STD Tuning Engine !!! URGENT !!! My engine knocking severely!!

!!! URGENT !!! My engine knocking severely!!

!!! URGENT !!! My engine knocking severely!!

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
pmj4147
Website Find
T04R + TD06

42
03-19-2014, 02:13 PM #1
Reply
Reply
OM662 2.9 with 7.5mm
2Bar boost, TD06 25G

I changed headgasket to new one, And i lowered compression ratio to about 17.5:1

Re assembled, Changed turbocharger.


THEN THE KNOCK STARTED
And it's killing my mental.

It's too severe.


What's a cause of knock????

I added cetane booster to my fuel, didn't work
Then changed IP timing both way....didn't work...

Lowed compression could be a reason???
Or the injector can be a reason???

Please help me..... it's going to kill my engine soon.
I have to stop it.
This post was last modified: 03-19-2014, 02:16 PM by pmj4147.
-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------
pmj4147
03-19-2014, 02:13 PM #1

OM662 2.9 with 7.5mm
2Bar boost, TD06 25G

I changed headgasket to new one, And i lowered compression ratio to about 17.5:1

Re assembled, Changed turbocharger.


THEN THE KNOCK STARTED
And it's killing my mental.

It's too severe.


What's a cause of knock????

I added cetane booster to my fuel, didn't work
Then changed IP timing both way....didn't work...

Lowed compression could be a reason???
Or the injector can be a reason???

Please help me..... it's going to kill my engine soon.
I have to stop it.

-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------

Reply
Reply
erling66
Find
SuperDieselVan

294
03-19-2014, 02:36 PM #2
Reply
Reply
Try to loosen one injector line at a time, then you will know if it is an injector. And make a video, put it on youtube with a link here.
HuhCoolTongue
erling66
03-19-2014, 02:36 PM #2

Try to loosen one injector line at a time, then you will know if it is an injector. And make a video, put it on youtube with a link here.

HuhCoolTongue

Reply
Reply
john
Find
GTA2056V

90
03-19-2014, 02:48 PM #3
Reply
Reply
Check your timing. Maybe the chain has jumped on notch during disasembly
Holset power!
john
03-19-2014, 02:48 PM #3

Check your timing. Maybe the chain has jumped on notch during disasembly

Holset power!

Reply
Reply
hansendk
Find
TA 0301

51
03-19-2014, 06:55 PM #4
Reply
Reply
are you sure that your new gasket is for 89 mm pistons and not for 87 mm.

how did you lower the compression machine the pistons or what.
hansendk
03-19-2014, 06:55 PM #4

are you sure that your new gasket is for 89 mm pistons and not for 87 mm.

how did you lower the compression machine the pistons or what.

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)