For Sale - Brand New HE221W
For Sale - Brand New HE221W
I bought this to go along with my 6mm pump, but my plans and power goals have changed, this turbo is too small.
Mounted but never ran. I moved the wastegate, the original location didn't work. Bought a new bracket, drilled and tapped the housing to move it. Clocked the housings to the correct orientation, at least for a 617.
Here it is mounted on the engine. OM617, W123 chassis (so you can see how it fits)
Comes with all the goodies attached. Took me a while to acquire them all.
Turbo itself $460
Compressor elbow $90
Clamp and O-ring $40
Oil Drain $15
Oil Feed to -4AN fitting $15
Exhaust flange, stainless steel, 3" v-band $140
T3 to T25 adaptor $25
Total $785, not including all the separate shipping
I'll let it go for $750
Free shipping to Continental US.
PM me if interested or if you have questions
Im taking it off Sunday, I can take more pictures.
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
02-20-2015, 09:49 PM #1Brand New, Genuine HE221W 6cm turbine housing Flows 37 lbs/min
I bought this to go along with my 6mm pump, but my plans and power goals have changed, this turbo is too small.
Mounted but never ran. I moved the wastegate, the original location didn't work. Bought a new bracket, drilled and tapped the housing to move it. Clocked the housings to the correct orientation, at least for a 617.
Here it is mounted on the engine. OM617, W123 chassis (so you can see how it fits)
Comes with all the goodies attached. Took me a while to acquire them all.
Turbo itself $460
Compressor elbow $90
Clamp and O-ring $40
Oil Drain $15
Oil Feed to -4AN fitting $15
Exhaust flange, stainless steel, 3" v-band $140
T3 to T25 adaptor $25
Total $785, not including all the separate shipping
I'll let it go for $750
Free shipping to Continental US.
PM me if interested or if you have questions
Im taking it off Sunday, I can take more pictures.
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
I'd buy the compressor elbow if it would fit my turbo, but it probably won't. Did you go through your local cummins dealer for the elbow/exhaust flange/clamps?
I am about to buy a t3 to t25 adaptor plate also, so if that is for sale separately please let me know.
Also looking for an intake like that. I was dealing with Austincarnut on on one but no response for a bit now.
Karl
atypicalguy
02-21-2015, 10:00 AM #2Just bought a 200vg or it would have been tempting.
I'd buy the compressor elbow if it would fit my turbo, but it probably won't. Did you go through your local cummins dealer for the elbow/exhaust flange/clamps?
I am about to buy a t3 to t25 adaptor plate also, so if that is for sale separately please let me know.
Also looking for an intake like that. I was dealing with Austincarnut on on one but no response for a bit now.
Karl
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
02-21-2015, 11:54 AM #3Turbo and all associated items are sold pending cleared payment.
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
Thanks again!
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
02-26-2015, 02:23 PM #4SOLD!!
Thanks again!
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
(02-26-2015, 06:00 PM)Yatypicalguy Where did you source the intake elbow?
China. Aliexpress site. I'll see if I wrote the part number down somewhere
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
02-27-2015, 12:22 PM #6(02-26-2015, 06:00 PM)Yatypicalguy Where did you source the intake elbow?
China. Aliexpress site. I'll see if I wrote the part number down somewhere
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
6 Guest(s)
6 Guest(s)