OM606 value
OM606 value
04-05-2013, 08:26 AM
#5
(04-05-2013, 08:05 AM)Booster That sounds really expensive? Over here a e300td can be had for under £1000 with no damage?
Guess you guys don't have as many over there!
Yeah we're pretty backwards over here. A running small block v8 goes for less than a 606. When people think of diesels, they image brodozer trucks with giant stacks billowing clouds of smoke.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-05-2013, 08:26 AM #5(04-05-2013, 08:05 AM)Booster That sounds really expensive? Over here a e300td can be had for under £1000 with no damage?
Guess you guys don't have as many over there!
Yeah we're pretty backwards over here. A running small block v8 goes for less than a 606. When people think of diesels, they image brodozer trucks with giant stacks billowing clouds of smoke.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
04-05-2013, 10:10 AM
#6
(04-04-2013, 11:12 AM)Grecy Is that in Edmonton?
I have not seen it in person, but from the description it sounds pretty good.
I emailed the owner back and forward a few times, I think he wanted more than I offered for the engine.
-Dan
It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
(04-04-2013, 11:12 AM)Grecy Is that in Edmonton?
I have not seen it in person, but from the description it sounds pretty good.
I emailed the owner back and forward a few times, I think he wanted more than I offered for the engine.
-Dan
It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
04-05-2013, 10:21 AM
#7
For every 1 diesel Mercedes sold here something like 30-40 gas cars where sold.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-05-2013, 10:21 AM #7They are very rare in the U.S. not very many people bought diesel cars because of the expense. When a comparable gas Mercedes car cost 10k less like an e320
For every 1 diesel Mercedes sold here something like 30-40 gas cars where sold.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
04-05-2013, 12:10 PM
#8
(04-05-2013, 10:21 AM)willbhere4u They are very rare in the U.S. not very many people bought diesel cars because of the expense. When a comparable gas Mercedes car cost 10k less like an e320I wondered why they are so expensive across the pond!
For every 1 diesel Mercedes sold here something like 30-40 gas cars where sold.
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
04-05-2013, 12:10 PM #8(04-05-2013, 10:21 AM)willbhere4u They are very rare in the U.S. not very many people bought diesel cars because of the expense. When a comparable gas Mercedes car cost 10k less like an e320I wondered why they are so expensive across the pond!
For every 1 diesel Mercedes sold here something like 30-40 gas cars where sold.
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
04-08-2013, 08:23 AM
#10
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
Find a way to ship it cheap and the guys here will work with you
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-08-2013, 08:23 AM #10(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
Find a way to ship it cheap and the guys here will work with you
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
04-08-2013, 03:40 PM
#11
(04-05-2013, 10:10 AM)kmaser It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
I (somewhat cheekily) offered $1k for the engine alone.
He didn't reply to that.
-Dan
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
I you (or someone in the UK) wanted to offer a service where you buy used 606s and ship them to the US/Canada, I'll bet you could sell good ones for $2k all day long.
I'll go first in line
-Dan
This post was last modified: 04-08-2013, 03:41 PM by Grecy.
(04-05-2013, 10:10 AM)kmaser It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
I (somewhat cheekily) offered $1k for the engine alone.
He didn't reply to that.
-Dan
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
I you (or someone in the UK) wanted to offer a service where you buy used 606s and ship them to the US/Canada, I'll bet you could sell good ones for $2k all day long.
I'll go first in line
-Dan
04-09-2013, 08:14 AM
#12
(04-08-2013, 03:40 PM)Grecy(04-05-2013, 10:10 AM)kmaser It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
I (somewhat cheekily) offered $1k for the engine alone.
He didn't reply to that.
-Dan
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
I you (or someone in the UK) wanted to offer a service where you buy used 606s and ship them to the US/Canada, I'll bet you could sell good ones for $2k all day long.
I'll go first in line
-Dan
Pm me if your serious. I would more than happily sort you guys out with om606 engines and parts. A few things I would like from the US as well.
(04-08-2013, 03:40 PM)Grecy(04-05-2013, 10:10 AM)kmaser It's not but I have seen that one advertised as well, what did you end up offering him? He says he would part it out but sounded like he would rather not
I (somewhat cheekily) offered $1k for the engine alone.
He didn't reply to that.
-Dan
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
I you (or someone in the UK) wanted to offer a service where you buy used 606s and ship them to the US/Canada, I'll bet you could sell good ones for $2k all day long.
I'll go first in line
-Dan
Pm me if your serious. I would more than happily sort you guys out with om606 engines and parts. A few things I would like from the US as well.
04-09-2013, 09:43 AM
#13
I would be interested in an engine or 2 if we could get the $$$ right. Of course the biggest expense would be freight. The cheapest way would be to co-load a container. A good LCL company would be needed. Maybe ECU-LINE or CFR Freight to name some possibilities. Then of course would be what port to have them shipped to etc? I will be in Chattanooga, TN in a few months, I couldn't commit to anything until I'm there. I'm presently in South Africa for a few months. If you guys get serious and need some help with the shipping arrangements, let me know. My girlfriend has over a decade in Ocean freight.
04-09-2013, 09:01 PM
#14
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
There are a lot of Holset knock-offs from what I've heard and they're cheap. I can get a new HX40 pro for about $1,000 which is not cheap but it's new and genuine.
This post was last modified: 04-09-2013, 09:06 PM by Bangaway.
Well how much is a good 606.962 in the UK?
(04-08-2013, 07:54 AM)Booster Well I was looking on eBay USA for a holset hx40.... Seems to be loads about for sensible money. Just postage will be a killer? Shame I can't swap you guys some 606 parts for some turbos!!
There are a lot of Holset knock-offs from what I've heard and they're cheap. I can get a new HX40 pro for about $1,000 which is not cheap but it's new and genuine.
04-10-2013, 02:16 AM
#15
(04-09-2013, 09:01 PM)Bangaway Well how much is a good 606.962 in the UK?
I bought mine, heard it running and 115000mls, including 722.6 box and all accessories and fittings for £600 GBP.
I bought a 606.910 N/A for it's IP and including g/box and TC and got that for £400 GBP.
Two typical rusty British cars. They have a terrible reputation over here.
http://www.ebay.co.uk/itm/mercedes-e300t...t_75wt_954
http://www.ebay.co.uk/itm/1997-Mercedes-...1229wt_954
Quite decent later 320CDi engined W211 models are now going for £5000 or less. This is my daily driver, fabulous car, how i would love this engine for transplant, 500Nm torque in factory trim and it can be chipped to go much more. The electronics are way too complicated.
![[Image: P1050587.jpg]](http://i62.photobucket.com/albums/h112/a10ruk/P1050587.jpg)
![[Image: P1050590.jpg]](http://i62.photobucket.com/albums/h112/a10ruk/P1050590.jpg)
.
This post was last modified: 04-10-2013, 02:35 AM by Druk.
(04-09-2013, 09:01 PM)Bangaway Well how much is a good 606.962 in the UK?
I bought mine, heard it running and 115000mls, including 722.6 box and all accessories and fittings for £600 GBP.
I bought a 606.910 N/A for it's IP and including g/box and TC and got that for £400 GBP.
Two typical rusty British cars. They have a terrible reputation over here.
http://www.ebay.co.uk/itm/mercedes-e300t...t_75wt_954
http://www.ebay.co.uk/itm/1997-Mercedes-...1229wt_954
Quite decent later 320CDi engined W211 models are now going for £5000 or less. This is my daily driver, fabulous car, how i would love this engine for transplant, 500Nm torque in factory trim and it can be chipped to go much more. The electronics are way too complicated.
.
04-10-2013, 03:43 AM
#16
As far as I am concerned a good 606 can be had with pump and manifolds minus turbo for 500GBP £ the cheapest I could get shipping for was two engines on a 1x1x1m pallet near enough 400kgs was just under £1200
Is two 606 engines worth £2200?
If you had a container gearbox's etc could be sorted aswell. If that where done it would be cheaper to buy whole e300's and weigh the shell in after selling off other parts to keep costs down.
(04-09-2013, 09:43 AM)TurboWalt I would be interested in an engine or 2 if we could get the $$$ right. Of course the biggest expense would be freight. The cheapest way would be to co-load a container. A good LCL company would be needed. Maybe ECU-LINE or CFR Freight to name some possibilities. Then of course would be what port to have them shipped to etc? I will be in Chattanooga, TN in a few months, I couldn't commit to anything until I'm there. I'm presently in South Africa for a few months. If you guys get serious and need some help with the shipping arrangements, let me know. My girlfriend has over a decade in Ocean freight.
If you could give your opinion to how much a part or full container would set is back? Just a rough guess?
This post was last modified: 04-10-2013, 03:47 AM by Booster.
After having a look around at shipping prices I don't see it being worth while unless we could get 10 or so engines and parts in a part container.
As far as I am concerned a good 606 can be had with pump and manifolds minus turbo for 500GBP £ the cheapest I could get shipping for was two engines on a 1x1x1m pallet near enough 400kgs was just under £1200
Is two 606 engines worth £2200?
If you had a container gearbox's etc could be sorted aswell. If that where done it would be cheaper to buy whole e300's and weigh the shell in after selling off other parts to keep costs down.
(04-09-2013, 09:43 AM)TurboWalt I would be interested in an engine or 2 if we could get the $$$ right. Of course the biggest expense would be freight. The cheapest way would be to co-load a container. A good LCL company would be needed. Maybe ECU-LINE or CFR Freight to name some possibilities. Then of course would be what port to have them shipped to etc? I will be in Chattanooga, TN in a few months, I couldn't commit to anything until I'm there. I'm presently in South Africa for a few months. If you guys get serious and need some help with the shipping arrangements, let me know. My girlfriend has over a decade in Ocean freight.
If you could give your opinion to how much a part or full container would set is back? Just a rough guess?
04-10-2013, 04:14 AM
#18
I'm in the south of the uk so fairly close to a few ports, however I doubt it would cost that much to get the container to any port! Can't comment on where it would go to in the USA I would need someone to be a partner for the stuff that end.
This post was last modified: 04-10-2013, 04:16 AM by Booster.
Roughly each 606 is 180kg's I think. Can't be sure on this, all I know is we could fit a fair few 606 engines and box's into a 20ft container. 605's are even cheaper if that's an interest to anyone? How much is a good ls1 from the states?
I'm in the south of the uk so fairly close to a few ports, however I doubt it would cost that much to get the container to any port! Can't comment on where it would go to in the USA I would need someone to be a partner for the stuff that end.
Users browsing this thread:
12 Guest(s)
12 Guest(s)
Users browsing this thread:
12 Guest(s)
12 Guest(s)