OM606 & 722.6 Dimensions

STD Tuning Engine OM606 & 722.6 Dimensions

View a Printable Version

0 Vote(s) - 0 Average

matfield

GT2256V

104

03-15-2015, 03:26 AM #1

Hi Lads,

This may have been done before, but I can't find it on a search. Does anyone have exact measurements from the very front most part of the 606 and the output flange of the 722.6?

Also is there a difference in length of the 722.6 that comes as standard on the E300TD and the 722.634 W 5 A 580 that came on the E270CDI?

Thanks

Mat

matfield

03-15-2015, 03:26 AM #1

zeeman

Holset

444

03-15-2015, 08:30 PM #2

(03-15-2015, 03:26 AM)matfield Hi Lads,

This may have been done before, but I can't find it on a search. Does anyone have exact measurements from the very front most part of the 606 and the output flange of the 722.6?

Also is there a difference in length of the 722.6 that comes as standard on the E300TD and the 722.634 W 5 A 580 that came on the E270CDI?

Thanks

Mat

31 inches from front of crankshaft pulley to flange were bellhousing bolts on USA 98-99 E-300 OM 606. Can't answer about the E270CDI.

This post was last modified: 03-15-2015, 08:31 PM by zeeman.

zeeman

03-15-2015, 08:30 PM #2

(03-15-2015, 03:26 AM)matfield Hi Lads,

This may have been done before, but I can't find it on a search. Does anyone have exact measurements from the very front most part of the 606 and the output flange of the 722.6?

Also is there a difference in length of the 722.6 that comes as standard on the E300TD and the 722.634 W 5 A 580 that came on the E270CDI?

Thanks

Mat

31 inches from front of crankshaft pulley to flange were bellhousing bolts on USA 98-99 E-300 OM 606. Can't answer about the E270CDI.

matfield

GT2256V

104

03-17-2015, 02:41 PM #3

Thanks for that... its looking promising. All I need to do now is find measurements for the autobox Smile

matfield

03-17-2015, 02:41 PM #3

Thanks for that... its looking promising. All I need to do now is find measurements for the autobox Smile

erx

w202 om606

323

03-17-2015, 05:49 PM #4

All 722.6 mercedes boxes share the same rear part of housing, only front part with bellhousing is different with different engines (I6,V6,V8). 300td and 270cdi boxes are same sizes.

This post was last modified: 03-17-2015, 05:57 PM by erx.

erx

03-17-2015, 05:49 PM #4

All 722.6 mercedes boxes share the same rear part of housing, only front part with bellhousing is different with different engines (I6,V6,V8). 300td and 270cdi boxes are same sizes.

whipplem104

Holset

559

03-17-2015, 07:05 PM #5

The trans is 23.5". And they are not all the same length. Because the bellhousings differ in length as well due to different crank offset to the flange.

whipplem104

03-17-2015, 07:05 PM #5

The trans is 23.5". And they are not all the same length. Because the bellhousings differ in length as well due to different crank offset to the flange.

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
4 Guest(s)