Mustangs...
Mustangs...
07-14-2013, 10:21 PM
#1
Needless to stay, I've been here one day and if I see another throttle jockey in a mustang I feel like I might come unglued haha
End rant
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
I am at myrtle beach this week with a friend for vacation, and it is mustang week.
Needless to stay, I've been here one day and if I see another throttle jockey in a mustang I feel like I might come unglued haha
End rant
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
07-14-2013, 11:24 PM
#2
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-14-2013, 11:24 PM #2Yeah, don't really know anybody who actually likes Mustangs
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
07-15-2013, 08:06 AM
#3
(07-14-2013, 11:24 PM)sassparilla_kid Yeah, don't really know anybody who actually likes Mustangs
I love my 1970. As a wedding present my Dad/ Brother got the engine rebuilt for me by our local old timer shop (saving me like a winter of farting around in the shed). I love the styling, the ride, and the pushrod rumble, and the power on demand. Even when it was running with (1 or more) spun cam bearings and misfires that thing was a beast!
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-15-2013, 08:06 AM #3(07-14-2013, 11:24 PM)sassparilla_kid Yeah, don't really know anybody who actually likes Mustangs
I love my 1970. As a wedding present my Dad/ Brother got the engine rebuilt for me by our local old timer shop (saving me like a winter of farting around in the shed). I love the styling, the ride, and the pushrod rumble, and the power on demand. Even when it was running with (1 or more) spun cam bearings and misfires that thing was a beast!
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-15-2013, 08:12 AM
#4
No old stangs to be found yet.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
All I have seen is new mustangs, couple GT's and a couple wanna be cobras (v6's with switched badges)
No old stangs to be found yet.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
07-15-2013, 08:47 AM
#5
(07-15-2013, 08:12 AM)MFSuper90 All I have seen is new mustangs, couple GT's and a couple wanna be cobras (v6's with switched badges)
No old stangs to be found yet.
The new ones are fast & fun (The outlaws have one) but yeah I hear you. I bet all of those v6s are NA with stock cams and a glasspack.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-15-2013, 08:47 AM #5(07-15-2013, 08:12 AM)MFSuper90 All I have seen is new mustangs, couple GT's and a couple wanna be cobras (v6's with switched badges)
No old stangs to be found yet.
The new ones are fast & fun (The outlaws have one) but yeah I hear you. I bet all of those v6s are NA with stock cams and a glasspack.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-15-2013, 08:57 AM
#6
(07-14-2013, 10:21 PM)MFSuper90 I am at myrtle beach this week with a friend for vacation, and it is mustang week.
Needless to stay, I've been here one day and if I see another throttle jockey in a mustang I feel like I might come unglued haha
End rant
this is why you have a built in smoke generator in your car.
They rev and all you get is noise, you rev and its a sensory experience impacting vision, hearing, scent, and taste.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(07-14-2013, 10:21 PM)MFSuper90 I am at myrtle beach this week with a friend for vacation, and it is mustang week.
Needless to stay, I've been here one day and if I see another throttle jockey in a mustang I feel like I might come unglued haha
End rant
this is why you have a built in smoke generator in your car.
They rev and all you get is noise, you rev and its a sensory experience impacting vision, hearing, scent, and taste.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
07-15-2013, 10:19 PM
#7
.
Gota love Mercedes Diesels!
.
DeliveryValve
07-15-2013, 10:19 PM #7I have to admit, I am a big Mustang fan. I dig them all, even the awful Mustang II!!
.
Gota love Mercedes Diesels!
.
07-16-2013, 08:21 AM
#8
(07-15-2013, 10:19 PM)DeliveryValve I have to admit, I am a big Mustang fan. I dig them all, even the awful Mustang II!!
So long as you refer to the fox body as a taurus, we're good
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-16-2013, 08:21 AM #8(07-15-2013, 10:19 PM)DeliveryValve I have to admit, I am a big Mustang fan. I dig them all, even the awful Mustang II!!
So long as you refer to the fox body as a taurus, we're good
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-16-2013, 01:19 PM
#9
I was hoping for several 1000hp stangs! Nope...
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Went to the mustang show today, simply for something to do. And I wasn't really impressed. There was at least 400 mustangs, and not one that just blew my mind. Most we're your run of the mill GT's, lots of supercharged ones, I saw one gt500 super snake. Two were turbocharged, which intrigued me more than anything else. One running parrallel twins and the other running a single. Both had relatively small chargers and I'd guess would be a little over 600hp.
I was hoping for several 1000hp stangs! Nope...
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
07-16-2013, 08:11 PM
#10
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Seem to be girl cars here in the Panhandle of Texas. Alllll chicks driving those things.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
07-17-2013, 01:38 AM
#11
(07-16-2013, 08:11 PM)w123love Seem to be girl cars here in the Panhandle of Texas. Alllll chicks driving those things.
All chicks and bros around here driving them
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-17-2013, 01:38 AM #11(07-16-2013, 08:11 PM)w123love Seem to be girl cars here in the Panhandle of Texas. Alllll chicks driving those things.
All chicks and bros around here driving them
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
07-17-2013, 08:51 AM
#12
The engine bay needs to be blasted & repainted (original green, rattled red by PO, rattled black by 17yr old me)
The transmission needs work (winds up and slams into second)
The motor needs to go back in :p
Needs a real carb, not the junkyard special I was running way back when
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-17-2013, 08:51 AM #12Yeah nobody's driving mine:
The engine bay needs to be blasted & repainted (original green, rattled red by PO, rattled black by 17yr old me)
The transmission needs work (winds up and slams into second)
The motor needs to go back in :p
Needs a real carb, not the junkyard special I was running way back when
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-17-2013, 08:55 AM
#13
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-17-2013, 08:55 AM #13You mean TBI or multi port and not carb right? lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
07-17-2013, 09:06 AM
#14
raysorenson
07-17-2013, 09:06 AM #14The new 5.0l GT's have an impressive motor. Even the 3.7l V6 is stronger than a lot of past Cobra models and probably the most trackworthy setup in the Mustang line.
07-17-2013, 10:03 AM
#15
(07-17-2013, 08:55 AM)sassparilla_kid You mean TBI or multi port and not carb right? lol
Other than the engine bay mishaps this car is really unmolested, and has no serious rust. I want to keep it as stock as possible (hence the 3 speed auto, and the stock rebuild). It should be a fun car to cruise around in and make some noise if I want to. I like ethanol in modern regularly driven cars, but this baby will only be seeing straight gas & stabil.
I WILL be adding AC though, and a simple but nice stereo in the glove box leaving the dead AM radio in the dash for looks.
This post was last modified: 07-17-2013, 10:11 AM by Simpler=Better.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-17-2013, 10:03 AM #15(07-17-2013, 08:55 AM)sassparilla_kid You mean TBI or multi port and not carb right? lol
Other than the engine bay mishaps this car is really unmolested, and has no serious rust. I want to keep it as stock as possible (hence the 3 speed auto, and the stock rebuild). It should be a fun car to cruise around in and make some noise if I want to. I like ethanol in modern regularly driven cars, but this baby will only be seeing straight gas & stabil.
I WILL be adding AC though, and a simple but nice stereo in the glove box leaving the dead AM radio in the dash for looks.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Users browsing this thread:
12 Guest(s)
12 Guest(s)
Users browsing this thread:
12 Guest(s)
12 Guest(s)