Swapping 606 into 603 car. Can I retain cruise control?
Swapping 606 into 603 car. Can I retain cruise control?
01-03-2014, 01:20 PM
#1
raysorenson
01-03-2014, 01:20 PM #1Once you install the 603 pump on the 606, is there a place to bolt the cruise control servo from the 603 motor?
01-03-2014, 06:27 PM
#2
(01-03-2014, 01:20 PM)raysorenson Once you install the 603 pump on the 606, is there a place to bolt the cruise control servo from the 603 motor?
I have been told you also have to swap the om603 oil filter housing or space the 606 oil filter housing out 20mm but that is hear say from another w126 owner that did a 606.962 swap in a 350sdl I have a 300sdl and have not gotten that far yet.
(01-03-2014, 01:20 PM)raysorenson Once you install the 603 pump on the 606, is there a place to bolt the cruise control servo from the 603 motor?
I have been told you also have to swap the om603 oil filter housing or space the om606 oil filter housing out 20mm but that is hear say from another w126 owner that did a606 swap on a 350sdl.
This post was last modified: 01-03-2014, 06:34 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
01-03-2014, 06:27 PM #2(01-03-2014, 01:20 PM)raysorenson Once you install the 603 pump on the 606, is there a place to bolt the cruise control servo from the 603 motor?
I have been told you also have to swap the om603 oil filter housing or space the 606 oil filter housing out 20mm but that is hear say from another w126 owner that did a 606.962 swap in a 350sdl I have a 300sdl and have not gotten that far yet.
(01-03-2014, 01:20 PM)raysorenson Once you install the 603 pump on the 606, is there a place to bolt the cruise control servo from the 603 motor?
I have been told you also have to swap the om603 oil filter housing or space the om606 oil filter housing out 20mm but that is hear say from another w126 owner that did a606 swap on a 350sdl.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
01-03-2014, 07:52 PM
#3
I've since answered my own question re:cruise. The '95 W124 w/NA 606 had mechanical cruise, so I should be fine there.
I guess the big one is, if I can reliably meet my power goals with a 603, why bother replacing it with a 606?
raysorenson
01-03-2014, 07:52 PM #3Thanks for the info. I just cracked my 14 head and I'm turning over installing my 21 head or installing a 606 motor.
I've since answered my own question re:cruise. The '95 W124 w/NA 606 had mechanical cruise, so I should be fine there.
I guess the big one is, if I can reliably meet my power goals with a 603, why bother replacing it with a 606?
01-04-2014, 03:30 PM
#4
(01-03-2014, 07:52 PM)raysorenson Thanks for the info. I just cracked my 14 head and I'm turning over installing my 21 head or installing a 606 motor.
I've since answered my own question re:cruise. The '95 W124 w/NA 606 had mechanical cruise, so I should be fine there.
I guess the big one is, if I can reliably meet my power goals with a 603, why bother replacing it with a 606?
then, what is your powergoals
---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
swampmonkey
01-04-2014, 03:30 PM #4(01-03-2014, 07:52 PM)raysorenson Thanks for the info. I just cracked my 14 head and I'm turning over installing my 21 head or installing a 606 motor.
I've since answered my own question re:cruise. The '95 W124 w/NA 606 had mechanical cruise, so I should be fine there.
I guess the big one is, if I can reliably meet my power goals with a 603, why bother replacing it with a 606?
then, what is your powergoals
---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
01-05-2014, 04:16 AM
#6
HaavardPYA
01-05-2014, 04:16 AM #6No problem with a 603. Sorry for ruining your thread, but does anyone know if the cruisecontrol works if you swap the 722.4 gearbox for the 722.3 gearbox?
raysorenson
01-05-2014, 06:47 PM #7As long as you retain the speedo cable, I can't imagine any problems.
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)