om605 no MLS headgasket in early model?
om605 no MLS headgasket in early model?
Or is it so that some previous owner used a om602 headgasket. The engine had only made 280,000km.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
Found out on my engine from a w124 from -93 with om605 that it did not have a MLS headgasket. From what i have been reading all over the internet is that all om605 have Multi Layer Steel headgasket from factory.
Or is it so that some previous owner used a om602 headgasket. The engine had only made 280,000km.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
N/A engines come with regular headgaskets, and they are still for sale. 602 head gaskets dont fit the 605 but the oposite can be done.
A multy layer stell gasket is 3 times as expensive as the others, trouble is that regular head gaskets were discontinued from MB. thence aftermarket manufacturers may have discontinued the product.
between the turbo and the N/A gasket theres a small diff in the cooling holes.
regards.
FD,
Powered by tractor fuel
hy , nop
N/A engines come with regular headgaskets, and they are still for sale. 602 head gaskets dont fit the 605 but the oposite can be done.
A multy layer stell gasket is 3 times as expensive as the others, trouble is that regular head gaskets were discontinued from MB. thence aftermarket manufacturers may have discontinued the product.
between the turbo and the N/A gasket theres a small diff in the cooling holes.
regards.
FD,
Powered by tractor fuel
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
Ahh, thanks for clarifying that. This engine was an N/A. People dont mention this difference when they talk about N/A vs. Turbo engine of om605/606.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
glasser makes MLS gaskets at afordable prices. threre´s no reason not to use turbo instead of n/a . or the oposite, u just keep in mind that it may leak
FD,
Powered by tractor fuel
that is basic, and sometimes basic issues stay as basic, the most enlighted assume the less should know those things.
glasser makes MLS gaskets at afordable prices. threre´s no reason not to use turbo instead of n/a . or the oposite, u just keep in mind that it may leak
FD,
Powered by tractor fuel
3 Guest(s)
3 Guest(s)