Mechanical pump WANTED
Mechanical pump WANTED
05-11-2016, 03:15 PM
#1
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
Hi all,
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
05-11-2016, 03:48 PM
#3
(05-11-2016, 03:15 PM)190Gilly Hi all,
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
For clarification, which injection pump are you looking for? 5 cy vs 6 cy?
Also, does your getrag 5 speed have a removable bellhousing or one piece case?
(05-11-2016, 03:15 PM)190Gilly Hi all,
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
For clarification, which injection pump are you looking for? 5 cy vs 6 cy?
Also, does your getrag 5 speed have a removable bellhousing or one piece case?
05-11-2016, 04:32 PM
#4
(05-11-2016, 03:48 PM)CRD4x4(05-11-2016, 03:15 PM)190Gilly Hi all,
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
For clarification, which injection pump are you looking for? 5 cy vs 6 cy?
Also, does your getrag 5 speed have a removable bellhousing or one piece case?
Apologies, I'm looking for a 6 cylinder pump for my om606 turbo.
The Getrag box is Mercedes and the bell housing is all one piece.
Any questions, please do ask!
Cheers
(05-11-2016, 03:48 PM)CRD4x4(05-11-2016, 03:15 PM)190Gilly Hi all,
As above, I'm after a mechanical pump for my project. I'd like a standard pump at present, the plan is to get my 6mm elements in there, and get the engine swap done before I go silly. £310 + vat from dieselpumpuk is a little steep for my pockets!
I also have a Getrag 5 speed box with linkages and a shifter to p/x if anyone is up for a deal.
Thanks!
For clarification, which injection pump are you looking for? 5 cy vs 6 cy?
Also, does your getrag 5 speed have a removable bellhousing or one piece case?
Apologies, I'm looking for a 6 cylinder pump for my om606 turbo.
The Getrag box is Mercedes and the bell housing is all one piece.
Any questions, please do ask!
Cheers
06-02-2016, 01:02 PM
#8
http://www.superturbodiesel.com/std/show...p?tid=7238
This post was last modified: 06-02-2016, 01:03 PM by Hario'.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Ask this guy to make an eBay listing for you to buy though?
http://www.superturbodiesel.com/std/show...p?tid=7238
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)