w201 om606 blacksmoker
w201 om606 blacksmoker
05-02-2013, 10:46 AM
#2
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-02-2013, 10:46 AM #2What engine are you putting in there?
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
05-02-2013, 11:04 AM
#4
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-02-2013, 11:04 AM #4That should be a rocket when your done! Make sure you take pictures of your progress
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
05-02-2013, 11:53 AM
#6
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-02-2013, 11:53 AM #6That just depends on how much you turn the steering wheel lol!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
i have too a white 190 with 3.0diesel 
Duncansport
05-09-2013, 10:13 AM #15Looks good. Someone who's artistic needs to make us a STD OM606 graphic...
05-09-2013, 11:34 AM
#18
(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
05-09-2013, 11:44 AM
#19
(05-09-2013, 11:34 AM)ravenxm(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
Sure, i'll get them tonight. They were from a UK spec w210. Was your 606 from a w210 also?
My w201 had an m102 engine, 2.0 4cyl, what does yours have?
(05-09-2013, 11:34 AM)ravenxm(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
Sure, i'll get them tonight. They were from a UK spec w210. Was your 606 from a w210 also?
My w201 had an m102 engine, 2.0 4cyl, what does yours have?
05-09-2013, 11:51 AM
#20
(05-09-2013, 11:44 AM)HughF_UK2.3 8v layzi gator)))))(05-09-2013, 11:34 AM)ravenxm(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
Sure, i'll get them tonight. They were from a UK spec w210. Was your 606 from a w210 also?
My w201 had an m102 engine, 2.0 4cyl, what does yours have?
(05-09-2013, 11:44 AM)HughF_UK2.3 8v layzi gator)))))(05-09-2013, 11:34 AM)ravenxm(05-09-2013, 11:28 AM)HughF_UK Raven,bug him and his compliments
Following on from the PM, I can only assume that you have different engine arms to me, I have no issues with the sump pan.
And I think Duncansport was dropping you a compliment
Hugh
can u drop me youre arms PN?>>???maybe before i use ford siera mountings)))i can find them
Sure, i'll get them tonight. They were from a UK spec w210. Was your 606 from a w210 also?
My w201 had an m102 engine, 2.0 4cyl, what does yours have?
05-10-2013, 12:16 PM
#22
(05-09-2013, 10:23 AM)ravenxmHahaha, i was saying that a person on this forum should design a nice looking OM606/SuperTurboDiesel sticker.....I.E. graphic for those of us who may want to promote this forum. Nothing negative about your project or how your doing it, it looks fine.(05-09-2013, 10:13 AM)Duncansport Looks good. Someone who's artistic needs to make us a STD OM606 graphic...u dont like it? leave it
it"s my project here i will put any pictures i like and feel nececary to put
so once again
piss off
Duncansport
05-10-2013, 12:16 PM #22(05-09-2013, 10:23 AM)ravenxmHahaha, i was saying that a person on this forum should design a nice looking OM606/SuperTurboDiesel sticker.....I.E. graphic for those of us who may want to promote this forum. Nothing negative about your project or how your doing it, it looks fine.(05-09-2013, 10:13 AM)Duncansport Looks good. Someone who's artistic needs to make us a STD OM606 graphic...u dont like it? leave it
it"s my project here i will put any pictures i like and feel nececary to put
so once again
piss off
05-10-2013, 04:00 PM
#23
(05-10-2013, 10:44 AM)ravenxm and to cut the oil pan
Did you make a new oil pan?
Do you think it has the same total volume of oil?
How about the oil pickup?
I'm looking into oil pan mods as I think the 606 oil pan will hit the front axle for the swap I'm looking at
Thanks!
-Dan
05-10-2013, 11:32 PM
#24
now,i,have 500 gramm less,oil ....i had the same problem with front swaybar so i took him down i"ll install a custommade later
(05-10-2013, 12:16 PM)Duncansport(05-09-2013, 10:23 AM)ravenxmHahaha, i was saying that a person on this forum should design a nice looking OM606/SuperTurboDiesel sticker.....I.E. graphic for those of us who may want to promote this forum. Nothing negative about your project or how your doing it, it looks fine.(05-09-2013, 10:13 AM)Duncansport Looks good. Someone who's artistic needs to make us a STD OM606 graphic...u dont like it? leave it
it"s my project here i will put any pictures i like and feel nececary to put
so once again
piss off
sorrrrrrry for missunderstood) i was to agressive
my fault
i also dream about sticker
"powered by STD"
This post was last modified: 05-11-2013, 12:06 AM by ravenxm.
Not a,new one ..
now,i,have 500 gramm less,oil ....i had the same problem with front swaybar so i took him down i"ll install a custommade later
(05-10-2013, 12:16 PM)Duncansport(05-09-2013, 10:23 AM)ravenxmHahaha, i was saying that a person on this forum should design a nice looking OM606/SuperTurboDiesel sticker.....I.E. graphic for those of us who may want to promote this forum. Nothing negative about your project or how your doing it, it looks fine.(05-09-2013, 10:13 AM)Duncansport Looks good. Someone who's artistic needs to make us a STD OM606 graphic...u dont like it? leave it
it"s my project here i will put any pictures i like and feel nececary to put
so once again
piss off
sorrrrrrry for missunderstood) i was to agressive
my fault
i also dream about sticker
"powered by STD"
05-11-2013, 03:01 AM
#25
here is myne
http://www.per4m.lt/forum/download/file.php?id=3372
why you dont use w124 3.0diesel engine mountings ? and oil panel ?
here is myne
http://www.per4m.lt/forum/download/file.php?id=3372
05-22-2013, 02:51 PM
#28
That thing will be a rocket with a new pump and big turbo
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
07-19-2013, 01:16 PM
#33
http://www.youtube.com/watch?v=cUGf01Z4FV0
starrrrrrtttt
How cc have your pump?
11-14-2013, 07:24 AM
#36
https://www.youtube.com/watch?v=RP1aeMvCcDg
here iis my first race)))
https://www.youtube.com/watch?v=cD9_G2mV24U
only 1bar boost)
1 up 1to go))
this is first runout )injection retarded but what a sound
https://www.youtube.com/watch?v=RP1aeMvCcDg
here iis my first race)))
https://www.youtube.com/watch?v=cD9_G2mV24U
only 1bar boost)
1 up 1to go))
11-14-2013, 06:53 PM
#38
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
1.5 bars for a gas suburu is a lot! That would put it at around 350hp with the right tuning
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Users browsing this thread:
9 Guest(s)
9 Guest(s)
Users browsing this thread:
9 Guest(s)
9 Guest(s)