Looking for 7.5mm Elements
Looking for 7.5mm Elements
A website called DieselKontor from Germany sells 7mm elements but I don't know much about them, they might just be Edelbrock or Monark elements which don't really have a good profile for high performance from what I've read.
http://www.dieselkontor.de/index.php?cPath=58_183
I could be wrong but I don't think anyone in the tuning scene sells elements on their own anymore, I think they just rebuild the pump for you, I think there were counterfeit elements getting around.
A website called DieselKontor from Germany sells 7mm elements but I don't know much about them, they might just be Edelbrock or Monark elements which don't really have a good profile for high performance from what I've read.
http://www.dieselkontor.de/index.php?cPath=58_183
The 7mm elements are Bosch elements for the transit engine. Dont know the ins and outs but there have been a few comments that they arent the best, have a search and you will see them. Dont think you can buy 7.5mm elements and they aren't a DIY fit anyway unless you're a diesel pump mechanic of course with the kit to calibrate the pump again. PPD and Dieselmeken from here will supply and fit them for you.
(04-15-2013, 11:37 AM)Mark_M PPD and Dieselmeken from here will supply and fit them for you.I've been in contact with him about having a pump built but I hasn't replied in a while but he's in the middle of moving his shop, I might consider getting those 7mm elements for my spare 602 turbo pump just to get my 605 running, saves me having to cannibalise the 605's pump for its 6mm elements & I can just sell the 605 pump on intact & get some money back, possibly I could get almost as much back on the pump as I paid for the whole engine.
(04-15-2013, 11:37 AM)Mark_M PPD and Dieselmeken from here will supply and fit them for you.I've been in contact with him about having a pump built but I hasn't replied in a while but he's in the middle of moving his shop, I might consider getting those 7mm elements for my spare 602 turbo pump just to get my 605 running, saves me having to cannibalise the 605's pump for its 6mm elements & I can just sell the 605 pump on intact & get some money back, possibly I could get almost as much back on the pump as I paid for the whole engine.
I take it you have a friendly pump guy who can fit these properly?
Yes he doesn't do that anymore, he sells them through PPD now I think. Nobody wants their custom elements being put into a half assed pump setup and then complaining so they are supply and fit only. Biggest you will get off the shelf are the ones linked to above.
I take it you have a friendly pump guy who can fit these properly?
3 Guest(s)
3 Guest(s)