BOW
BOW
04-17-2013, 02:08 PM
#3
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-17-2013, 02:08 PM #3blow off valve?
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
04-17-2013, 04:42 PM
#5
They are necessary in gas engines to blow off boost after you let out on the throttle.
Diesels have no need to blow off boost.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Yeah, I think he means BOV.
They are necessary in gas engines to blow off boost after you let out on the throttle.
Diesels have no need to blow off boost.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
04-18-2013, 07:29 AM
#7
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Although some people do put them on diesels to keep their oversized chargers from surgeing when they let out on the throttle
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
04-18-2013, 08:15 AM
#8
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-18-2013, 08:15 AM #8An open-air wastegate would be just as fun to listen to though
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
04-18-2013, 09:44 AM
#9
But it would sound cool you would just need to find a throttle actuated vacuum switch. My old 1980 300sd had a vacuum switch that controlled vacuum to the transmission. IE full vacuum with no throttle and 0 vacuum at full throttle. On that car it was on top of the injection pump and hooked in to the linkage. It basically made vacuum act like it would on a gas engine with an open or closed throttle plate being that the diesel has a vacuum pump that is constant.
This post was last modified: 04-18-2013, 09:49 AM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-18-2013, 09:44 AM #9It probably wouldn't do much performance wise.
But it would sound cool you would just need to find a throttle actuated vacuum switch. My old 1980 300sd had a vacuum switch that controlled vacuum to the transmission. IE full vacuum with no throttle and 0 vacuum at full throttle. On that car it was on top of the injection pump and hooked in to the linkage. It basically made vacuum act like it would on a gas engine with an open or closed throttle plate being that the diesel has a vacuum pump that is constant.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
04-19-2013, 09:13 AM
#10
(04-18-2013, 09:44 AM)willbhere4u It probably wouldn't do much performance wise.
But it would sound cool you would just need to find a throttle actuated vacuum switch. My old 1980 300sd had a vacuum switch that controlled vacuum to the transmission. IE full vacuum with no throttle and 0 vacuum at full throttle. On that car it was on top of the injection pump and hooked in to the linkage. It basically made vacuum act like it would on a gas engine with an open or closed throttle plate being that the diesel has a vacuum pump that is constant.
Wouldn't do anything performance wise besides save your turbo if your having severe bark or surge issues when you let out on the throttle.
They do sound cool though
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
(04-18-2013, 09:44 AM)willbhere4u It probably wouldn't do much performance wise.
But it would sound cool you would just need to find a throttle actuated vacuum switch. My old 1980 300sd had a vacuum switch that controlled vacuum to the transmission. IE full vacuum with no throttle and 0 vacuum at full throttle. On that car it was on top of the injection pump and hooked in to the linkage. It basically made vacuum act like it would on a gas engine with an open or closed throttle plate being that the diesel has a vacuum pump that is constant.
Wouldn't do anything performance wise besides save your turbo if your having severe bark or surge issues when you let out on the throttle.
They do sound cool though
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
04-19-2013, 10:36 AM
#11
I could see it being very useful if you where using compound turbos or supercharger turbo set up
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-19-2013, 10:36 AM #11It still should not be nearly as bad as a gas car since there is no throttle plate getting slammed closed. unless the engine can loose all of its rpm very very quickly. It should just gently slow down as the rpm lowers as it looses back pressure from the exhaust.
I could see it being very useful if you where using compound turbos or supercharger turbo set up
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
04-20-2013, 12:01 PM
#12
(04-19-2013, 10:36 AM)willbhere4u It still should not be nearly as bad as a gas car since there is no throttle plate getting slammed closed. unless the engine can loose all of its rpm very very quickly. It should just gently slow down as the rpm lowers as it looses back pressure from the exhaust.
I could see it being very useful if you where using compound turbos or supercharger turbo set up
IT'S USELESS cause youre loosing boost but the point to build it
on/off
cause i love the sound of BOV )))
(04-19-2013, 10:36 AM)willbhere4u It still should not be nearly as bad as a gas car since there is no throttle plate getting slammed closed. unless the engine can loose all of its rpm very very quickly. It should just gently slow down as the rpm lowers as it looses back pressure from the exhaust.
I could see it being very useful if you where using compound turbos or supercharger turbo set up
IT'S USELESS cause youre loosing boost but the point to build it
on/off
cause i love the sound of BOV )))
04-21-2013, 08:53 AM
#13
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
My buddies 5.9 cummins needs a BOV. His 66mm charger surges like CRAZY when he lets off the throttle. Slow or fast.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Users browsing this thread:
8 Guest(s)
8 Guest(s)
Users browsing this thread:
8 Guest(s)
8 Guest(s)