How to prime IP on om603?

STD Maintenance General How to prime IP on om603?

0 Vote(s) - 0 Average

TotalDiesel
Unregistered

10-28-2009, 10:46 AM #1

This morning I go out to start my 300sdl and I cranked it over and it didnt start. It usually starts instantly. I looked at the fuel and it was on empty. The engine is not getting fuel. My other 0m617 has a manual had pump to prime the engine in case of this situation but the om603 does not. My car didnt come with a manual and have yet to find one. What can I do to prime this pump to get it started?

Thanks,

Jon

TotalDiesel

10-28-2009, 10:46 AM #1

~~ForcedInduction~~

Banned

3,628

10-28-2009, 01:46 PM #2

The OM60x engines do not have a manual primer, you have to crank the engine.

The M-pump on the euro OM61x engines have one, it can be used by moving the car's suction hose.

ForcedInduction

10-28-2009, 01:46 PM #2

The OM60x engines do not have a manual primer, you have to crank the engine.

The M-pump on the euro OM61x engines have one, it can be used by moving the car's suction hose.

totaldisaster

lightly modded OM606

211

11-03-2009, 11:25 PM #3

if the problem is persistent, consider re-sealing the delivery valve holders. Or just always park ass end-up on a hill

totaldisaster

11-03-2009, 11:25 PM #3

if the problem is persistent, consider re-sealing the delivery valve holders. Or just always park ass end-up on a hill

TotalDiesel
Unregistered

11-04-2009, 10:55 AM #4

Thanks, I turned the car around facing down hill and cranked it over a few times and it started. Thanks alot!

Jon

TotalDiesel

11-04-2009, 10:55 AM #4

Thanks, I turned the car around facing down hill and cranked it over a few times and it started. Thanks alot!

Jon

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
3 Guest(s)