STD Tuning Engine Welding Om617 Exhaust manifold.

Welding Om617 Exhaust manifold.

Welding Om617 Exhaust manifold.

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
stomis
Find
K26-2

31
06-02-2013, 07:10 PM #1
Reply
Reply
Was wondering if the om617 exhaust manifold was cast iron or cast steel. Im figuring its cast iron. I used ni-rod when I welded my EGR shut just to be safe and am considering welding a port straight to the manifold for my external wastegate but would prefer to MIG it if possible as Im not really an avid stick welder.
1986 Olds 442 - Blue/Silver : 383 SBC, AFR 210 Eliminators, Roller Cam, Blueprinted and balance (for real Smile

To come: Gen 1 Isuzu trooper, OM617, sm465, np241, locked toy axles, 33x10.5 KM2s
stomis
06-02-2013, 07:10 PM #1

Was wondering if the om617 exhaust manifold was cast iron or cast steel. Im figuring its cast iron. I used ni-rod when I welded my EGR shut just to be safe and am considering welding a port straight to the manifold for my external wastegate but would prefer to MIG it if possible as Im not really an avid stick welder.

1986 Olds 442 - Blue/Silver : 383 SBC, AFR 210 Eliminators, Roller Cam, Blueprinted and balance (for real Smile

To come: Gen 1 Isuzu trooper, OM617, sm465, np241, locked toy axles, 33x10.5 KM2s

Reply
Reply
ronnie
Find
GT2559V

179
06-02-2013, 08:18 PM #2
Reply
Reply
I mig welded mine without any problems
ronnie
06-02-2013, 08:18 PM #2

I mig welded mine without any problems

Reply
Reply
MFSuper90
Find
Budget Builder

1,533
06-02-2013, 09:05 PM #3
Reply
Reply
I have mig welded cast with pretty good success also
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
06-02-2013, 09:05 PM #3

I have mig welded cast with pretty good success also

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Reply
Reply
Simpler=Better
Find
PORTED HEAD

2,127
06-02-2013, 10:07 PM #4
Reply
Reply
preheat, clean the surface, and let it cool over a few hours. I've only done mild cast welding though, haven't hacked up my exhaust yet
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
06-02-2013, 10:07 PM #4

preheat, clean the surface, and let it cool over a few hours. I've only done mild cast welding though, haven't hacked up my exhaust yet

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Reply
Reply
poleshady
Find
GTA2056V

78
06-03-2013, 05:25 AM #5
Reply
Reply
pre heating definitely helped with the exhaust manifold penetration, but in only have 120v mig welder.
poleshady
06-03-2013, 05:25 AM #5

pre heating definitely helped with the exhaust manifold penetration, but in only have 120v mig welder.

Reply
Reply
yankneck696
Find
Build it so strong & blow it up good !!!

395
06-03-2013, 06:51 AM #6
Reply
Reply
Preheat & use stainless wire, then wrap it in a welding blanket.

Ed
yankneck696
06-03-2013, 06:51 AM #6

Preheat & use stainless wire, then wrap it in a welding blanket.

Ed

Reply
Reply
stomis
Find
K26-2

31
06-03-2013, 05:51 PM #7
Reply
Reply
If its cast iron Ill just do it the right way and preheat and bone up on my stick welding skills and break out the ni-rod.

Thanks guys.
1986 Olds 442 - Blue/Silver : 383 SBC, AFR 210 Eliminators, Roller Cam, Blueprinted and balance (for real Smile

To come: Gen 1 Isuzu trooper, OM617, sm465, np241, locked toy axles, 33x10.5 KM2s
stomis
06-03-2013, 05:51 PM #7

If its cast iron Ill just do it the right way and preheat and bone up on my stick welding skills and break out the ni-rod.

Thanks guys.

1986 Olds 442 - Blue/Silver : 383 SBC, AFR 210 Eliminators, Roller Cam, Blueprinted and balance (for real Smile

To come: Gen 1 Isuzu trooper, OM617, sm465, np241, locked toy axles, 33x10.5 KM2s

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)