Swapping OM606 into my SDL at this moment...
Swapping OM606 into my SDL at this moment...
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
So I am in the process of swapping an OM606 into my 87 SDL. I am also swapping an 722.633 also but realized that I would have to get an inline motor bellhousing so I got one of those this morning. I swapped the bellhousings today and pulled the motor just now. I am planning on getting this running by tomorrow so quick responses would be great. It looks like I can swap my oil filter housing so I can keep my oil cooler lines. I see that I have to swap mounts. Should I swap oil pans or not? The OM606 pan looks bigger. I still have to swap my built pump so I will check back in a hour. Thanks for the help.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
If anyone has any questions they can ask me while its fresh in my mind.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
Done!
If anyone has any questions they can ask me while its fresh in my mind.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
The Internet is your friend?
I am not swapping the pan, my 606 was low enough miles I didn't want to change the oil pump so I could reuse the 603 pan. I opted for a 500E bar.
racerxoffl
12-15-2014, 12:59 PM #3http://www.benzworld.org/forums/w124-e-c...-s124.html
The Internet is your friend?
I am not swapping the pan, my 606 was low enough miles I didn't want to change the oil pump so I could reuse the 603 pan. I opted for a 500E bar.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
Yeah I kept my 603 pan and also the filter housing. I modded the cruise to work and welded a bracket for the throttle. I didnt have to change the oil pump when I swapped my pan just for you information.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
racerxoffl
12-15-2014, 03:48 PM #5Were you able to find the motor nearby this is the fastest I have ever seen someone tackle one of these. Mine took about 2 weeks to be drivable, but not finished.
(12-15-2014, 03:48 PM)racerxoffl Were you able to find the motor nearby this is the fastest I have ever seen someone tackle one of these. Mine took about 2 weeks to be drivable, but not finished.
BTW your car looks nice!
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
Motor I ordered online ahead of time. Trans for S500 I had. I had to get an in line bellhousing locally but found one and got one Saturday. I took the exhaust flange off my 603 motor and welded it to my om606 motor to fit my HX40/35. I still have to finish wiring my trans controller as I got the wrong shifter.
(12-15-2014, 03:48 PM)racerxoffl Were you able to find the motor nearby this is the fastest I have ever seen someone tackle one of these. Mine took about 2 weeks to be drivable, but not finished.
BTW your car looks nice!
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
I just want to update my post so there is no misinformation out there.....After running my car for a bit I figured out you can not run the OM606 pickup with the OM603 pan. I ended up having low oil pressure and so I took off the little side wing and luckily I was able to swap back over to the OM603 pickup. Talk about needed tiny hands though. Low oil pressure solved!
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
5 Guest(s)
5 Guest(s)