bought from performanceparts before and their stuff is pretty good but expensive.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
12-22-2012, 12:14 PM
#9
(12-21-2012, 04:46 AM)winmutt(12-20-2012, 10:29 PM)MFSuper90 Where do you guys recommend buying parts from?Autohausaz.com buymbparts.biz or classic center.
I've bought from performanceparts before and their stuff is pretty good but expensive.
Thank ya Mr. winmutt
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
(12-21-2012, 04:46 AM)winmutt(12-20-2012, 10:29 PM)MFSuper90 Where do you guys recommend buying parts from?Autohausaz.com buymbparts.biz or classic center.
I've bought from performanceparts before and their stuff is pretty good but expensive.
Thank ya Mr. winmutt
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)