Broken ABS sensor off, rest is still in diff.
Broken ABS sensor off, rest is still in diff.
07-23-2014, 09:20 AM
#2
(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
Gota love Mercedes Diesels!
.
DeliveryValve
07-23-2014, 09:20 AM #2(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
Gota love Mercedes Diesels!
.
07-23-2014, 01:57 PM
#3
(07-23-2014, 09:20 AM)DeliveryValve(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
I mean, its physically broken. Tried pulling it off when swapping in the new one. Guess I will pull the diff and see if I can get at it on the inside.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(07-23-2014, 09:20 AM)DeliveryValve(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
I mean, its physically broken. Tried pulling it off when swapping in the new one. Guess I will pull the diff and see if I can get at it on the inside.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
07-23-2014, 02:17 PM
#4
(07-23-2014, 01:57 PM)winmutt(07-23-2014, 09:20 AM)DeliveryValve(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
I mean, its physically broken. Tried pulling it off when swapping in the new one. Guess I will pull the diff and see if I can get at it on the inside.
Negative. There is no way you can get it from the inside without pressing out the pinion. Your just going to have to drill, screw in a lag bolt to hook it up to a slide hammer and slide hammer it out.
.
Gota love Mercedes Diesels!
.
DeliveryValve
07-23-2014, 02:17 PM #4(07-23-2014, 01:57 PM)winmutt(07-23-2014, 09:20 AM)DeliveryValve(07-23-2014, 08:40 AM)winmutt Suggestions?
Unbolt it and pull it off?
I mean, its physically broken. Tried pulling it off when swapping in the new one. Guess I will pull the diff and see if I can get at it on the inside.
Negative. There is no way you can get it from the inside without pressing out the pinion. Your just going to have to drill, screw in a lag bolt to hook it up to a slide hammer and slide hammer it out.
.
Gota love Mercedes Diesels!
.
07-24-2014, 10:22 AM
#6
(07-23-2014, 02:33 PM)mario Put a screw into the remaining section and try and collapse the side of the remaing bit and it might come out
Ya, I havent been able to get a screw to hold in there yet.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(07-23-2014, 02:33 PM)mario Put a screw into the remaining section and try and collapse the side of the remaing bit and it might come out
Ya, I havent been able to get a screw to hold in there yet.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
07-24-2014, 11:11 AM
#7
Gota love Mercedes Diesels!
.
DeliveryValve
07-24-2014, 11:11 AM #7Your gonna have to post pics of this so we can see what is happening.
Gota love Mercedes Diesels!
.
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)