W123 Air Conditioning
W123 Air Conditioning
06-09-2014, 11:39 AM
#1
1983 300D Turbo Diesel
BerlinerWillie
06-09-2014, 11:39 AM #1I purchased my 300D without a compressor and some lines. The body was too good to pass up. Anyway, I can go with stock Delco unit and new lower/upper manifold line(s) & Freeze 12, or I can go with a Sanden 134 aftermarket solution. None of these vendors seem to be in business any longer. I cannot get a response from Klima or European Cooler Air. Any other vendors out there that handle these components? If not, I will go the stock route. How about the refrigerant lines? I cannot find the manifold lines aftermarket. I may just have to go to MB. Any other solution recommendations will be greatly appreciated. Thanks.
1983 300D Turbo Diesel
06-09-2014, 12:24 PM
#2
(06-09-2014, 11:39 AM)BerlinerWillie I purchased my 300D without a compressor and some lines. The body was too good to pass up. Anyway, I can go with stock Delco unit and new lower/upper manifold line(s) & Freeze 12, or I can go with a Sanden 134 aftermarket solution. None of these vendors seem to be in business any longer. I cannot get a response from Klima or European Cooler Air. Any other vendors out there that handle these components? If not, I will go the stock route. How about the refrigerant lines? I cannot find the manifold lines aftermarket. I may just have to go to MB. Any other solution recommendations will be greatly appreciated. Thanks.
You can always get the sanden compressor online. You will need a mounting kit for it. You can make one or buy one. i think a guy on peachparts makes them for about $150
as far as lines, have you checked with a hydraulic shop? I know they usually makes hoses and they might be able to fabricate some for you,.
Purplecomputer
06-09-2014, 12:24 PM #2(06-09-2014, 11:39 AM)BerlinerWillie I purchased my 300D without a compressor and some lines. The body was too good to pass up. Anyway, I can go with stock Delco unit and new lower/upper manifold line(s) & Freeze 12, or I can go with a Sanden 134 aftermarket solution. None of these vendors seem to be in business any longer. I cannot get a response from Klima or European Cooler Air. Any other vendors out there that handle these components? If not, I will go the stock route. How about the refrigerant lines? I cannot find the manifold lines aftermarket. I may just have to go to MB. Any other solution recommendations will be greatly appreciated. Thanks.
You can always get the sanden compressor online. You will need a mounting kit for it. You can make one or buy one. i think a guy on peachparts makes them for about $150
as far as lines, have you checked with a hydraulic shop? I know they usually makes hoses and they might be able to fabricate some for you,.
06-09-2014, 06:32 PM
#3
raysorenson
06-09-2014, 06:32 PM #3Yep, dude on PP is selling mounts. I'd keep it simple and get junkyard stock stuff, find some R12 on craigslist and call it a day. A healthy bone stock late 123 system with R12 works fine in an AL summer.
06-09-2014, 06:59 PM
#4
(06-09-2014, 11:39 AM)BerlinerWillie I purchased my 300D without a compressor and some lines. The body was too good to pass up. Anyway, I can go with stock Delco unit and new lower/upper manifold line(s) & Freeze 12, or I can go with a Sanden 134 aftermarket solution. None of these vendors seem to be in business any longer. I cannot get a response from Klima or European Cooler Air. Any other vendors out there that handle these components? If not, I will go the stock route. How about the refrigerant lines? I cannot find the manifold lines aftermarket. I may just have to go to MB. Any other solution recommendations will be greatly appreciated. Thanks.
Austincarnut
06-09-2014, 06:59 PM #4I have lines and other ac parts, I'm slow as hell to get things in the mail though, prices are competitive! let me know if you need something
(06-09-2014, 11:39 AM)BerlinerWillie I purchased my 300D without a compressor and some lines. The body was too good to pass up. Anyway, I can go with stock Delco unit and new lower/upper manifold line(s) & Freeze 12, or I can go with a Sanden 134 aftermarket solution. None of these vendors seem to be in business any longer. I cannot get a response from Klima or European Cooler Air. Any other vendors out there that handle these components? If not, I will go the stock route. How about the refrigerant lines? I cannot find the manifold lines aftermarket. I may just have to go to MB. Any other solution recommendations will be greatly appreciated. Thanks.
06-20-2014, 02:16 AM
#5
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
the PP source is "ROLLGUY" and i can vouch that he is for real. i have the kit in hand.
english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates
06-20-2014, 12:52 PM
#6
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
I have his (ROLLGUY) kit too. Great product and Great customer service !
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)