STD Tuning Engine OM60x rod dimensions

OM60x rod dimensions

OM60x rod dimensions

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
baldur
Website Find
Fast

509
02-23-2016, 06:40 AM #1
Reply
Reply
I'm rebuilding an OM662 and they have been known to stretch the rods beyond their usable limit before breaking. These appear to have 145mm long rods compared to the 149mm long rods on the OM602, as well as a 26mm wrist pin.
I'm wondering if there are any other beefier rods available and where to source them from, possibly from the direct injection OM602 2.9?
Baldur Gislason

baldur
02-23-2016, 06:40 AM #1

I'm rebuilding an OM662 and they have been known to stretch the rods beyond their usable limit before breaking. These appear to have 145mm long rods compared to the 149mm long rods on the OM602, as well as a 26mm wrist pin.
I'm wondering if there are any other beefier rods available and where to source them from, possibly from the direct injection OM602 2.9?

Baldur Gislason

Reply
Reply
barrote
Find
Superturbo

1,627
02-23-2016, 02:32 PM #2
Reply
Reply
Don´t know the size... did not bother to measure.... if it helps

   

u can consider the OM611/2/3 OM646/7/8 Rod,  the wrist pin in this is 30mm  if u want let me now i´ll post a pic too.
All is about the piston u want to use....

Regards
This post was last modified: 02-23-2016, 02:42 PM by barrote.
FD,
Powered by tractor fuel
barrote
02-23-2016, 02:32 PM #2

Don´t know the size... did not bother to measure.... if it helps

   

u can consider the OM611/2/3 OM646/7/8 Rod,  the wrist pin in this is 30mm  if u want let me now i´ll post a pic too.
All is about the piston u want to use....

Regards

FD,
Powered by tractor fuel

Reply
Reply
baldur
Website Find
Fast

509
02-23-2016, 05:57 PM #3
Reply
Reply
Yes the rod pictured is the right length and looks like it has a 28mm pin. The 662 piston has a 26mm pin.
I want to use any piston that works with the 2 valve IDI head and the 89mm bore of the 2.9, although it would be nice to swap to a 4 valve piston and OM605 head.
Baldur Gislason

baldur
02-23-2016, 05:57 PM #3

Yes the rod pictured is the right length and looks like it has a 28mm pin. The 662 piston has a 26mm pin.
I want to use any piston that works with the 2 valve IDI head and the 89mm bore of the 2.9, although it would be nice to swap to a 4 valve piston and OM605 head.

Baldur Gislason

Reply
Reply
barrote
Find
Superturbo

1,627
02-24-2016, 09:29 AM #4
Reply
Reply
OM 601 2.3 TD found in sprinters and vitos have that 89 with the 28mm and is 2 valve as the 662.
89mm 4 valve piston is the 604 2.2 , the wrist pin is 26 so compatible with your rods and 4 valve head Wink
regards
FD,
Powered by tractor fuel
barrote
02-24-2016, 09:29 AM #4

OM 601 2.3 TD found in sprinters and vitos have that 89 with the 28mm and is 2 valve as the 662.
89mm 4 valve piston is the 604 2.2 , the wrist pin is 26 so compatible with your rods and 4 valve head Wink
regards

FD,
Powered by tractor fuel

Reply
Reply
tgg416
Find
K26-2

38
02-24-2016, 03:42 PM #5
Reply
Reply
Here you have diffrent to pick from :
Price for one is 1200Skr a piece, thats about 135$

http://www.acm-ab.se/vevstake-spm-h-profil/298
Gwagen 460, om606.962. 722.6 Ole Fejer controller++
Gwagen 463, shitty 603,,,,at the moment,,,
Gwagen 463, 270cdi
tgg416
02-24-2016, 03:42 PM #5

Here you have diffrent to pick from :
Price for one is 1200Skr a piece, thats about 135$

http://www.acm-ab.se/vevstake-spm-h-profil/298

Gwagen 460, om606.962. 722.6 Ole Fejer controller++
Gwagen 463, shitty 603,,,,at the moment,,,
Gwagen 463, 270cdi

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)