Craiglist alert thread
Craiglist alert thread
04-13-2014, 05:27 PM
#451
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-13-2014, 05:27 PM #451Buy that immediately
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-14-2014, 06:23 PM
#452
(04-12-2014, 11:45 AM)mbz123(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)2K to drop in a motor! SRSLY?
I don't have a garage :*-( no major overhaul here yet.
One problem seems to be that no one except me trusts that if Zeitgeist (the seller-to-me) says it's a good engine, it really is a good engine.
Another problem is, there are a lot of junker rustbucket '87 300TD's running around in Oregon. As often as not, there's one on Portland or Eugene CL for $1,700 to $2,000. Therefore, people presume that $1,700 is a reasonable price to pay for a fully assembled, smoothly-running one, and they hope they will get one with an interior as nice as this one's for that price.
Zeitgeist himself quoted me $900 to install the engine. That's actually a bargain. The local indie wants $4,000 to swap a good OM603 into a car which has a blown OM603.
So I'm thinking, what I'll end up doing is, I'll assemble it, see if anyone will take it for $2,500, probably not, so I'll settle for $2,000. And then if lgreely83 or winmutt wants me to drive it 1,500 miles to Chicago or 2,000 miles to Atlanta, I'll charge $1,000 for the fuel, time, hotels, and airfare back.
Ergo, three grand. Seriously.
Make sense?
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-14-2014, 06:23 PM #452(04-12-2014, 11:45 AM)mbz123(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)2K to drop in a motor! SRSLY?
I don't have a garage :*-( no major overhaul here yet.
One problem seems to be that no one except me trusts that if Zeitgeist (the seller-to-me) says it's a good engine, it really is a good engine.
Another problem is, there are a lot of junker rustbucket '87 300TD's running around in Oregon. As often as not, there's one on Portland or Eugene CL for $1,700 to $2,000. Therefore, people presume that $1,700 is a reasonable price to pay for a fully assembled, smoothly-running one, and they hope they will get one with an interior as nice as this one's for that price.
Zeitgeist himself quoted me $900 to install the engine. That's actually a bargain. The local indie wants $4,000 to swap a good OM603 into a car which has a blown OM603.
So I'm thinking, what I'll end up doing is, I'll assemble it, see if anyone will take it for $2,500, probably not, so I'll settle for $2,000. And then if lgreely83 or winmutt wants me to drive it 1,500 miles to Chicago or 2,000 miles to Atlanta, I'll charge $1,000 for the fuel, time, hotels, and airfare back.
Ergo, three grand. Seriously.
Make sense?
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
04-15-2014, 02:33 PM
#453
JustPassinThru Make sense?Perfect. ;D
NOW, stop with this:
(04-14-2014, 06:23 PM)JustPassinThru ...So I'm thinking, what I'll end up doing is...
and ALL this:
(04-14-2014, 06:23 PM)JustPassinThru One problem seems to be...yahhh
(04-14-2014, 06:23 PM)JustPassinThru it really is a good engine.I really like them french fried taters
(04-14-2014, 06:23 PM)JustPassinThru Another problem is...mmhmm
(04-14-2014, 06:23 PM)JustPassinThru As often as not......Therefore, people presume.....and they hope they will get...yaaaaaaaaaaaaaaaaawwwwwwn
(04-14-2014, 06:23 PM)JustPassinThru Zeitgeist himself quoted...actually a bargain...The local indie ...a blown OM603.blah blah blah blah and wah wah wah wah
(04-14-2014, 06:23 PM)JustPassinThru if anyone will take it...And then if..wah wah
(04-14-2014, 06:23 PM)JustPassinThru ...for the fuel, time, hotels, and airfare...Ergo, three grand.whew!
now DO this:
(04-14-2014, 06:23 PM)JustPassinThru ...I'll assemble it...
BECAUSE this:
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)
now you see why I'm this;
(04-14-2014, 06:23 PM)MBZ123 SRSLY? 2K to drop in a motor! And you need time to think about... wat... exactly?
The wagon is all but sold, buyer waiting to hand over payment and you'd rather rehearse your Shakespeare in front of company. SRSLY? How rude.
I'm sure a few of us here would love to be head to toe grease all day, every day until we set off eastbound on I-70 for a Chi-town delivery. O ya, happens to be the bestest most besutifullest time of year to travel that route, too.
MBZ123
PS - A lil over three hundy in fuel to get there. And a little suggestion: Buy a return ticket on the California Zephyr. You'll never forget the trip back either. Yes, it seems you've been presented with what is known as a "golden opportunity" kiddo.
JustPassinThru Make sense?Perfect. ;D
NOW, stop with this:
(04-14-2014, 06:23 PM)JustPassinThru ...So I'm thinking, what I'll end up doing is...
and ALL this:
(04-14-2014, 06:23 PM)JustPassinThru One problem seems to be...yahhh
(04-14-2014, 06:23 PM)JustPassinThru it really is a good engine.I really like them french fried taters
(04-14-2014, 06:23 PM)JustPassinThru Another problem is...mmhmm
(04-14-2014, 06:23 PM)JustPassinThru As often as not......Therefore, people presume.....and they hope they will get...yaaaaaaaaaaaaaaaaawwwwwwn
(04-14-2014, 06:23 PM)JustPassinThru Zeitgeist himself quoted...actually a bargain...The local indie ...a blown OM603.blah blah blah blah and wah wah wah wah
(04-14-2014, 06:23 PM)JustPassinThru if anyone will take it...And then if..wah wah
(04-14-2014, 06:23 PM)JustPassinThru ...for the fuel, time, hotels, and airfare...Ergo, three grand.whew!
now DO this:
(04-14-2014, 06:23 PM)JustPassinThru ...I'll assemble it...
BECAUSE this:
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)
now you see why I'm this;
(04-14-2014, 06:23 PM)MBZ123 SRSLY? 2K to drop in a motor! And you need time to think about... wat... exactly?
The wagon is all but sold, buyer waiting to hand over payment and you'd rather rehearse your Shakespeare in front of company. SRSLY? How rude.
I'm sure a few of us here would love to be head to toe grease all day, every day until we set off eastbound on I-70 for a Chi-town delivery. O ya, happens to be the bestest most besutifullest time of year to travel that route, too.
MBZ123
PS - A lil over three hundy in fuel to get there. And a little suggestion: Buy a return ticket on the California Zephyr. You'll never forget the trip back either. Yes, it seems you've been presented with what is known as a "golden opportunity" kiddo.
04-15-2014, 03:29 PM
#454
I don't know about that "all but sold" bit; lgreely83 *did* put a wink smiley at the end of his offer. I suspect you are taking him too literally.
lgreely83, if you're seriously interested, PM me.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-15-2014, 03:29 PM #454> The wagon is all but sold, buyer waiting to hand over payment, and you'd rather rehearse your Shakespeare...
I don't know about that "all but sold" bit; lgreely83 *did* put a wink smiley at the end of his offer. I suspect you are taking him too literally.
lgreely83, if you're seriously interested, PM me.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
04-16-2014, 07:05 AM
#455
Seems pretty fair to me. That drive across the plains I'd say a car porter should get extra money for not crashing from falling asleep due to Boredoms.
This post was last modified: 04-16-2014, 07:09 AM by lgreeley83.
" straighten up that star on the grill, assholes."
lgreeley83
04-16-2014, 07:05 AM #455
Seems pretty fair to me. That drive across the plains I'd say a car porter should get extra money for not crashing from falling asleep due to Boredoms.
" straighten up that star on the grill, assholes."
04-16-2014, 08:29 AM
#456
" straighten up that star on the grill, assholes."
lgreeley83
04-16-2014, 08:29 AM #456OK I had to reread to see what's going on. That was really only semi serious. 1 I need a job first so my time is maybe June before I add to my fleet. 2 asking someone to drive across the country is a big endeavor. I imagine that offer is not so quick and easy. Selling local at a hit in the pocket may save more money than risking driving 1000 or more mile. A breakdown could add multiple Days at hotels. Days away from work. General headaches and frustrations. Also don't forget the highway pirates trying to steal your booty.
" straighten up that star on the grill, assholes."
04-16-2014, 10:49 AM
#457
Sometimes we giants take ourselves too seriously. That's why Demosthenes (not Shakespeare) invented philippics
http://en.wikipedia.org/wiki/Philippic
...which, when Cicero tried imitating them, got Cicero's hands chopped off by one of his targets, Mark Anthony
...which in turn was probably the real reason why Tacitus invented taciturnicity
http://dictionary.reference.com/browse/taciturn
and now my goatee is beginning to itch. Time to go enjoy an unfiltered Gauloise
http://www.you-smoke.com/category/11-gau...ettes.aspx
***edited: OMG, they're shutting the Gauloises factory:
http://www.bloomberg.com/news/2014-04-14...rance.html
Better stock up. Truly we are in the end times.***
This post was last modified: 04-25-2014, 06:20 PM by JustPassinThru.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-16-2014, 10:49 AM #457Yes, I didn't think it was anything but light humor.
Sometimes we giants take ourselves too seriously. That's why Demosthenes (not Shakespeare) invented philippics
http://en.wikipedia.org/wiki/Philippic
...which, when Cicero tried imitating them, got Cicero's hands chopped off by one of his targets, Mark Anthony
...which in turn was probably the real reason why Tacitus invented taciturnicity
http://dictionary.reference.com/browse/taciturn
and now my goatee is beginning to itch. Time to go enjoy an unfiltered Gauloise
http://www.you-smoke.com/category/11-gau...ettes.aspx
***edited: OMG, they're shutting the Gauloises factory:
http://www.bloomberg.com/news/2014-04-14...rance.html
Better stock up. Truly we are in the end times.***
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
04-16-2014, 10:31 PM
#458
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
04-16-2014, 10:31 PM #458The 603 sounds kind of tempting. hehe
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
04-30-2014, 05:50 PM
#459
http://providence.craigslist.org/cto/4421806461.html
This post was last modified: 04-30-2014, 05:51 PM by JB3.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
4 speed already converted 123 wagon. might be a good deal. guy wants 3500 starting price, and wants offers made, as hes on his way somewhere-
http://providence.craigslist.org/cto/4421806461.html
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
05-09-2014, 02:27 PM
#460
http://goldcountry.craigslist.org/cto/4446988621.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-09-2014, 02:27 PM #460W123 300D lange
http://goldcountry.craigslist.org/cto/4446988621.html
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
05-11-2014, 12:13 PM
#462
(05-11-2014, 02:54 AM)RonB In Australia and in very nice condition..
1976 300D W115
I had no idea w115 came with a turbo
Purplecomputer
05-11-2014, 12:13 PM #462(05-11-2014, 02:54 AM)RonB In Australia and in very nice condition..
1976 300D W115
I had no idea w115 came with a turbo
05-22-2014, 06:11 AM
#463
Turbo related stuff
TO BE EDITED
This post was last modified: 05-22-2014, 02:48 PM by meareweird.
05-22-2014, 09:45 AM
#464
Might want to use this one:
http://columbus.craigslist.org/pts/4480472158.html
I'd be interested in the turbo and exhaust manifold.
Sending a PM.
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
The link you put up will let people edit and end the posting.
Might want to use this one:
http://columbus.craigslist.org/pts/4480472158.html
I'd be interested in the turbo and exhaust manifold.
Sending a PM.
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
06-11-2014, 07:01 PM
#465
I can go look at it in person if anyone wants.
http://sfbay.craigslist.org/sby/pts/4498811797.html
Not my for sale ad but someone might be interested in this bumper.
I can go look at it in person if anyone wants.
http://sfbay.craigslist.org/sby/pts/4498811797.html
09-19-2014, 11:52 AM
#466
http://richmond.craigslist.org/cto/4625951222.html
No affiliation!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
1940's ratrod chopped dually truck with om617
http://richmond.craigslist.org/cto/4625951222.html
No affiliation!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
09-20-2014, 04:14 AM
#468
(09-19-2014, 06:56 PM)Edian727 that is super DUMB if someone buys it!
there, fixed that for you
"Those few things and you are on your way." ROTFF!!! He says this after informing everyone that the frame needs GUSSETING, the cab AND bed need to be MOUNTED, NOTHING resembling a braking system exists, NOR a wiring harness for that matter, n oh ya, a fuel tank and air pump will need to be figured out. This is a joke right? This clown has what amounts to around fifteen hundred duckets in scrap and in some hallucinatory state he says he wants WAT????
As if it couldn't get better, he divulges the small fact that HE has no time to finish, FOR HIMSELF OR A CUSTOMER! But why you ask? Simple, his business is booming! If he had no time, why start in on the project? If biz is so great, why not hire someone to do the work you've become disenchanted with? Always better odds of selling something that's operating even if highly customized to YOUR tastes. But alas, he stumbles forward in his grandelusion and lists off possible trades (MOST HAVING VALUE!) and has the gall to demand any potential trades not listed be "REAL." Because asking for outrageous $$$$$ or a running AND titled vehicle in exchange for his mountain of metal is so "REAL," did I get this right? Jimeny Cricket. Want proof he isn't even real? What did we learn about those individuals that use the phrase "honestly" or "to tell you the truth" when talking to you? Mmmmhmmm
We also learned about the birth rate of suckers which is why he put an ad up. My money is on him growing impatient, tho, with waiting for his sucker and heading down to the swap after he takes everything to pieces. Anyone giving odds???? And guess how much he'll total at the flea market? About fifteen sounds "REAL." amiriteoramirite.jpg
That reminds me, anybody know if a craigs turd thread exists here? If not, I have a suggestion for its christening post 8-D
MBZ123
(09-19-2014, 06:56 PM)Edian727 that is super DUMB if someone buys it!
there, fixed that for you
"Those few things and you are on your way." ROTFF!!! He says this after informing everyone that the frame needs GUSSETING, the cab AND bed need to be MOUNTED, NOTHING resembling a braking system exists, NOR a wiring harness for that matter, n oh ya, a fuel tank and air pump will need to be figured out. This is a joke right? This clown has what amounts to around fifteen hundred duckets in scrap and in some hallucinatory state he says he wants WAT????
As if it couldn't get better, he divulges the small fact that HE has no time to finish, FOR HIMSELF OR A CUSTOMER! But why you ask? Simple, his business is booming! If he had no time, why start in on the project? If biz is so great, why not hire someone to do the work you've become disenchanted with? Always better odds of selling something that's operating even if highly customized to YOUR tastes. But alas, he stumbles forward in his grandelusion and lists off possible trades (MOST HAVING VALUE!) and has the gall to demand any potential trades not listed be "REAL." Because asking for outrageous $$$$$ or a running AND titled vehicle in exchange for his mountain of metal is so "REAL," did I get this right? Jimeny Cricket. Want proof he isn't even real? What did we learn about those individuals that use the phrase "honestly" or "to tell you the truth" when talking to you? Mmmmhmmm
We also learned about the birth rate of suckers which is why he put an ad up. My money is on him growing impatient, tho, with waiting for his sucker and heading down to the swap after he takes everything to pieces. Anyone giving odds???? And guess how much he'll total at the flea market? About fifteen sounds "REAL." amiriteoramirite.jpg
That reminds me, anybody know if a craigs turd thread exists here? If not, I have a suggestion for its christening post 8-D
MBZ123
09-20-2014, 11:58 AM
#469
Anybody game? I've got one too many projects already and no room in the stable.
For those looking for coupe seats:
http://portland.craigslist.org/mlt/pts/4632843637.html
and a decent wagon:
http://portland.craigslist.org/clk/cto/4670772618.html
MBZ123
Not my speed, buuuuuuuuuut you may be on to something! Get her to finish the build THEN put them both up for sale... 8-D
Anybody game? I've got one too many projects already and no room in the stable.
For those looking for coupe seats:
http://portland.craigslist.org/mlt/pts/4632843637.html
and a decent wagon:
http://portland.craigslist.org/clk/cto/4670772618.html
MBZ123
09-21-2014, 05:04 AM
#470
(09-20-2014, 05:23 PM)CRD4x4 Re: Your 1980 300TD
I thought '81 was the first year of the 300TD in the USofA.
1981 was the first year for the turbo wagon here in the States. The 300TD, aka the W123 estate or S123, was sold in the US market from MY1979 to MY1985. Those sold in '79 and '80 had normally aspirated power plants. A few TD's rolled out in January '86, but the last model year for the W123 lineup was 1985.
Full disclosure - that's neither my wagon nor am I affiliated in any way with seller. Just bringing attention to it.
As listed, it's a decent deal. Unless the underside resembles Swiss cheese, which seems unlikely, it could be a score for someone local. A couple hours drive closer to me and I woulda been gettin fitted for my CWC jacket right now. 8-D
MBZ123
(09-20-2014, 05:23 PM)CRD4x4 Re: Your 1980 300TD
I thought '81 was the first year of the 300TD in the USofA.
1981 was the first year for the turbo wagon here in the States. The 300TD, aka the W123 estate or S123, was sold in the US market from MY1979 to MY1985. Those sold in '79 and '80 had normally aspirated power plants. A few TD's rolled out in January '86, but the last model year for the W123 lineup was 1985.
Full disclosure - that's neither my wagon nor am I affiliated in any way with seller. Just bringing attention to it.
As listed, it's a decent deal. Unless the underside resembles Swiss cheese, which seems unlikely, it could be a score for someone local. A couple hours drive closer to me and I woulda been gettin fitted for my CWC jacket right now. 8-D
MBZ123
09-30-2014, 06:42 PM
#471
http://greenville.craigslist.org/pts/4664320922.html
No affiliation.
On my wish list: $500 dry sump oiling setup
http://winchester.craigslist.org/pts/4602193522.html
Unaffiliated.
This post was last modified: 09-30-2014, 07:32 PM by CRD4x4.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
$900 BMW 6-Speed Manual trans, flywheel, clutch, shifter, driveshaft, etc. from M5
http://greenville.craigslist.org/pts/4664320922.html
No affiliation.
On my wish list: $500 dry sump oiling setup
http://winchester.craigslist.org/pts/4602193522.html
Unaffiliated.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
10-04-2014, 01:14 PM
#472
http://youngstown.craigslist.org/cto/4698992859.html
1985 MERCEDES BENZ 190e 16v COSWORTH - $1750 (Salineville, OH)
http://youngstown.craigslist.org/cto/4698992859.html
10-29-2014, 11:23 AM
#473
1994 (or 1996) Toyota Previa All-Trac (AWD) with "50,000km" JDM diesel motor!
http://washingtondc.craigslist.org/doc/c...96595.html
Absolutely no affiliation with seller!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
Weird $500 diesel project
1994 (or 1996) Toyota Previa All-Trac (AWD) with "50,000km" JDM diesel motor!
http://washingtondc.craigslist.org/doc/c...96595.html
Absolutely no affiliation with seller!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
11-01-2014, 09:20 AM
#474
http://spokane.craigslist.org/cto/4714586704.html
and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto
figured they'd make good parts cars for a manual conversion for a 300d
73 220d 500$. manual trans lots of rust hastn been started in a while. no association.
http://spokane.craigslist.org/cto/4714586704.html
and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto
figured they'd make good parts cars for a manual conversion for a 300d
11-04-2014, 11:51 AM
#475
(11-01-2014, 09:20 AM)Edian727 73 220d 500$. manual trans lots of rust hastn been started in a while. no association.Oh I saw those on there. He also has a 1960 190D for $500
http://spokane.craigslist.org/cto/4714586704.html
and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto
figured they'd make good parts cars for a manual conversion for a 300d
1980 Mercedes 300TD - Engine: 1983 OM617, W126 rear "blue" springs, turbo front springs, ALDA and rack limiter removed, boost @ 12psi. 2.5 inch exhaust off 6.9 diesel, straight pipe. Manual climate control. 2.88 diff.
mo1971fordcrew
11-04-2014, 11:51 AM #475(11-01-2014, 09:20 AM)Edian727 73 220d 500$. manual trans lots of rust hastn been started in a while. no association.Oh I saw those on there. He also has a 1960 190D for $500
http://spokane.craigslist.org/cto/4714586704.html
and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto
figured they'd make good parts cars for a manual conversion for a 300d
1980 Mercedes 300TD - Engine: 1983 OM617, W126 rear "blue" springs, turbo front springs, ALDA and rack limiter removed, boost @ 12psi. 2.5 inch exhaust off 6.9 diesel, straight pipe. Manual climate control. 2.88 diff.
11-23-2014, 07:05 PM
#476
(11-23-2014, 06:20 PM)CRD4x4 2004 E320 CDI engine - $2,000.00
http://reading.craigslist.org/pts/4736896290.html
No affiliation!
Austincarnut
11-23-2014, 07:05 PM #476I call bullshit! that's a om606, the guy said its not a 2004, but rather actually a 2005, which should make it a 648, somethings not adding up
(11-23-2014, 06:20 PM)CRD4x4 2004 E320 CDI engine - $2,000.00
http://reading.craigslist.org/pts/4736896290.html
No affiliation!
12-06-2014, 10:51 PM
#477
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
A little pricey..
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
02-05-2015, 09:18 PM
#478
'99 606 with 130k. $1500, someone get on that.
http://cnj.craigslist.org/pts/4874989803.html
'99 606 with 130k. $1500, someone get on that.
02-06-2015, 12:11 AM
#479
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.htmlwrong Hamilton,in the wrong country for me...
'99 606 with 130k. $1500, someone get on that.
other wise I would grab it as a donor for a w123 project i am chewing around in my head.
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.htmlwrong Hamilton,in the wrong country for me...
'99 606 with 130k. $1500, someone get on that.
other wise I would grab it as a donor for a w123 project i am chewing around in my head.
02-07-2015, 11:30 PM
#480
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html
'99 606 with 130k. $1500, someone get on that.
That's a really good deal. I'd jump on that if I wasn't on the other side of the country.
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html
'99 606 with 130k. $1500, someone get on that.
That's a really good deal. I'd jump on that if I wasn't on the other side of the country.
03-29-2015, 03:20 PM
#481
http://orangecounty.craigslist.org/cto/4910126417.html
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
03-29-2015, 03:20 PM #481WOW! I wish
http://orangecounty.craigslist.org/cto/4910126417.html
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
03-30-2015, 03:12 PM
#482
(03-29-2015, 03:20 PM)Captain America WOW! I wish
http://orangecounty.craigslist.org/cto/4910126417.html
Gahhhh what was it?? I MUST KNOW
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
(03-29-2015, 03:20 PM)Captain America WOW! I wish
http://orangecounty.craigslist.org/cto/4910126417.html
Gahhhh what was it?? I MUST KNOW
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
06-12-2015, 05:42 PM
#483
https://bland.is/til-solu/farartaeki/bil...l/2754179/
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
Ok. Not on craigslist, not really a MB and not on a land mass shared by 99.9% of us BUT this is a cool truck!! Ssangyong Korando 2.9 (OM602) with 5-speed manual & 4×4 for around $3,000 USD:
https://bland.is/til-solu/farartaeki/bil...l/2754179/
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
06-28-2015, 07:28 PM
#484
http://sandiego.craigslist.org/esd/cto/5097412899.html
U85 - 300TD Black Wagon, Non EGR exhaust manifold, W115 intake (SOLD)
87 - 300SDL Black, AMG 17" Wheels, Euro Headlights, #18 Head (FOR SALE)
SDL project for sale
http://sandiego.craigslist.org/esd/cto/5097412899.html
U85 - 300TD Black Wagon, Non EGR exhaust manifold, W115 intake (SOLD)
87 - 300SDL Black, AMG 17" Wheels, Euro Headlights, #18 Head (FOR SALE)
07-12-2015, 09:24 PM
#485
not sure if it's still there
http://burlington.craigslist.org/cto/5056077864.html
1987 300TDT
not sure if it's still there
http://burlington.craigslist.org/cto/5056077864.html
07-28-2015, 07:14 AM
#486
1987 Mazda B2200 "outlaw" **planning phase** Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans
1985 Mercedes 300D stock for now
This one is mine. http://atlanta.craigslist.org/nat/cto/5138681216.html
1987 Mazda B2200 "outlaw" **planning phase** Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans
1985 Mercedes 300D stock for now
07-28-2015, 06:02 PM
#487
http://atlanta.craigslist.org/atl/cto/5134099917.html
1987 Mazda B2200 "outlaw" **planning phase** Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans
1985 Mercedes 300D stock for now
This one is not mine
http://atlanta.craigslist.org/atl/cto/5134099917.html
1987 Mazda B2200 "outlaw" **planning phase** Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans
1985 Mercedes 300D stock for now
http://sfbay.craigslist.org/nby/cto/5145812869.html
This one is mine
08-24-2015, 07:37 PM
#489
https://washingtondc.craigslist.org/nva/...20574.html
Not mine...
I wish it had more info or pix...'74 diesel 4-speed manual $1,200 or trade
https://washingtondc.craigslist.org/nva/...20574.html
Not mine...
09-20-2015, 06:42 PM
#490
W116 I think. Looks like it's got a set of Pentas on it. Front air dam, rear spoiler, euro headlights. Euro bumpers? Auburn AL.
raysorenson
09-20-2015, 06:42 PM #490http://auburn.craigslist.org/pts/5181829310.html
W116 I think. Looks like it's got a set of Pentas on it. Front air dam, rear spoiler, euro headlights. Euro bumpers? Auburn AL.
09-20-2015, 09:26 PM
#491
i wouldnt call it CL but in the spokane valley pull and save theres a 83? 190d 601 and 5-speed. complete engine and transmission theres earlier today. dont have the cash or space for it figured some here might. they are cheap, 165 for a whole egine, 65 trans and somewhere near 30 for the clutch bs, and i think 20 or so for a 2-piece driveline.
ThEuNnAmEd1
Unregistered
10-03-2015, 12:47 PM
#492
http://columbus.craigslist.org/cto/5248451949.html
ThEuNnAmEd1
10-03-2015, 12:47 PM #492Thought I would post this on here. You guys will probably pick it apart, but its my diesel. Have at it.
http://columbus.craigslist.org/cto/5248451949.html
10-24-2015, 07:02 PM
#493
http://iowacity.craigslist.org/cto/5283624585.html
ak47is1337
10-24-2015, 07:02 PM #493OM606 turbo W210 $2000 @ iowa city
http://iowacity.craigslist.org/cto/5283624585.html
10-25-2015, 12:36 PM
#494
https://easternshore.craigslist.org/cto/5281850912.html
606 NA 98 E300 +/-160k for $1700 (suspension damage)
https://easternshore.craigslist.org/cto/5281850912.html
11-01-2015, 09:27 AM
#495
This one needs to catch a STD!!
https://washingtondc.craigslist.org/nva/...81989.html
Wow! $2500 1999 E55 bad head gasket! 125k miles
This one needs to catch a STD!!
https://washingtondc.craigslist.org/nva/...81989.html
11-05-2015, 01:21 PM
#496
https://phoenix.craigslist.org/nph/cto/5255323702.html
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
$1200 '98 E300 in Phoenix area with 150k miles and a "recently" replaced transmission... I'd be all over this if I had the cash
https://phoenix.craigslist.org/nph/cto/5255323702.html
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
01-12-2016, 08:09 PM
#498
http://loz.craigslist.org/cto/5399558446.html
Irony.cc
01-22-2016, 02:40 PM
#499
https://baltimore.craigslist.org/wto/5410726038.html
My main reason for posting this is because I hadn't heard of this B/W T50 5-speed before and it's got a removable bellhousing. I wonder if it'd hold the torque of a 617a.
https://baltimore.craigslist.org/wto/5410726038.html
04-30-2016, 10:18 AM
#500
Posting;
w201 190e 5 speed manual transmission - $950 (fremont / union city / newark)
717.432 GL76/27 from a 1993 190 2.6 Sportline SE
Transmission bolt pattern will fit mercedes engines; m102, m103, m104, m111, om601, om602 and om603. w201 and w124 chassis'.
Available parts are:
Flywheel
Transmission
Shifter
Linkage
Manual driveshaft front section
Full 5 speed swap on Craigslist for w201.
Posting;
w201 190e 5 speed manual transmission - $950 (fremont / union city / newark)
717.432 GL76/27 from a 1993 190 2.6 Sportline SE
Transmission bolt pattern will fit mercedes engines; m102, m103, m104, m111, om601, om602 and om603. w201 and w124 chassis'.
Available parts are:
Flywheel
Transmission
Shifter
Linkage
Manual driveshaft front section
Users browsing this thread:
78 Guest(s)
78 Guest(s)
Users browsing this thread:
78 Guest(s)
78 Guest(s)