Best 603 pump to modify?
Best 603 pump to modify?
I'm new here, and am going to be "superpump"-ing a 603 pump, for use in an OM606-- with some help from Sweden!
My question in purchasing the pump to be modified, is if there is a specific year or model of pump I should look for, that is considered the best?
Since cost is basically the same, why not purchase the one with the best features, or greatest durability, compared to the others?
Or is it all the same, once they get the larger elements?
Thanks so much!
Hey All,
I'm new here, and am going to be "superpump"-ing a 603 pump, for use in an OM606-- with some help from Sweden!
My question in purchasing the pump to be modified, is if there is a specific year or model of pump I should look for, that is considered the best?
Since cost is basically the same, why not purchase the one with the best features, or greatest durability, compared to the others?
Or is it all the same, once they get the larger elements?
Thanks so much!
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
RS174 or above for om603 pump if u want 8mm element i heard from some pump builders.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
50harleyrider
05-25-2016, 05:03 AM #3What horsepower are you looking for? I let Dieselmeken supply the pump and that way I knew I getting the best bang for my $. PM me- I might have some stuff you want.
(05-25-2016, 05:03 AM)50harleyrider What horsepower are you looking for? I let Dieselmeken supply the pump and that way I knew I getting the best bang for my $. PM me- I might have some stuff you want.
I would recommend a Herlevi pump. Had a Dieselmeken last year. But if you dont want to put all the money into the pump go for Dieselmeken.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
(05-25-2016, 05:03 AM)50harleyrider What horsepower are you looking for? I let Dieselmeken supply the pump and that way I knew I getting the best bang for my $. PM me- I might have some stuff you want.
I would recommend a Herlevi pump. Had a Dieselmeken last year. But if you dont want to put all the money into the pump go for Dieselmeken.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
-PES 6 M55 C320 RS175-1, old sections was replaced by 6mm sections
-PES 6 M55 C 320 RS181
I'd like to install 7,5mm sections. One off this pump will go to om606 offroad car with standard turbo, another one will go to car with holset h1c, or bigger turbo
.
Mercedes W123 240D (om616->om606)
Audi A6 C4 2,8 Quattro (AAH)
EX Audi 80 Competition
EX Ford Scorpio 2,9 4x4
Hey all, which ip would be better to modify:
-PES 6 M55 C320 RS175-1, old sections was replaced by 6mm sections
-PES 6 M55 C 320 RS181
I'd like to install 7,5mm sections. One off this pump will go to om606 offroad car with standard turbo, another one will go to car with holset h1c, or bigger turbo .
Mercedes W123 240D (om616->om606)
Audi A6 C4 2,8 Quattro (AAH)
EX Audi 80 Competition
EX Ford Scorpio 2,9 4x4
(05-25-2016, 05:03 AM)50harleyrider What horsepower are you looking for? I let Dieselmeken supply the pump and that way I knew I getting the best bang for my $. PM me- I might have some stuff you want.
I'm not looking for a black smoke demon, only for around 300hp, so was going to go with the 7.5mm elements.
And I would have let Dieselmeken supply the pump, but he is all out right now!
(05-25-2016, 05:03 AM)50harleyrider What horsepower are you looking for? I let Dieselmeken supply the pump and that way I knew I getting the best bang for my $. PM me- I might have some stuff you want.
I'm not looking for a black smoke demon, only for around 300hp, so was going to go with the 7.5mm elements.
And I would have let Dieselmeken supply the pump, but he is all out right now!
5 Guest(s)
5 Guest(s)