FS: New 240mm clutch and pressure plate for M103 flywheel
FS: New 240mm clutch and pressure plate for M103 flywheel
01-06-2016, 06:25 PM
#1
Any good clutch shop should be familiar with increasing the clamping force on Sachs pressure plates, which makes it a good option for those with high power motors.
I am asking 300$ shipped.
If you are interested or have any questions, please feel free to contact me.
Thank you for looking.
![[Image: 160106m103clutch1.jpg]](http://matejblahut.com/media/photo/buyselltrade/auto/drivetrain/160106m103clutch1.jpg)
![[Image: 160106m103clutch2.jpg]](http://matejblahut.com/media/photo/buyselltrade/auto/drivetrain/160106m103clutch2.jpg)
This post was last modified: 01-06-2016, 06:31 PM by Matej.
Irony.cc
This is a new clutch kit to be used with the M103 240mm single-mass flywheel. The kit arrived in a Centric box, featuring a Sachs pressure plate, Sachs stamped on the clutch hub along with a LuK sticker, and Valeo printed on the friction material.
Any good clutch shop should be familiar with increasing the clamping force on Sachs pressure plates, which makes it a good option for those with high power motors.
I am asking 300$ shipped.
If you are interested or have any questions, please feel free to contact me.
Thank you for looking.
Irony.cc
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)