high mileage old 123? consider replacing the front coil springs out of hand
high mileage old 123? consider replacing the front coil springs out of hand
01-13-2014, 10:36 AM
#1
Thankfully this happened while the car was sitting, but I can't imagine what it would be like to lose a front spring while driving. Worth replacing old springs if your car has original stuff on there. This car has 370k on it.
The spring seat got all bent up, and for the interim until new springs are here, I cut off the end square and reinstalled the spring so the car is drivable. But I do not trust it right now
Attached Files
Image(s)1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
This happened overnight on my DD the other day. Car was not in use, ambient temp went from about 25 degrees to about 50. Spring let go as the vehicle was parked. I heard the noise from inside the house in the back in bed, pretty far away.
Thankfully this happened while the car was sitting, but I can't imagine what it would be like to lose a front spring while driving. Worth replacing old springs if your car has original stuff on there. This car has 370k on it.
The spring seat got all bent up, and for the interim until new springs are here, I cut off the end square and reinstalled the spring so the car is drivable. But I do not trust it right now
Attached Files
Image(s)1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-13-2014, 12:56 PM
#3
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-13-2014, 12:56 PM #3It's always the driver's front, that's the third failure like that I've seen. The mystery disappearing spring.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
01-13-2014, 01:00 PM
#4
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
If just broke ?
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
01-13-2014, 01:43 PM
#5
(01-13-2014, 01:00 PM)Greazzer If just broke ?
Yeah, snapped off with no one anywhere near it and backed in front of my house with that rock put there as extra insurance by me for the slope. Snug and comfortable for the night. Near as I can tell, it must have been the change in temp that did it. Micro cracks and corrosion and whatnot combined with ambient temp change, and it just failed. Earlier that day I was bombing around town, on the highway, ect.
It sounded like a garbage truck putting down a dumpster, like that low metallic boom.
(01-13-2014, 12:56 PM)Simpler=Better It's always the driver's front, that's the third failure like that I've seen. The mystery disappearing spring.
I'm gonna replace them all, the driver front was the first, but who knows which one is next?
The rear spring is not such a big deal on a 123, since the shock will keep it generally in place, but the front spring goes and that's it, it just flies out of the car.
(01-13-2014, 11:13 AM)larsalan cheap ass german steel.
Lol
Those damn germans, skimping on quality. I wanted 400k out of this spring, not 370
This post was last modified: 01-13-2014, 01:48 PM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-13-2014, 01:00 PM)Greazzer If just broke ?
Yeah, snapped off with no one anywhere near it and backed in front of my house with that rock put there as extra insurance by me for the slope. Snug and comfortable for the night. Near as I can tell, it must have been the change in temp that did it. Micro cracks and corrosion and whatnot combined with ambient temp change, and it just failed. Earlier that day I was bombing around town, on the highway, ect.
It sounded like a garbage truck putting down a dumpster, like that low metallic boom.
(01-13-2014, 12:56 PM)Simpler=Better It's always the driver's front, that's the third failure like that I've seen. The mystery disappearing spring.
I'm gonna replace them all, the driver front was the first, but who knows which one is next?
The rear spring is not such a big deal on a 123, since the shock will keep it generally in place, but the front spring goes and that's it, it just flies out of the car.
(01-13-2014, 11:13 AM)larsalan cheap ass german steel.
Lol
Those damn germans, skimping on quality. I wanted 400k out of this spring, not 370
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-13-2014, 04:34 PM
#6
(01-13-2014, 01:43 PM)JB3(01-13-2014, 12:56 PM)Simpler=Better It's always the driver's front, that's the third failure like that I've seen. The mystery disappearing spring.
I'm gonna replace them all, the driver front was the first, but who knows which one is next?
The rear spring is not such a big deal on a 123, since the shock will keep it generally in place, but the front spring goes and that's it, it just flies out of the car.
Want to go crazy on it? Install a limit strap like the jeep guys do on their crazy traveling suspensions. A cut up and sewn tow strap/seatbelt/etc. would work as a cheapy limiter.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-13-2014, 04:34 PM #6(01-13-2014, 01:43 PM)JB3(01-13-2014, 12:56 PM)Simpler=Better It's always the driver's front, that's the third failure like that I've seen. The mystery disappearing spring.
I'm gonna replace them all, the driver front was the first, but who knows which one is next?
The rear spring is not such a big deal on a 123, since the shock will keep it generally in place, but the front spring goes and that's it, it just flies out of the car.
Want to go crazy on it? Install a limit strap like the jeep guys do on their crazy traveling suspensions. A cut up and sewn tow strap/seatbelt/etc. would work as a cheapy limiter.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
01-13-2014, 05:29 PM
#7
I bought h&r lowest springs and new rubbermounts and lower balljoint from mercedes.
Got to love h&rs springs. Even got lowering susp for sls system
This post was last modified: 01-13-2014, 05:34 PM by john.
Holset power!
My did the same but it didnt pop out. Old rusty springs vs low tempature... mother nature one, shitty spring zero
I bought h&r lowest springs and new rubbermounts and lower balljoint from mercedes.
Got to love h&rs springs. Even got lowering susp for sls system
Holset power!
01-13-2014, 06:28 PM
#8
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Ok, my #2 dumb question, excluding the yards, where does one buy new springs ... without being robbed blind by the Steadlership ?
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
01-13-2014, 08:49 PM
#9
(01-13-2014, 06:28 PM)Greazzer Ok, my #2 dumb question, excluding the yards, where does one buy new springs ... without being robbed blind by the Steadlership ?
Autp parts warehouse .com sells them 60 bucks a pair for lejdhrofrews springs (or however the hell that's spelled)
They also sell the rears, pretty decent deal.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-13-2014, 06:28 PM)Greazzer Ok, my #2 dumb question, excluding the yards, where does one buy new springs ... without being robbed blind by the Steadlership ?
Autp parts warehouse .com sells them 60 bucks a pair for lejdhrofrews springs (or however the hell that's spelled)
They also sell the rears, pretty decent deal.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-13-2014, 08:59 PM
#10
that makes me wonder what the rest of the undercarriage looks like, I'm glad I'm not sharing the road up north anymore
This post was last modified: 01-13-2014, 09:02 PM by Austincarnut.
Austincarnut
01-13-2014, 08:59 PM #10pretty funny how the salt kills cars up there, I've seen the 126, 140, 203 and the 210 all blow up like that, never a 123. I just sold a 450k mile 123 and had zero issues w/ rust... I noticed on several cars working up north that a little crack in the paint would lead to this... but it was usually the last few coils or last tail of the spring. The 210 upper spring cup would tear off of the inner unibody and there is a repair that involves riveting the shit out of a large new panel to repair
that makes me wonder what the rest of the undercarriage looks like, I'm glad I'm not sharing the road up north anymore
01-15-2014, 10:13 PM
#11
(01-13-2014, 08:49 PM)JB3(01-13-2014, 06:28 PM)Greazzer Ok, my #2 dumb question, excluding the yards, where does one buy new springs ... without being robbed blind by the Steadlership ?
Autp parts warehouse .com sells them 60 bucks a pair for lejdhrofrews springs (or however the hell that's spelled)
They also sell the rears, pretty decent deal.
Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-13-2014, 08:49 PM)JB3(01-13-2014, 06:28 PM)Greazzer Ok, my #2 dumb question, excluding the yards, where does one buy new springs ... without being robbed blind by the Steadlership ?
Autp parts warehouse .com sells them 60 bucks a pair for lejdhrofrews springs (or however the hell that's spelled)
They also sell the rears, pretty decent deal.
Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-18-2014, 12:33 PM
#12
(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-21-2014, 03:00 AM
#13
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
01-21-2014, 03:00 AM #13Coulda just imported a set of 4 shiny new H&R springs from the UK at this point...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
01-21-2014, 09:10 AM
#14
(01-18-2014, 12:33 PM)JB3(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-21-2014, 09:10 AM #14(01-18-2014, 12:33 PM)JB3(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
01-21-2014, 10:20 AM
#15
(01-21-2014, 03:00 AM)mike-81-240d Coulda just imported a set of 4 shiny new H&R springs from the UK at this point...
that deprives me of the opportunity of debating the issue with a woman named "sunshine" from their call center like ive been doing. Thats her name spelled out no joke. He supervisor "moonbeam" was not available for comment.
(01-21-2014, 09:10 AM)Simpler=Better(01-18-2014, 12:33 PM)JB3(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
now have two front springs, its slowing happening, everything has already been ordered and paid for, just being debated and replaced. Their website it completely wrong though, otherwise the price isn't too bad per spring.
This post was last modified: 01-21-2014, 10:23 AM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-21-2014, 03:00 AM)mike-81-240d Coulda just imported a set of 4 shiny new H&R springs from the UK at this point...
that deprives me of the opportunity of debating the issue with a woman named "sunshine" from their call center like ive been doing. Thats her name spelled out no joke. He supervisor "moonbeam" was not available for comment.
(01-21-2014, 09:10 AM)Simpler=Better(01-18-2014, 12:33 PM)JB3(01-15-2014, 10:13 PM)JB3 Ok, looks like its 60 bucks a PIECE instead. Their website is pretty misleading. So I have a single pretty spring in hand now, and have to order another at the end of the month it look like.
auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
now have two front springs, its slowing happening, everything has already been ordered and paid for, just being debated and replaced. Their website it completely wrong though, otherwise the price isn't too bad per spring.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-21-2014, 11:04 PM
#16
(01-21-2014, 10:20 AM)JB3(01-21-2014, 03:00 AM)mike-81-240d Coulda just imported a set of 4 shiny new H&R springs from the UK at this point...
that deprives me of the opportunity of debating the issue with a woman named "sunshine" from their call center like ive been doing. Thats her name spelled out no joke. He supervisor "moonbeam" was not available for comment.
(01-21-2014, 09:10 AM)Simpler=Better(01-18-2014, 12:33 PM)JB3 auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
now have two front springs, its slowing happening, everything has already been ordered and paid for, just being debated and replaced. Their website it completely wrong though, otherwise the price isn't too bad per spring.
Any way they might have some stiffer rear springs? My car looks like a damn lifted pre runner or something in the front, and like a cholo low rider in the rear
This post was last modified: 01-21-2014, 11:05 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-21-2014, 11:04 PM #16That's because "Moonbeam" is over here trying to govern California, only problem is his head is so far up his ass that the lump in his throat is his nose
(01-21-2014, 10:20 AM)JB3(01-21-2014, 03:00 AM)mike-81-240d Coulda just imported a set of 4 shiny new H&R springs from the UK at this point...
that deprives me of the opportunity of debating the issue with a woman named "sunshine" from their call center like ive been doing. Thats her name spelled out no joke. He supervisor "moonbeam" was not available for comment.
(01-21-2014, 09:10 AM)Simpler=Better(01-18-2014, 12:33 PM)JB3 auto parts warehouse is killing me on this. I just got shipped a rear spring for a 124 instead of a 123. I now have in hand, a single new front spring, and a single new rear spring.
By the time im done getting 4 of the things in hand, I will have paid for 6 different shipping events and returns. Their courteous and idiotic call center people are infuriating.
Time to file a chargeback and send the old ones back via "receiver pays shipping" UPS.
On PP there was a thread with guys ordering custom springs from somewhere near the Carolinas, and they weren't too expensive either.
Or bite the bullet & go local. If NAPA/O'Rielley's is too expensive Advance Auto has a bunch of $40 off $100 online but pick up in stores coupons.
now have two front springs, its slowing happening, everything has already been ordered and paid for, just being debated and replaced. Their website it completely wrong though, otherwise the price isn't too bad per spring.
Any way they might have some stiffer rear springs? My car looks like a damn lifted pre runner or something in the front, and like a cholo low rider in the rear
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-22-2014, 09:40 AM
#17
(01-21-2014, 11:04 PM)sassparilla_kid Any way they might have some stiffer rear springs? My car looks like a damn lifted pre runner or something in the front, and like a cholo low rider in the rear
you aren't the only one with that problem. New front springs installed, front end is extremely high. Waiting on one rear spring now to hopefully level this SOB out a little. Rides great though. The front springs I put in were just the direct lesjofor replacements, im betting the rear springs are similarly fatigued, maybe even more so, and will get rid of the low rider look without searching for stiffer springs. Im betting you have that issue too, but we will see what they do for this car soon enough
![[Image: 0044_zps8d26c441.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/0044_zps8d26c441.jpg.html)
Check out how much taller the new spring is than the 370k spring, about 1.5 inches-
![[Image: 0024_zpsa6fcc4f5.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/0024_zpsa6fcc4f5.jpg.html)
This post was last modified: 01-22-2014, 09:43 AM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-21-2014, 11:04 PM)sassparilla_kid Any way they might have some stiffer rear springs? My car looks like a damn lifted pre runner or something in the front, and like a cholo low rider in the rear
you aren't the only one with that problem. New front springs installed, front end is extremely high. Waiting on one rear spring now to hopefully level this SOB out a little. Rides great though. The front springs I put in were just the direct lesjofor replacements, im betting the rear springs are similarly fatigued, maybe even more so, and will get rid of the low rider look without searching for stiffer springs. Im betting you have that issue too, but we will see what they do for this car soon enough
Check out how much taller the new spring is than the 370k spring, about 1.5 inches-
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-22-2014, 05:40 PM
#18
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
WHAT THE HELL WITH THAT SNOW ! OMG. Thank God for the Sunny South. LOL
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
01-22-2014, 07:25 PM
#19
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
That's just how my car looks. Took off those rubber bits by the bumpers and then 'tucked' the bumpers as they call it. Now slush flies into that back bumper and it will fill up with a big ole block of ice. Keep a flat bar handy to help open the door
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
01-23-2014, 10:50 AM
#20
Both cars now have new springs, his W126 and my W124. Much nicer in this snow stuff we've been having this year.
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
The '91 W126 in my sig is driven by my brother. It had a broken passenger side front spring last summer. We were lucky because it didn't come out. It wedged itself between the broken bit of spring and the inner part of the lower control arm.
Both cars now have new springs, his W126 and my W124. Much nicer in this snow stuff we've been having this year.
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
01-24-2014, 07:06 PM
#21
(01-22-2014, 05:40 PM)Greazzer WHAT THE HELL WITH THAT SNOW ! OMG. Thank God for the Sunny South. LOL
heh, if that bothers you, I present you with this-
tasty salt coating
![[Image: 005_zps165c9d0b.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/005_zps165c9d0b.jpg.html)
![[Image: 006_zps94f05d98.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/006_zps94f05d98.jpg.html)
new rear springs did the trick, I gained 3.5 inches of height in the rear!
![[Image: 007_zps360ea792.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/007_zps360ea792.jpg.html)
before and after-
![[Image: 002_zpsb3686128.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/002_zpsb3686128.jpg.html)
![[Image: 011_zps792c8490.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/011_zps792c8490.jpg.html)
another before and after-
![[Image: 014_zps4aac627c.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/014_zps4aac627c.jpg.html)
new spring ready for the protective salting
![[Image: 010_zpsb0cae2e9.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/010_zpsb0cae2e9.jpg.html)
the difference in ride is amazing, almost like its got a new suspension!
This post was last modified: 01-24-2014, 07:10 PM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-22-2014, 05:40 PM)Greazzer WHAT THE HELL WITH THAT SNOW ! OMG. Thank God for the Sunny South. LOL
heh, if that bothers you, I present you with this-
tasty salt coating
new rear springs did the trick, I gained 3.5 inches of height in the rear!
before and after-
another before and after-
new spring ready for the protective salting
the difference in ride is amazing, almost like its got a new suspension!
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
01-24-2014, 07:26 PM
#22
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Screw that snow and salt deal. I grew up in the NE and had my fair share of it ... If I had that mess, I would have to run my car thru the car wash everyday ...
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
01-24-2014, 09:23 PM
#23
Also I think your CV joint is about to get fucked, looking at the boot
This post was last modified: 01-24-2014, 09:32 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-24-2014, 09:23 PM #23Holy shit that's a huge difference in the rear!!! Where did you get those rear springs!?!?
Also I think your CV joint is about to get fucked, looking at the boot
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-25-2014, 06:59 AM
#24
(01-24-2014, 07:26 PM)Greazzer Screw that snow and salt deal. I grew up in the NE and had my fair share of it ... If I had that mess, I would have to run my car thru the car wash everyday ...
As soon as it gets above freezing, car wash is my first destination, I agree.
(01-24-2014, 09:23 PM)sassparilla_kid Holy shit that's a huge difference in the rear!!! Where did you get those rear springs!?!?
Also I think your CV joint is about to get fucked, looking at the boot
Autopartswarehouse.com has them. Though the springs for a 123 are mislabeled at 2 springs for 65 bucks or so, its actually only one spring that's sold at that price, fyi.
I've got new axles ready to go in, that axle is only a year old and the boots and staps were crap. All broke within 3 months. Next repair for this car, I assure you.
This post was last modified: 01-25-2014, 07:04 AM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(01-24-2014, 07:26 PM)Greazzer Screw that snow and salt deal. I grew up in the NE and had my fair share of it ... If I had that mess, I would have to run my car thru the car wash everyday ...
As soon as it gets above freezing, car wash is my first destination, I agree.
(01-24-2014, 09:23 PM)sassparilla_kid Holy shit that's a huge difference in the rear!!! Where did you get those rear springs!?!?
Also I think your CV joint is about to get fucked, looking at the boot
Autopartswarehouse.com has them. Though the springs for a 123 are mislabeled at 2 springs for 65 bucks or so, its actually only one spring that's sold at that price, fyi.
I've got new axles ready to go in, that axle is only a year old and the boots and staps were crap. All broke within 3 months. Next repair for this car, I assure you.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
Users browsing this thread:
22 Guest(s)
22 Guest(s)
Users browsing this thread:
22 Guest(s)
22 Guest(s)