WTB Mercedes OM617 to Jeep AX-15 kit
WTB Mercedes OM617 to Jeep AX-15 kit
I have a homemade 1/4" aluminum adapter plate I bought from a guy down in VA, comes with a Jeep flywheel drilled to the merc pattern.
I never installed it, he said that it ate a pilot bearing-which makes me think that you'd want to use a pilot bushing to align everything while you're assembling it.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-14-2013, 04:34 PM #2Yup. Looking for $150 + shipping.
I have a homemade 1/4" aluminum adapter plate I bought from a guy down in VA, comes with a Jeep flywheel drilled to the merc pattern.
I never installed it, he said that it ate a pilot bearing-which makes me think that you'd want to use a pilot bushing to align everything while you're assembling it.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
I'll get my brother to pull it out of storage and snap a photo though
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-15-2013, 08:38 AM #4Hell no!
I'll get my brother to pull it out of storage and snap a photo though
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-16-2013, 03:57 PM #7I'm houndin' him, I'll let you know first thing-I don't want to miss a sale
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-18-2013, 04:47 PM #9Supposedly getting photos in an hour or so we will see....
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
http://imageshack.us/a/img210/2746/ax151.jpg
http://imageshack.us/a/img221/6123/ax153.jpg
http://imageshack.us/a/img59/5629/ax152.jpg
http://imageshack.us/a/img195/231/ax154.jpg
He finnally came thru *nod to greazzer*
Looks like a little surface rust.
Full disclosure, I have never fitted this to an OM617 or an AX-15. I would HIGHLY recommend getting a pilot bushing or alignment tool (basically a steel pilot bushing) to make sure it all lines up straight.
You will still need to come up with fasteners and a pilot bushing that fits, but those are both easy to procure.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-18-2013, 05:50 PM #10http://imageshack.us/a/img547/3677/ax155.jpg
http://imageshack.us/a/img210/2746/ax151.jpg
http://imageshack.us/a/img221/6123/ax153.jpg
http://imageshack.us/a/img59/5629/ax152.jpg
http://imageshack.us/a/img195/231/ax154.jpg
He finnally came thru *nod to greazzer*
Looks like a little surface rust.
Full disclosure, I have never fitted this to an OM617 or an AX-15. I would HIGHLY recommend getting a pilot bushing or alignment tool (basically a steel pilot bushing) to make sure it all lines up straight.
You will still need to come up with fasteners and a pilot bushing that fits, but those are both easy to procure.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
hmmm its a little rougher than i was expecting, but looks like it will do the job. How about $150 shipped to zip code 95370? i found i can get a pilot bushing from a 73 cj-5, same exact size as the pilot bearing, just a bushing. thanks for the headsup on that! why didn't you end up using it?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-19-2013, 06:46 PM #12Sounds like a plan. PM me your address and we'll get the ball rolling.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-20-2013, 11:36 AM #13I never used it because my plan changed. A running DJ5 came by for $350, so I went that route. I'm now sitting on a DJ5, SM465, NP205, and mildly built 617.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
![[Image: Willys-DJ-5-Jeep-52.jpg]](http://blog.kaiserwillys.com/wp-content/uploads/2012/01/Willys-DJ-5-Jeep-52.jpg)
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-20-2013, 09:39 PM #15Mail jeeps. 2wd, I6, dynaglide, RHD. Had a hard top and sliding doors. Rear springs were on the outside of the frame rail stock. Funny front grill
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
9 Guest(s)
9 Guest(s)