Turbos. 20g, s366?, hx40, gt4082klnv
Turbos. 20g, s366?, hx40, gt4082klnv
Ill start small to big.
First is a mitsubishi turbo seems to be comparable to a 20g odd inlet flange and no down pipe flange but is in perfect working order and I believe a 20lb wg actuator with a very large wastegate. Water cooled too 200$ plus shipping
![[Image: 4D7F63D8-3193-4041-945C-54B75011E3F4-123...8822af.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/4D7F63D8-3193-4041-945C-54B75011E3F4-12393-00000DDA30CBE56F_zps4a8822af.jpg)
![[Image: FA6CA1ED-DA4A-4ACE-A858-E54DC3073B90-123...fd350e.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/FA6CA1ED-DA4A-4ACE-A858-E54DC3073B90-12393-00000DDA34CC3D86_zps63fd350e.jpg)
![[Image: 13BE8D10-98E8-46DE-8AE6-F7398CFD24C1-123...861119.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/13BE8D10-98E8-46DE-8AE6-F7398CFD24C1-12393-00000DDA38E71771_zps96861119.jpg)
![[Image: 8ABDF25E-0FB2-4A88-94E7-3A96D40965AA-123...0b08f9.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/8ABDF25E-0FB2-4A88-94E7-3A96D40965AA-12393-00000DDA3CFF3850_zps160b08f9.jpg)
Next is a turbo from a cat 3126e. Has 120k on it but one of the wastegate pucks broke off the pin. it can be welded back together with a nail or something. Its a twin scroll t3 similar to a s366 id say. 4'' compressor housing. 150$ + shipping
![[Image: 3A655FFB-57B1-4E96-8144-C5890FA9E41E-123...656ea7.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/3A655FFB-57B1-4E96-8144-C5890FA9E41E-12393-00000DDA402032DA_zps1a656ea7.jpg)
![[Image: BE3CC7EC-510E-4D7B-9111-37EEEB7DAEB9-123...3f2f3f.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/BE3CC7EC-510E-4D7B-9111-37EEEB7DAEB9-12393-00000DDA433716FC_zpscc3f2f3f.jpg)
![[Image: C87BB6F4-4A34-478B-B218-BDE46912862D-123...a9dc45.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/C87BB6F4-4A34-478B-B218-BDE46912862D-12393-00000DDA4B666E9F_zpse7a9dc45.jpg)
Next is a HX40 from a volvo diesel. Its a t3 twin scroll with i think the 12cm housing. It does have some compressor wheel damage though. 100$ shipping
![[Image: A6B632C3-43A3-4244-A1B1-E777E8F8935A-123...e8bf32.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/A6B632C3-43A3-4244-A1B1-E777E8F8935A-12393-00000DDA560E9D7B_zpsc1e8bf32.jpg)
![[Image: 0E43A631-197C-4E6B-B615-7C548874A3BB-123...b5f205.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/0E43A631-197C-4E6B-B615-7C548874A3BB-12393-00000DDA5D36A6A2_zps39b5f205.jpg)
![[Image: D37A2E9B-0240-4263-A532-375B95EB9E78-123...9b3713.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/D37A2E9B-0240-4263-A532-375B95EB9E78-12393-00000DDA60DB55E6_zps319b3713.jpg)
![[Image: C136745E-4F62-4010-8CDB-6F7EE9F2051F-123...d47e90.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/C136745E-4F62-4010-8CDB-6F7EE9F2051F-12393-00000DDA6400B867_zps14d47e90.jpg)
And lastly i have a gt4082klnv Its from a nissan diesel 7.2L vgt turbo. The vgt actuator went bad and they only sell it with the turbo. The turbo has 120k on it and the vgt lever moves freely and no play at all in the shaft. Odd inlet flange. This turbo is heavy and 200$+ shipping it can be yours.
![[Image: 2B651AD1-6585-4EDF-A237-73A14C384690-123...e84a55.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/2B651AD1-6585-4EDF-A237-73A14C384690-12393-00000DDA20888776_zps0be84a55.jpg)
![[Image: 0A852872-6D9B-4C02-B308-A9E780F8017D-123...f88696.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/0A852872-6D9B-4C02-B308-A9E780F8017D-12393-00000DDA29DBAB20_zps2cf88696.jpg)
![[Image: E024AC4C-F069-4631-9783-DCC3C74C1768-123...2b5275.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/E024AC4C-F069-4631-9783-DCC3C74C1768-12393-00000DDA26935EF4_zps872b5275.jpg)
![[Image: FA950167-2A1E-406E-9A90-4A77D89A7FBC-123...0ed961.jpg]](http://i1225.photobucket.com/albums/ee390/dieselboy73/FA950167-2A1E-406E-9A90-4A77D89A7FBC-12393-00000DDA2CFF6A75_zps8a0ed961.jpg)
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I need some money so im selling some of my turbo collection.
Ill start small to big.
First is a mitsubishi turbo seems to be comparable to a 20g odd inlet flange and no down pipe flange but is in perfect working order and I believe a 20lb wg actuator with a very large wastegate. Water cooled too 200$ plus shipping
Next is a turbo from a cat 3126e. Has 120k on it but one of the wastegate pucks broke off the pin. it can be welded back together with a nail or something. Its a twin scroll t3 similar to a s366 id say. 4'' compressor housing. 150$ + shipping
Next is a HX40 from a volvo diesel. Its a t3 twin scroll with i think the 12cm housing. It does have some compressor wheel damage though. 100$ shipping
And lastly i have a gt4082klnv Its from a nissan diesel 7.2L vgt turbo. The vgt actuator went bad and they only sell it with the turbo. The turbo has 120k on it and the vgt lever moves freely and no play at all in the shaft. Odd inlet flange. This turbo is heavy and 200$+ shipping it can be yours.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Interested of its within a certain range
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Could you measure the inducer of the compressor wheel from the vgt for me?
Interested of its within a certain range
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Google says .58ar 57mm compressor
Gt- series
40- turbine wheel dia <- doesn't sound right
82- compressor wheel dia <- maybe major overall dia?
K- electric actuator (bad)
L- water cooled center housing
N- ported compressor housing
V- multi vane variable geometry turbine
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Yeah I'll take the cover off and measure. It looks like 57-60mm just eyeballing it.
Google says .58ar 57mm compressor
Gt- series
40- turbine wheel dia <- doesn't sound right
82- compressor wheel dia <- maybe major overall dia?
K- electric actuator (bad)
L- water cooled center housing
N- ported compressor housing
V- multi vane variable geometry turbine
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Prices lowered.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
(04-08-2013, 12:35 AM)dieselboy Prices lowered.
Is the gt40 turbo still for sale? Can you ship it to Norway?
EDH_Performance
04-15-2013, 04:44 PM #5(04-08-2013, 12:35 AM)dieselboy Prices lowered.
Is the gt40 turbo still for sale? Can you ship it to Norway?
Oh 20G turbo sold.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Yes and yes. I sent a hy35 over there a few weeks ago and it cost 95$ for shipping. I'd estimate 130$ for this as its heavy.
Oh 20G turbo sold.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
EDH_Performance
04-16-2013, 04:12 AM #7I'll take it
Send me bank details and i wire you some monitas
6 Guest(s)
6 Guest(s)