Driveshafts, custom and stock
Driveshafts, custom and stock
Powertrain Industries, Springfield MO branch
contact info-
PHONE: (417) 863-1830 FAX: (417) 863-0606
ADDRESS:
2114 East Rockhurst Street
Springfield, MO 65802
I have used them numerous times for both stock and custom driveshaft modifications. They have had no problems modifying and balancing MB two part driveshafts for me.
The jobs Ive had them do has gone from a simple balance, to a relengthening of the forward shaft, new center U-joint, overall balance, and they hit the driveshaft with a coat of spraypaint before they ship it it seems no matter the job.
Prices have been very reasonable. Mail service has been excellent.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
I recommend these guys-
Powertrain Industries, Springfield MO branch
contact info-
PHONE: (417) 863-1830 FAX: (417) 863-0606
ADDRESS:
2114 East Rockhurst Street
Springfield, MO 65802
I have used them numerous times for both stock and custom driveshaft modifications. They have had no problems modifying and balancing MB two part driveshafts for me.
The jobs Ive had them do has gone from a simple balance, to a relengthening of the forward shaft, new center U-joint, overall balance, and they hit the driveshaft with a coat of spraypaint before they ship it it seems no matter the job.
Prices have been very reasonable. Mail service has been excellent.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
South bay Driveline
1654 Almaden Rd.
San Jose, Ca. 96125
408-995-6000
www.sb-driveline.us
Had them shorten a 240 DL when doing the 4-spd swap and had the U-joint replaced.
later on I had them do the 240D U-joint, center Support Bearing and they also replaced the Bushings in the ends.
Think the price was $300, so should be good for another 300K miles.
They machine out the old MB joint and replace it with a greaseable one.
Charlie
I have used:
South bay Driveline
1654 Almaden Rd.
San Jose, Ca. 96125
408-995-6000
www.sb-driveline.us
Had them shorten a 240 DL when doing the 4-spd swap and had the U-joint replaced.
later on I had them do the 240D U-joint, center Support Bearing and they also replaced the Bushings in the ends.
Think the price was $300, so should be good for another 300K miles.
They machine out the old MB joint and replace it with a greaseable one.
Charlie
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
i also had a good experience with south bay driveline though my bill was a little more than charlie's, about $500.
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
South Bay Driveline did a custom propeller shaft for me and I couldn't be happier. Highly recommended. Especially if you are on the west coast.
3 Guest(s)
3 Guest(s)