STD Tuning Engine occasionally white smoke from exhaust

occasionally white smoke from exhaust

occasionally white smoke from exhaust

 
  • 0 Vote(s) - 0 Average
 
pico
Naturally-aspirated

3
04-16-2013, 02:51 PM #1
hi everyone,

we've been building an OM616 with a 603 pump with 7.5mm elements (built by pasi i think). standard turbo. alda is connected.

so far so good, engine runs great except for one thing:

after a few short sprints/accelerations on the road the engine suddenly starts to "misfire", power is gone, and big cloud of white smoke (from the smell of it it's pure unburnt diesel) comes from the exhaust together with a loud diesel ticking sound.

after maybe 5 seconds pushing the throttle the smoke is gone and the engine suddenly runs great again with full power.

does anyone know what the cause of this could be?
pico
04-16-2013, 02:51 PM #1

hi everyone,

we've been building an OM616 with a 603 pump with 7.5mm elements (built by pasi i think). standard turbo. alda is connected.

so far so good, engine runs great except for one thing:

after a few short sprints/accelerations on the road the engine suddenly starts to "misfire", power is gone, and big cloud of white smoke (from the smell of it it's pure unburnt diesel) comes from the exhaust together with a loud diesel ticking sound.

after maybe 5 seconds pushing the throttle the smoke is gone and the engine suddenly runs great again with full power.

does anyone know what the cause of this could be?

Duncansport
Holset

526
04-16-2013, 02:59 PM #2
(04-16-2013, 02:51 PM)pico hi everyone,

we've been building an OM616 with a 603 pump with 7.5mm elements (built by pasi i think). standard turbo. alda is connected.

so far so good, engine runs great except for one thing:

after a few short sprints/accelerations on the road the engine suddenly starts to "misfire", power is gone, and big cloud of white smoke (from the smell of it it's pure unburnt diesel) comes from the exhaust together with a loud diesel ticking sound.

after maybe 5 seconds pushing the throttle the smoke is gone and the engine suddenly runs great again with full power.

does anyone know what the cause of this could be?
Could be a fault with an injector (broken spring, ect) I would try to get it to skip then isolate what cylinder is the skip. Then swap the injector to rule that out, or if it follows that injector.
Wouldn't think it would be a fault with the pump as it sounds as though it is only effecting one cylinder.
Duncansport
04-16-2013, 02:59 PM #2

(04-16-2013, 02:51 PM)pico hi everyone,

we've been building an OM616 with a 603 pump with 7.5mm elements (built by pasi i think). standard turbo. alda is connected.

so far so good, engine runs great except for one thing:

after a few short sprints/accelerations on the road the engine suddenly starts to "misfire", power is gone, and big cloud of white smoke (from the smell of it it's pure unburnt diesel) comes from the exhaust together with a loud diesel ticking sound.

after maybe 5 seconds pushing the throttle the smoke is gone and the engine suddenly runs great again with full power.

does anyone know what the cause of this could be?
Could be a fault with an injector (broken spring, ect) I would try to get it to skip then isolate what cylinder is the skip. Then swap the injector to rule that out, or if it follows that injector.
Wouldn't think it would be a fault with the pump as it sounds as though it is only effecting one cylinder.

pico
Naturally-aspirated

3
04-16-2013, 03:07 PM #3
thanks for the quick reply. i'l put in set of injectors as i have 2 spare sets.
pico
04-16-2013, 03:07 PM #3

thanks for the quick reply. i'l put in set of injectors as i have 2 spare sets.

larsalan
Superturbo

1,272
04-16-2013, 03:31 PM #4
How does a 6cly pump fit on a 4cly motor?

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
04-16-2013, 03:31 PM #4

How does a 6cly pump fit on a 4cly motor?


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

willbhere4u
Six in a row make her go!

2,507
04-16-2013, 03:41 PM #5
I think he meant om606 6cylinder not the om616 240d 4cylinder
This post was last modified: 04-16-2013, 03:42 PM by willbhere4u.

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-16-2013, 03:41 PM #5

I think he meant om606 6cylinder not the om616 240d 4cylinder


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

larsalan
Superturbo

1,272
04-16-2013, 03:46 PM #6
Yes sir, that makes sense

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
04-16-2013, 03:46 PM #6

Yes sir, that makes sense


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

pico
Naturally-aspirated

3
04-16-2013, 04:22 PM #7
yes my mistake. it's a om606 engine.
pico
04-16-2013, 04:22 PM #7

yes my mistake. it's a om606 engine.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 7 Guest(s)
Users browsing this thread:
 7 Guest(s)