STD Other FS / WTB / Buying guides w123 parts - TD swaybar/2.88 diff/skidplate and more

w123 parts - TD swaybar/2.88 diff/skidplate and more

w123 parts - TD swaybar/2.88 diff/skidplate and more

 
  • 0 Vote(s) - 0 Average
 
capflya
Dreaming of a VNT

309
06-20-2013, 10:09 AM #1
Posted this on the fruity forums but figured I would post here as well. I got a deal on a w124 300D Turbo so I'll be selling my w123. I don't think my parts would add value to the car so I'm going to sell some spare parts as well as some of the mods I've done to the W123.

I need to go through everything to see what all needs to go up for sale so I will add to this post when I find more parts. For now I figured I would list some of the items I know are up for grabs.

I am looking for some Euro W124 lights or possibly just the newer w124 headlights (94/95 years with the full glass light). May be open for other trades so feel free to make me an offer. All prices are OBO + shipping or local pick up. I'm in the SF Bay area, I will be down in socal the 2nd week of July so I could bring parts with me in my truck if you're down that direction.

The lights are still on my car. If you want a picture of something let me know and I'll email it to you.

The List:

Bosch Euro headlights - $140 for the pair
Not exactly matching but good lights. One is vacuum adjust the other is not. Drivers side lens is good but pass side could use a polish or replacement ($45-50 last time I checked). I would have to go look but I think one of them is missing one mounting tab so there are only three screws to hold it in place. Still mounts securely to the car but figured it was worth mentioning

- I have an H4 Hi/Lo HID kit that I fitted to the euro lights. If you want that to I will include that for an additional $50.

w123 Wagon sway bar - $100

722.3 trans from '83 300D with Torque converter - $100
(unknown miles, was in car when I got it. Swapped in engine/trans combo from 85 car as one unit so I just pulled this one out. I drove the car with this trans before pulling it so it was working at that time.

2.88 Differential and matching speedometer - $200
Diff has 135k miles on it.

QTY 2 - Axles with good boots - $90/pair or $50/each
135k miles or less. They looked newer than the rest of the bottom of the car so they may have been replaced. Car had 135k miles so at most that is the amount of miles these have.

w123 skidplate and mounting hardware - $90

More to come...
This post was last modified: 06-26-2013, 08:24 AM by capflya.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
06-20-2013, 10:09 AM #1

Posted this on the fruity forums but figured I would post here as well. I got a deal on a w124 300D Turbo so I'll be selling my w123. I don't think my parts would add value to the car so I'm going to sell some spare parts as well as some of the mods I've done to the W123.

I need to go through everything to see what all needs to go up for sale so I will add to this post when I find more parts. For now I figured I would list some of the items I know are up for grabs.

I am looking for some Euro W124 lights or possibly just the newer w124 headlights (94/95 years with the full glass light). May be open for other trades so feel free to make me an offer. All prices are OBO + shipping or local pick up. I'm in the SF Bay area, I will be down in socal the 2nd week of July so I could bring parts with me in my truck if you're down that direction.

The lights are still on my car. If you want a picture of something let me know and I'll email it to you.

The List:

Bosch Euro headlights - $140 for the pair
Not exactly matching but good lights. One is vacuum adjust the other is not. Drivers side lens is good but pass side could use a polish or replacement ($45-50 last time I checked). I would have to go look but I think one of them is missing one mounting tab so there are only three screws to hold it in place. Still mounts securely to the car but figured it was worth mentioning

- I have an H4 Hi/Lo HID kit that I fitted to the euro lights. If you want that to I will include that for an additional $50.

w123 Wagon sway bar - $100

722.3 trans from '83 300D with Torque converter - $100
(unknown miles, was in car when I got it. Swapped in engine/trans combo from 85 car as one unit so I just pulled this one out. I drove the car with this trans before pulling it so it was working at that time.

2.88 Differential and matching speedometer - $200
Diff has 135k miles on it.

QTY 2 - Axles with good boots - $90/pair or $50/each
135k miles or less. They looked newer than the rest of the bottom of the car so they may have been replaced. Car had 135k miles so at most that is the amount of miles these have.

w123 skidplate and mounting hardware - $90

More to come...




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

Greazzer
Superturbo

1,278
06-20-2013, 04:22 PM #2
Hey,

Any snappies for the skidpate ? If so, PM them to me or email them to me.

Thanks !

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
06-20-2013, 04:22 PM #2

Hey,

Any snappies for the skidpate ? If so, PM them to me or email them to me.

Thanks !


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

capflya
Dreaming of a VNT

309
06-20-2013, 04:28 PM #3
I'll have to go dive under the car after I get off work... it's the one-piece that covers the engine oil pan only. It had a couple scratches on it but that is what it's there for right? I'll email you a couple pics after work. If you have some monark nozzles for an OM603 we could maybe work out a trade?



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
06-20-2013, 04:28 PM #3

I'll have to go dive under the car after I get off work... it's the one-piece that covers the engine oil pan only. It had a couple scratches on it but that is what it's there for right? I'll email you a couple pics after work. If you have some monark nozzles for an OM603 we could maybe work out a trade?




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

Greazzer
Superturbo

1,278
06-20-2013, 05:59 PM #4
Trades ... sure ! I could swap the complete service for a set of 6 which is over $100 and just call it even? no killer rush on the pictures...by the end of the weekend is fine and super fast in my book. Thanks again !

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
06-20-2013, 05:59 PM #4

Trades ... sure ! I could swap the complete service for a set of 6 which is over $100 and just call it even? no killer rush on the pictures...by the end of the weekend is fine and super fast in my book. Thanks again !


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Hotrodbenz
Boost and roost baby let's do some coke

46
06-22-2013, 09:52 PM #5
would you take less for the 2.88 diff?
Hotrodbenz
06-22-2013, 09:52 PM #5

would you take less for the 2.88 diff?

capflya
Dreaming of a VNT

309
06-22-2013, 10:16 PM #6
(06-22-2013, 09:52 PM)Hotrodbenz would you take less for the 2.88 diff?

Sending you a PM.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
06-22-2013, 10:16 PM #6

(06-22-2013, 09:52 PM)Hotrodbenz would you take less for the 2.88 diff?

Sending you a PM.




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

capflya
Dreaming of a VNT

309
06-26-2013, 08:28 AM #7
Lowered some prices, somebody needs these 123 parts right? Big Grin



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
06-26-2013, 08:28 AM #7

Lowered some prices, somebody needs these 123 parts right? Big Grin




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

capflya
Dreaming of a VNT

309
07-16-2013, 11:33 PM #8
Sale pending on the 2.88 diff/speedometer



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
07-16-2013, 11:33 PM #8

Sale pending on the 2.88 diff/speedometer




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

sassparilla_kid
diesel > all other fuels

1,618
07-17-2013, 08:53 AM #9
I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-17-2013, 08:53 AM #9

I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

capflya
Dreaming of a VNT

309
07-17-2013, 09:11 AM #10
(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
07-17-2013, 09:11 AM #10

(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

sassparilla_kid
diesel > all other fuels

1,618
07-19-2013, 09:15 AM #11
(07-17-2013, 09:11 AM)capflya
(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.

It doesn't matter to me, I'll try to get some pictures in the next couple days though

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-19-2013, 09:15 AM #11

(07-17-2013, 09:11 AM)capflya
(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.

It doesn't matter to me, I'll try to get some pictures in the next couple days though


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

MFSuper90
Budget Builder

1,533
07-19-2013, 07:21 PM #12
Why can't you be closer!Sad
I'd love to have a 2.88 diff

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
07-19-2013, 07:21 PM #12

Why can't you be closer!Sad
I'd love to have a 2.88 diff


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

capflya
Dreaming of a VNT

309
07-20-2013, 12:35 PM #13
You're in the united states... so am i! Big Grin

You need some euro lights though don't you? Wink

(07-19-2013, 09:15 AM)sassparilla_kid
(07-17-2013, 09:11 AM)capflya
(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.

It doesn't matter to me, I'll try to get some pictures in the next couple days though

Thanks.
This post was last modified: 07-20-2013, 12:37 PM by capflya.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
07-20-2013, 12:35 PM #13

You're in the united states... so am i! Big Grin

You need some euro lights though don't you? Wink


(07-19-2013, 09:15 AM)sassparilla_kid
(07-17-2013, 09:11 AM)capflya
(07-17-2013, 08:53 AM)sassparilla_kid I have some lights I believe are euros for a w124 in my garage, I can try to get pictures later if you're interested

Yeah, I may be interested. Were you looking for a trade or just to sell them? I'm open to either.

It doesn't matter to me, I'll try to get some pictures in the next couple days though

Thanks.




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

sassparilla_kid
diesel > all other fuels

1,618
07-28-2013, 07:12 PM #14
Sorry for the delay capflya, here's the link from when I originally got the euro lamps because my phone is dumb when it comes to posting photos for some reason

http://www.superturbodiesel.com/std/thread-3875.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-28-2013, 07:12 PM #14

Sorry for the delay capflya, here's the link from when I originally got the euro lamps because my phone is dumb when it comes to posting photos for some reason

http://www.superturbodiesel.com/std/thread-3875.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

capflya
Dreaming of a VNT

309
07-28-2013, 07:23 PM #15
Sent you a pm.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
07-28-2013, 07:23 PM #15

Sent you a pm.




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

MFSuper90
Budget Builder

1,533
08-02-2013, 07:43 PM #16
Wonder how much shipping would be for the 2.88 to 45750...
Then again, I have to many projects as it is.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-02-2013, 07:43 PM #16

Wonder how much shipping would be for the 2.88 to 45750...
Then again, I have to many projects as it is.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

capflya
Dreaming of a VNT

309
08-02-2013, 08:24 PM #17
It's around $80, didn't seem to matter where I put for a destination zip. There's a guy on PP that says he wants it and is supposed to pick it up this month but I haven't received any payment to hold it or anything.



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
08-02-2013, 08:24 PM #17

It's around $80, didn't seem to matter where I put for a destination zip. There's a guy on PP that says he wants it and is supposed to pick it up this month but I haven't received any payment to hold it or anything.




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

MFSuper90
Budget Builder

1,533
08-04-2013, 09:43 AM #18
Dang that's tempting. I better wait til I get some of my other stuff sone

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-04-2013, 09:43 AM #18

Dang that's tempting. I better wait til I get some of my other stuff sone


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)