Re: 4-wheel SLS
Re: 4-wheel SLS
- maybe teutonic engineers put it in the too-hardt basket, but it could be an interesting project...Cheers
Graham
Hi, all. It may be a dumb question, but I'm wondering if anyone has experimented with putting SLS on the front end of a W123, too. If it makes such a great difference to the rear, could it work for all 4 wheels? I remember driving Citroens back when, and the hydro-pneumatique suspension was self-levelling, active (corner levelling), and manually adjustable for height. Bit quirky, but that's Citroens - maybe teutonic engineers put it in the too-hardt basket, but it could be an interesting project...
Cheers
Graham
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
I was interested in doing this too at one stage. The 6.9 W116 had it on all fours and so did some 190s I believe. I was wondering if (or how it would compare to) air bag suspension kits, which to me would be hell of a lot cheaper to do than say the W109 factory air bag system and the $$$ that costs in parts.
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
I have only seen one car so equipped here. It went through one of the high-end Los Angleles dealers on eBay many years ago. It was a black sedan and appeared to be NA spec.
I have no idea if a front SLS setup could be adapted to the existing mount setup or if mods or additional parts would be required.
This was actually available as a factory option on w123s, though it's extremely rare and usually seen in Europe.
I have only seen one car so equipped here. It went through one of the high-end Los Angleles dealers on eBay many years ago. It was a black sedan and appeared to be NA spec.
I have no idea if a front SLS setup could be adapted to the existing mount setup or if mods or additional parts would be required.
1 Guest(s)
1 Guest(s)