W124 radiator dimensions.
W124 radiator dimensions.
10-05-2015, 03:17 PM
#1
Hopefully someone has a radiator out of their w124 and can measure the available space. I have a crack in the pass tank on one of mine and plan on upgrading to an AFCO welded aluminum one perhaps a dual pass. Anyway, if anyone can provide the dimensions of the available space it is greatly appreciated! I would just measure mine but they are both on base in a locked shop facility until tomorrow and I'd like to order a new one before then.
Josh
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
10-05-2015, 03:17 PM #1Hello all,
Hopefully someone has a radiator out of their w124 and can measure the available space. I have a crack in the pass tank on one of mine and plan on upgrading to an AFCO welded aluminum one perhaps a dual pass. Anyway, if anyone can provide the dimensions of the available space it is greatly appreciated! I would just measure mine but they are both on base in a locked shop facility until tomorrow and I'd like to order a new one before then.
Josh
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
10-05-2015, 11:45 PM
#2
They show it as 26" wide and 19" tall with 3" thickness which may be a little thick, we'll see. I am also hoping the inlet is close enough to just use the stock top hose and flip if 180*. I have a hunch that I will need to go take a look at available hoses once I measure the gap between outlet of the head and inlet of the radiator as IIRC the outlet of the head is offset to the left side.
This post was last modified: 10-06-2015, 08:32 AM by SurfRodder.
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
10-05-2015, 11:45 PM #2Well...just bit the bullet and ordered this one: http://www.summitracing.com/parts/afc-80125n
They show it as 26" wide and 19" tall with 3" thickness which may be a little thick, we'll see. I am also hoping the inlet is close enough to just use the stock top hose and flip if 180*. I have a hunch that I will need to go take a look at available hoses once I measure the gap between outlet of the head and inlet of the radiator as IIRC the outlet of the head is offset to the left side.
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)