Om601 what mpg to accept?
Om601 what mpg to accept?
08-15-2016, 03:21 PM
#1
Wanted a cheap car, but how low could i accept the mpg to be?
And offcourse, with original dieselpump, and injectors, how mush power can i accept with a turbo
?I wondering about an turbo and wants 10kg /hp (1000kg-100hp)
Just bought a w201 withj a om601 engine.
Wanted a cheap car, but how low could i accept the mpg to be?
And offcourse, with original dieselpump, and injectors, how mush power can i accept with a turbo?
I wondering about an turbo and wants 10kg /hp (1000kg-100hp)
08-16-2016, 01:46 AM
#2
(08-15-2016, 03:21 PM)Jonas94 Just bought a w201 withj a om601 engine.
Wanted a cheap car, but how low could i accept the mpg to be?
And offcourse, with original dieselpump, and injectors, how mush power can i accept with a turbo
I wondering about an turbo and wants 10kg /hp (1000kg-100hp)
The ones i have had have ranged between 5-6liters/per 100km.
My om601 with STT Turbo makes 91hp.
You can fit a Vito 6mm turbo pump into a om601 as i understand. I have in my mind to try it later.
This post was last modified: 08-16-2016, 01:49 AM by EvoPeter.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
(08-15-2016, 03:21 PM)Jonas94 Just bought a w201 withj a om601 engine.
Wanted a cheap car, but how low could i accept the mpg to be?
And offcourse, with original dieselpump, and injectors, how mush power can i accept with a turbo
I wondering about an turbo and wants 10kg /hp (1000kg-100hp)
The ones i have had have ranged between 5-6liters/per 100km.
My om601 with STT Turbo makes 91hp.
You can fit a Vito 6mm turbo pump into a om601 as i understand. I have in my mind to try it later.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
08-20-2016, 12:28 PM
#4
(08-20-2016, 08:22 AM)Jonas94 i drove it 210km and got 0,59liter/10km
So i gues it is oki
What should the nozzle pressure be on this engine?
115bar.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
(08-20-2016, 08:22 AM)Jonas94 i drove it 210km and got 0,59liter/10km
So i gues it is oki
What should the nozzle pressure be on this engine?
115bar.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
08-23-2016, 02:37 PM
#5
about 80cc in the 6 mil elements!!!, just plug and play...
There´s a 601 D23, wich was turboed for comercial vehicles , u can borrow collectors and the head assy, a regular 601 D20 or D22, uses a diff head assy. A few mods have to be done to make it chew a superpump..... but nothing hard ...
FD,
Powered by tractor fuel
Got the right pump for u!!!
about 80cc in the 6 mil elements!!!, just plug and play...
There´s a 601 D23, wich was turboed for comercial vehicles , u can borrow collectors and the head assy, a regular 601 D20 or D22, uses a diff head assy. A few mods have to be done to make it chew a superpump..... but nothing hard ...
FD,
Powered by tractor fuel
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)