STD Other Projects Estonian style w201 2,5D

Estonian style w201 2,5D

Estonian style w201 2,5D

 
  • 2 Vote(s) - 5 Average
 
artuur
Naturally-aspirated

17
12-04-2012, 03:25 PM #1
Hei
Here are some pictures of my w201 om 605 build.
Pump is going do be 7,5 mm 180cc dieselmeken,i hope do get it back this week Smile
turbo: master power mpr 545 #14 housing.
wastgate : turbosmart
Itercooler will be custom made, exhaust mainfold custom made.

cant ad pictures.
maybe someone can help
This post was last modified: 12-04-2012, 04:42 PM by artuur.
Attached Files
Image(s)
                           
artuur
12-04-2012, 03:25 PM #1

Hei
Here are some pictures of my w201 om 605 build.
Pump is going do be 7,5 mm 180cc dieselmeken,i hope do get it back this week Smile
turbo: master power mpr 545 #14 housing.
wastgate : turbosmart
Itercooler will be custom made, exhaust mainfold custom made.


cant ad pictures.
maybe someone can help

Attached Files
Image(s)
                           

raidaru
TA 0301

65
12-04-2012, 04:52 PM #2
This project seems promising, nice work so far! I'm curious to see it on the road and dyno Wink

lost in the diesel universe.............
raidaru
12-04-2012, 04:52 PM #2

This project seems promising, nice work so far! I'm curious to see it on the road and dyno Wink


lost in the diesel universe.............

Ksteen2
Holset

304
12-05-2012, 04:02 AM #3
keep us posted on this prodsject, its promising Wink
nice exhaust manifold too Wink
Ksteen2
12-05-2012, 04:02 AM #3

keep us posted on this prodsject, its promising Wink
nice exhaust manifold too Wink

artuur
Naturally-aspirated

17
12-05-2012, 03:08 PM #4
some new pictures and progress
Downpipe 3,5 inches
other pipes 3 inches
new seats Cool
Here is ready exhaust mainfold
https://www.facebook.com/photo.php?fbid=...=3&theater
Company how will makse the parts is https://www.facebook.com/JouJaam
There you can see allmost ready intercooler allsoo.
Attached Files
Image(s)
               
artuur
12-05-2012, 03:08 PM #4

some new pictures and progress
Downpipe 3,5 inches
other pipes 3 inches
new seats Cool
Here is ready exhaust mainfold
https://www.facebook.com/photo.php?fbid=...=3&theater
Company how will makse the parts is https://www.facebook.com/JouJaam
There you can see allmost ready intercooler allsoo.

Attached Files
Image(s)
               

Captain America
Boostin' & Roostin'

2,221
12-06-2012, 01:19 AM #5
I like the look of the seats!


1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

Captain America
12-06-2012, 01:19 AM #5

I like the look of the seats!



1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

m2rkz
K26-2

40
12-06-2012, 05:24 PM #6
Where is one cylinder?
m2rkz
12-06-2012, 05:24 PM #6

Where is one cylinder?

artuur
Naturally-aspirated

17
12-08-2012, 12:03 PM #7
(12-06-2012, 05:24 PM)m2rkz Where is one cylinder?

five is enough when you have light car Big Grin
artuur
12-08-2012, 12:03 PM #7

(12-06-2012, 05:24 PM)m2rkz Where is one cylinder?

five is enough when you have light car Big Grin

artuur
Naturally-aspirated

17
12-10-2012, 03:55 PM #8
Hei guys.
new pics from exhaust system and oil return pipes.
Probably will see the intercooler progress this week.
This post was last modified: 12-10-2012, 04:04 PM by artuur.
Attached Files
Image(s)
                               
artuur
12-10-2012, 03:55 PM #8

Hei guys.
new pics from exhaust system and oil return pipes.
Probably will see the intercooler progress this week.

Attached Files
Image(s)
                               

artuur
Naturally-aspirated

17
12-28-2012, 05:10 PM #9
hello
reiceved the pump from dieselmeken, cooler and exhaust is ready, started the car with no problem.
Pump is running good thanks do dieselmeken Smile
but now i have some minor issues do fix.
have nice end of the year everybody Cool
the next pictures will tell everything Confused
Attached Files
Image(s)
                           
artuur
12-28-2012, 05:10 PM #9

hello
reiceved the pump from dieselmeken, cooler and exhaust is ready, started the car with no problem.
Pump is running good thanks do dieselmeken Smile
but now i have some minor issues do fix.
have nice end of the year everybody Cool
the next pictures will tell everything Confused

Attached Files
Image(s)
                           

dieselmeken
Holset

407
12-29-2012, 07:19 AM #10
ops! What happend? First pull or did it go oildry?
dieselmeken
12-29-2012, 07:19 AM #10

ops! What happend? First pull or did it go oildry?

raidaru
TA 0301

65
12-29-2012, 09:23 AM #11
(12-29-2012, 07:19 AM)dieselmeken ops! What happend? First pull or did it go oildry?
Your pump gives to much powa, no good , break engine Smile)))))))Big Grin

lost in the diesel universe.............
raidaru
12-29-2012, 09:23 AM #11

(12-29-2012, 07:19 AM)dieselmeken ops! What happend? First pull or did it go oildry?
Your pump gives to much powa, no good , break engine Smile)))))))Big Grin


lost in the diesel universe.............

artuur
Naturally-aspirated

17
12-29-2012, 09:53 AM #12
hei

the connecting rod bolts where like cut of,
i know that the engine is once rebuild and the bolts where old.
But its not a problem, i have one spare engine.
The new engine is getting forged rods and some other tuning parts.
Dieselmeken pump with 130cc worked very good, the first run and clutch disc was gone Smile
The roads in Estonia are snowy and we have some spare time do make the necessary repairs.
In february will try again.
Ill update if something interesting is going to happen.
cheersBig Grin
artuur
12-29-2012, 09:53 AM #12

hei

the connecting rod bolts where like cut of,
i know that the engine is once rebuild and the bolts where old.
But its not a problem, i have one spare engine.
The new engine is getting forged rods and some other tuning parts.
Dieselmeken pump with 130cc worked very good, the first run and clutch disc was gone Smile
The roads in Estonia are snowy and we have some spare time do make the necessary repairs.
In february will try again.
Ill update if something interesting is going to happen.
cheersBig Grin

erling66
SuperDieselVan

294
12-29-2012, 11:31 AM #13
Wow that was bad, but I like your calm attitudeSmile Maybe the mechanic that rebuild the engine wasn't the best?Confused
Hopefully we will see some better results next time. Keep us updated with your great project

HuhCoolTongue
erling66
12-29-2012, 11:31 AM #13

Wow that was bad, but I like your calm attitudeSmile Maybe the mechanic that rebuild the engine wasn't the best?Confused
Hopefully we will see some better results next time. Keep us updated with your great project


HuhCoolTongue

artuur
Naturally-aspirated

17
02-11-2013, 01:56 PM #14
hello people
i havent been here some time.
Now is some progress with my new engine.
crankshaft is polished and balanced.
Pistons will be old but they are in very good condition.
connecting rod bolts will be new.
All new gaskets, new crankshaft bearings.
tuning valve springs, valve tappets, new chain and tensioner, new water pump,new cylinder head bolts and lots of more useful stuff.
Engine block is very good, had 200000 km on spido.
Everything is cleaned and looks nice.
Probably will hear the voice in march because i have to go on vacation for some nice weather in Egypt.
some pics allsoo.
Regards
Artur
Attached Files
Image(s)
                               
artuur
02-11-2013, 01:56 PM #14

hello people
i havent been here some time.
Now is some progress with my new engine.
crankshaft is polished and balanced.
Pistons will be old but they are in very good condition.
connecting rod bolts will be new.
All new gaskets, new crankshaft bearings.
tuning valve springs, valve tappets, new chain and tensioner, new water pump,new cylinder head bolts and lots of more useful stuff.
Engine block is very good, had 200000 km on spido.
Everything is cleaned and looks nice.
Probably will hear the voice in march because i have to go on vacation for some nice weather in Egypt.
some pics allsoo.
Regards
Artur

Attached Files
Image(s)
                               

Simpler=Better
PORTED HEAD

2,127
02-11-2013, 03:24 PM #15
Looks like fun Smile

Glad you're rebuilding it stronger Smile

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-11-2013, 03:24 PM #15

Looks like fun Smile

Glad you're rebuilding it stronger Smile


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Ksteen2
Holset

304
02-13-2013, 08:18 AM #16
have you got H-profil or forged rods?
or just standard? ;p
Ksteen2
02-13-2013, 08:18 AM #16

have you got H-profil or forged rods?
or just standard? ;p

artuur
Naturally-aspirated

17
02-13-2013, 04:22 PM #17
(02-13-2013, 08:18 AM)Ksteen2 have you got H-profil or forged rods?
or just standard? ;p

Hei
rods will be standard Smile
hopefully they will stand the pressure.
if not then i know what should i do Big Grin
artuur
02-13-2013, 04:22 PM #17

(02-13-2013, 08:18 AM)Ksteen2 have you got H-profil or forged rods?
or just standard? ;p

Hei
rods will be standard Smile
hopefully they will stand the pressure.
if not then i know what should i do Big Grin

EDH_Performance
Holset

537
02-13-2013, 04:48 PM #18
Uuuu, good to see that you are upgrading your engine with Norwegian parts^^
EDH_Performance
02-13-2013, 04:48 PM #18

Uuuu, good to see that you are upgrading your engine with Norwegian parts^^

TurboWalt
K26-2

33
02-14-2013, 06:56 AM #19
Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt
TurboWalt
02-14-2013, 06:56 AM #19

Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt

EDH_Performance
Holset

537
02-14-2013, 01:07 PM #20
(02-14-2013, 06:56 AM)TurboWalt Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt

The block is the same on the outside, so just use the motormounts that you haveWink
EDH_Performance
02-14-2013, 01:07 PM #20

(02-14-2013, 06:56 AM)TurboWalt Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt

The block is the same on the outside, so just use the motormounts that you haveWink

TurboWalt
K26-2

33
02-14-2013, 04:29 PM #21
(02-14-2013, 01:07 PM)EDH_Performance
(02-14-2013, 06:56 AM)TurboWalt Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt

The block is the same on the outside, so just use the motormounts that you haveWink

Thats great news. Now to find a source for a 605? Anyone know if a 722.6 will fit in a W201?
TurboWalt
02-14-2013, 04:29 PM #21

(02-14-2013, 01:07 PM)EDH_Performance
(02-14-2013, 06:56 AM)TurboWalt Artuur,

I really like your build. I have an OM602 Turbo W201 that I want to change the pump and turbo on. What did you use for motor mounts to swap the OM605 into your W201?

Cheers, Walt

The block is the same on the outside, so just use the motormounts that you haveWink

Thats great news. Now to find a source for a 605? Anyone know if a 722.6 will fit in a W201?

TheDon
606 Power!!

247
03-17-2013, 06:53 AM #22
Artuur,

What are you using to control the pump? I only see a throttle cable going to it.
TheDon
03-17-2013, 06:53 AM #22

Artuur,

What are you using to control the pump? I only see a throttle cable going to it.

artuur
Naturally-aspirated

17
03-24-2013, 02:18 PM #23
Helllo
im using only one cable and self made fastenings.
Probalbly next week get some new pictures, i have not had time do bulid the car.
hopefully the snow will go away and i do not have do fun with snowmobile.


What are you using to control the pump? I only see a throttle cable going to it.
[/quote]

one thing more.
I will use gearbox from bmw e34 535 getrag 260
This post was last modified: 03-24-2013, 02:20 PM by artuur.
artuur
03-24-2013, 02:18 PM #23

Helllo
im using only one cable and self made fastenings.
Probalbly next week get some new pictures, i have not had time do bulid the car.
hopefully the snow will go away and i do not have do fun with snowmobile.


What are you using to control the pump? I only see a throttle cable going to it.
[/quote]


one thing more.
I will use gearbox from bmw e34 535 getrag 260

orion
K26-2

39
06-14-2013, 02:39 PM #24
Great Projekt, i hope you give us more informations about the performance of the engine next time.
Is the intake manifold stock or an prepared part?
This post was last modified: 06-14-2013, 03:35 PM by orion.
orion
06-14-2013, 02:39 PM #24

Great Projekt, i hope you give us more informations about the performance of the engine next time.
Is the intake manifold stock or an prepared part?

artuur
Naturally-aspirated

17
02-20-2016, 09:12 AM #25
Hey guys.
Now the car is ready and i dont see point to own it if i dont use.
So you can buy it.
Car is loacated in Estonia
here are adds
Estonian: http://www.auto24.ee/kasutatud/auto.php?...rhash=51e3
Finland : http://www.nettiauto.com/mercedes-benz/190/7837439
artuur
02-20-2016, 09:12 AM #25

Hey guys.
Now the car is ready and i dont see point to own it if i dont use.
So you can buy it.
Car is loacated in Estonia
here are adds
Estonian: http://www.auto24.ee/kasutatud/auto.php?...rhash=51e3
Finland : http://www.nettiauto.com/mercedes-benz/190/7837439

 
  • 2 Vote(s) - 5 Average
Users browsing this thread:
 7 Guest(s)
Users browsing this thread:
 7 Guest(s)