wtb om648 sump,pump,tube dipstick
wtb om648 sump,pump,tube dipstick
50harleyrider
07-12-2015, 12:58 PM #1I'm converting my om606.962 to rear sump for 4x4 conversion project. I believe the MB part # is R6480140302. PM me if you have or any leads.
(07-12-2015, 12:58 PM)50harleyrider I'm converting my om606.962 to rear sump for 4x4 conversion project. I believe the MB part # is R6480140302. PM me if you have or any leads.
Try E-bay there is a guy that sells parts from Germany, bought one from him for half the price of one here even with the shipping. What are you putting it into?
(07-12-2015, 12:58 PM)50harleyrider I'm converting my om606.962 to rear sump for 4x4 conversion project. I believe the MB part # is R6480140302. PM me if you have or any leads.
Try E-bay there is a guy that sells parts from Germany, bought one from him for half the price of one here even with the shipping. What are you putting it into?
50harleyrider
07-13-2015, 06:32 AM #3It's going into a 97 F-150 4x4 with E4OD and previous 2v 5.4 gas guzzler. Bendtsen's will be supplying my plate and 7.3 torque converter. Will be running a PCS tranny controller or similar. I'd like to keep the engine low as possible and avoid having to go with a body lift if possible. I've been watching ebay but no luck yet. I saw this rear sump conversion on here by Gwagen users. Most of the rock crawler guys don't care about clearance as they're lifted anyhow. Thanks for the reply. PM me if you can help me locate one. Can't wait to get this awesome engine in my truck!
(07-13-2015, 09:02 PM)CRD4x4 Are you using the Dana 44 TTB or solid front?
Plan is to retain as much of the drivetrain as possible. OEM torsion bar front suspension and OEM front axle assy.
50harleyrider
07-14-2015, 09:59 AM #6(07-13-2015, 09:02 PM)CRD4x4 Are you using the Dana 44 TTB or solid front?
Plan is to retain as much of the drivetrain as possible. OEM torsion bar front suspension and OEM front axle assy.
4 Guest(s)
4 Guest(s)