STD Tuning Drivetrain C220CDI W204 716.656 fits an OM606?

C220CDI W204 716.656 fits an OM606?

C220CDI W204 716.656 fits an OM606?

 
  • 0 Vote(s) - 0 Average
 
Corkuin
Need more fuel..

8
12-02-2015, 10:16 AM #1
Hello I would like to know if a 716.656 gearbox fits on a OM606 Turbodiesel. The engine code is OM651.911.

What I could find is that only M102,M103,M104,M111,OM606,OM605,OM604,OM603,OM602,OM601 gearboxes fit but please let me know if the W204 C220CDI will also fit!

1944 army boat with 7.5mm PP diesel OM606. Planning to build a second 8mm engine for an old car..
Corkuin
12-02-2015, 10:16 AM #1

Hello I would like to know if a 716.656 gearbox fits on a OM606 Turbodiesel. The engine code is OM651.911.

What I could find is that only M102,M103,M104,M111,OM606,OM605,OM604,OM603,OM602,OM601 gearboxes fit but please let me know if the W204 C220CDI will also fit!


1944 army boat with 7.5mm PP diesel OM606. Planning to build a second 8mm engine for an old car..

Petar
7.5mm M pump

459
12-02-2015, 01:59 PM #2
I think the OM651 has a completely different bolt patternm, it probably won't fit. But i can't be sure.
Petar
12-02-2015, 01:59 PM #2

I think the OM651 has a completely different bolt patternm, it probably won't fit. But i can't be sure.

Corkuin
Need more fuel..

8
12-02-2015, 03:36 PM #3
Thanks, I was afraid for the same.
I also know a 716.631 from a W203 with a M271.921 engine. Would this make a chance?

Thanks!

1944 army boat with 7.5mm PP diesel OM606. Planning to build a second 8mm engine for an old car..
Corkuin
12-02-2015, 03:36 PM #3

Thanks, I was afraid for the same.
I also know a 716.631 from a W203 with a M271.921 engine. Would this make a chance?

Thanks!


1944 army boat with 7.5mm PP diesel OM606. Planning to build a second 8mm engine for an old car..

capflya
Dreaming of a VNT

309
12-04-2015, 10:13 PM #4
I think they fit still.. I want to say the bolt pattern is still the same on the CDI's as long as they are inline engines (up until '06-ish).

Swatmugga might know.. Not sure which box he's using but it's a 716 from a 220cdi

http://www.superturbodiesel.com/std/show...p?tid=5749



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
12-04-2015, 10:13 PM #4

I think they fit still.. I want to say the bolt pattern is still the same on the CDI's as long as they are inline engines (up until '06-ish).

Swatmugga might know.. Not sure which box he's using but it's a 716 from a 220cdi

http://www.superturbodiesel.com/std/show...p?tid=5749




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

Petar
7.5mm M pump

459
12-06-2015, 05:50 PM #5
(12-02-2015, 03:36 PM)Corkuin Thanks, I was afraid for the same.
I also know a 716.631 from a W203 with a M271.921 engine. Would this make a chance?

Thanks!
I don't know myself, but judging from photos on the internet  Tongue i think it should fit.
(12-04-2015, 10:13 PM)capflya I think they fit still.. I want to say the bolt pattern is still the same on the CDI's as long as they are inline engines (up until '06-ish).

Swatmugga might know.. Not sure which box he's using but it's a 716 from a 220cdi

http://www.superturbodiesel.com/std/show...p?tid=5749

Well the OM651 is made after '09 i think and it has the newer completely round bolt pattern like teh V6 cdi.
Petar
12-06-2015, 05:50 PM #5

(12-02-2015, 03:36 PM)Corkuin Thanks, I was afraid for the same.
I also know a 716.631 from a W203 with a M271.921 engine. Would this make a chance?

Thanks!
I don't know myself, but judging from photos on the internet  Tongue i think it should fit.
(12-04-2015, 10:13 PM)capflya I think they fit still.. I want to say the bolt pattern is still the same on the CDI's as long as they are inline engines (up until '06-ish).

Swatmugga might know.. Not sure which box he's using but it's a 716 from a 220cdi

http://www.superturbodiesel.com/std/show...p?tid=5749

Well the OM651 is made after '09 i think and it has the newer completely round bolt pattern like teh V6 cdi.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)