om603 to om606 and keep cruise control working
om603 to om606 and keep cruise control working
PedroFerreira
01-24-2016, 08:50 PM #1someone know if is possible make the swap and keep cruise control working?
01-25-2016, 04:51 AM
#4
(01-24-2016, 09:46 PM)PedroFerreira is an w124
Have a look at Baldur's ECU, it does cruise with the electronic om606/Bosch pump.
https://controls.is/dsl1.html
The thread about it here:
http://www.superturbodiesel.com/std/show...p?tid=6975
Ive just bought.one not.fitted yet so can't comment on how well it works but no reason it shouldn't be fantastic!
Baldur is great at answering questions, very helpful indeed.
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
(01-24-2016, 09:46 PM)PedroFerreira is an w124
Have a look at Baldur's ECU, it does cruise with the electronic om606/Bosch pump.
https://controls.is/dsl1.html
The thread about it here:
http://www.superturbodiesel.com/std/show...p?tid=6975
Ive just bought.one not.fitted yet so can't comment on how well it works but no reason it shouldn't be fantastic!
Baldur is great at answering questions, very helpful indeed.
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
01-25-2016, 05:21 AM
#5
i belive there´s a second speed pick up in the pan , but u can swap the 603 pan in the 606 , like this u dont have to drill anything.
u can keep the flywheel for the 606 , or if it is auto works same .... u can use the convertor, is direct swap.
regards.
FD,
Powered by tractor fuel
Once u swap the 606 engine on that thing , u have to use the same pump , so all the functions in the car will be working.
i belive there´s a second speed pick up in the pan , but u can swap the 603 pan in the 606 , like this u dont have to drill anything.
u can keep the flywheel for the 606 , or if it is auto works same .... u can use the convertor, is direct swap.
regards.
FD,
Powered by tractor fuel
01-25-2016, 02:17 PM
#6
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
Sorry, i completely misunderstood your post!....
---
W639 Vito OM606 + 722.6 STD - in progress
Current progress: engine in, gearbox in, bumper bar modified to accept w210 radiator, audi electric fan, very tight squeeze, interior stripped out ready for new seats (w211) and custom dash with w211 clocks controlled by arduino with split fuel gauge covering main tank and auxiliary for Veg Oil ...
- DSL1 ECU for Electronic OM606 Pump (currently fitting wiring)
Next; 722.6 Controller, HX40 with homemade manifold, Air-to-water intercooler, homemade exhaust, MOT.... One day!
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)