W201 OM602 box on an OM606
W201 OM602 box on an OM606
04-24-2014, 12:56 PM
#1
But… the 2.5 straight diesel manual gearbox is a cause for concern. I plan to run the engine at about 300-350BHP but I'm worried about the gearbox having a hernia and blowing to pieces. Are there any nice bolt on boxes that could be used and handle the torque? Or would I have to use a BMW gearbox to handle it?
Cheers guys
Stefan
Hey guys… First time poster. I've been doing a lot of research about putting an OM606 into my 190D… most if seems pretty simple which is nice!
But… the 2.5 straight diesel manual gearbox is a cause for concern. I plan to run the engine at about 300-350BHP but I'm worried about the gearbox having a hernia and blowing to pieces. Are there any nice bolt on boxes that could be used and handle the torque? Or would I have to use a BMW gearbox to handle it?
Cheers guys
Stefan
.
04-25-2014, 02:27 PM
#6
If it don`t blow smoke , it must be broke ! W201-
rafael cotrim
04-25-2014, 02:27 PM #6when i start building my w201 with a Om606, also i am thinking to use a six speeds gearbox with single mass clutch
If it don`t blow smoke , it must be broke ! W201-
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)