urgent turbo question
urgent turbo question
05-08-2013, 08:48 AM
#1
dear frends now i"m going to hungary and i have optiion to bye for a good price one of these turbos
garrett GTX3076r
garrett GT3582R - 714568-10
GT3582R - 714568-8
or to search fot HX35>>???
who can help me with it>>>???
BUILD is OM606 with 7.5mm elements
+-350WHP wanted
This post was last modified: 05-15-2013, 09:58 AM by ravenxm.
Post: #3RE: turbo question
dear frends now i"m going to hungary and i have optiion to bye for a good price one of these turbos
garrett GTX3076r
garrett GT3582R - 714568-10
GT3582R - 714568-8
or to search fot HX35>>???
who can help me with it>>>???
BUILD is OM606 with 7.5mm elements
+-350WHP wanted
05-08-2013, 02:05 PM
#2
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Do you have measurements of the intake and exhaust wheel? thatd be more helpful than AR ratios
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
05-15-2013, 09:33 PM
#4
The gt3582 are close in comparison to a HX40. 61mm inducer
If you have a good price on that GTX, I would get it, those are really nice chargers.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
The gtx3076R would be a little bigger, and actually better than a hx35 because the GTX is ball bearing.
The gt3582 are close in comparison to a HX40. 61mm inducer
If you have a good price on that GTX, I would get it, those are really nice chargers.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
05-16-2013, 12:38 AM
#6
(05-15-2013, 09:33 PM)MFSuper90 The gtx3076R would be a little bigger, and actually better than a hx35 because the GTX is ball bearing.
The gt3582 are close in comparison to a HX40. 61mm inducer
If you have a good price on that GTX, I would get it, those are really nice chargers.
They dynoed 600hp with Garret gt3582 and 180cc in a om606
EDH_Performance
05-16-2013, 12:38 AM #6(05-15-2013, 09:33 PM)MFSuper90 The gtx3076R would be a little bigger, and actually better than a hx35 because the GTX is ball bearing.
The gt3582 are close in comparison to a HX40. 61mm inducer
If you have a good price on that GTX, I would get it, those are really nice chargers.
They dynoed 600hp with Garret gt3582 and 180cc in a om606
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Users browsing this thread:
4 Guest(s)
4 Guest(s)