FS: W123 rear headrest kit
FS: W123 rear headrest kit
Note: I don't think you can just use the W126 headrests as-is, because the first bend on the W126's frame post is greater than 90 degrees, whereas on the W123's frame post it's slightly less than 90 degrees. But, I didn't actually try it.
$150 plus shipping, to anywhere in the lower 48.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
05-14-2014, 08:49 PM #1The mounting kit, complete: the four attachment channels, the two long seatback strut pieces, the four through-top-of-seatback grommets, and the two frames. No cushions. However, I'll throw in the W126 rear headrests shown in the picture--I *think* an upholstery shop should be able to make these W126 cushions swap right over. Or, you can take rear headrest cushions from a wagon. Or, if you wanted to be extra fancy, you could try putting bat-ear early W123 bamboo headrests on (I can sell you a pair for $50, shipped).
Note: I don't think you can just use the W126 headrests as-is, because the first bend on the W126's frame post is greater than 90 degrees, whereas on the W123's frame post it's slightly less than 90 degrees. But, I didn't actually try it.
$150 plus shipping, to anywhere in the lower 48.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
Gota love Mercedes Diesels!
.
DeliveryValve
05-19-2014, 02:26 PM #3The headrest posts and mounting brackets will work. But you'll need to acquire the two additional support braces as the w123's are shorter.
Gota love Mercedes Diesels!
.
2 Guest(s)
2 Guest(s)