Pump timing on a om603

STD Tuning Engine Pump timing on a om603

Pump timing on a om603

Pump timing on a om603

View a Printable Version

0 Vote(s) - 0 Average

Tito

Holset

354

08-26-2013, 03:14 PM #1

Hey guys, let me quickly introduce myself. I'm Rico, 23 years, living in The Netherlands and bulding a om603 with 7mm pump and holsett hx35w. I had this project for 2.5 years now. It's coming to an end. The only thing I don't know is the pump timing. Can someone tell me what would be the best safe-power timing? I thought i could just look it up but there doesn't seem to be much info about it. Checking the timing is taking out de governer bolt, and insert the tool and check the timing marks on the crank pulley right?

Also a little question, will a full-flow oil cooler be good for the turbo? I think not right?

Thanks in advance guys Cool

Cool

Tito

08-26-2013, 03:14 PM #1

Hey guys, let me quickly introduce myself. I'm Rico, 23 years, living in The Netherlands and bulding a om603 with 7mm pump and holsett hx35w. I had this project for 2.5 years now. It's coming to an end. The only thing I don't know is the pump timing. Can someone tell me what would be the best safe-power timing? I thought i could just look it up but there doesn't seem to be much info about it. Checking the timing is taking out de governer bolt, and insert the tool and check the timing marks on the crank pulley right?

Also a little question, will a full-flow oil cooler be good for the turbo? I think not right?

Thanks in advance guys Cool

GT2559V

189

08-27-2013, 09:29 AM #2

http://www.w124performance.com/service/w...1-8410.pdf
http://www.w124performance.com/service/I...chElec.htm

Smile

Smile

HaavardPYA

08-27-2013, 09:29 AM #2

http://www.w124performance.com/service/w...1-8410.pdf
http://www.w124performance.com/service/I...chElec.htm

Smile

Tito

Holset

354

08-27-2013, 11:41 AM #3

Thanks

Smile

Original pump timing is 14* after tdc. So I think I can do 12* right? For the little extra power and still be safe.

Tito

08-27-2013, 11:41 AM #3

Thanks Smile

Original pump timing is 14* after tdc. So I think I can do 12* right? For the little extra power and still be safe.

GT2559V

189

08-27-2013, 02:38 PM #4

Rather the uther way Smile

Smile

16-17

HaavardPYA

08-27-2013, 02:38 PM #4

Rather the uther way Smile 16-17

Tito

Holset

354

08-28-2013, 05:58 AM #5

Of course... My bad Blush

Blush

Tito

08-28-2013, 05:58 AM #5

Of course... My bad Blush

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
3 Guest(s)

Users browsing this thread:
3 Guest(s)