fuel line size
fuel line size
08-17-2016, 11:43 PM
#2
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Don't know what engine you're talking about but if it's a 617 (which most 'muricans seem to have) try slipping 5/16" over the barbs but leave the clear hose still on the barb.
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
08-18-2016, 01:34 AM
#3
(08-17-2016, 10:46 PM)yota4life What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.
They are 6mm, I heat up the banjo fitting with a heat gun and push the tubing on and use a pex tubing crimp clamp. Works great and is tight.
This post was last modified: 08-18-2016, 01:37 AM by zeeman.
Attached Files
Image(s)(08-17-2016, 10:46 PM)yota4life What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.
They are 6mm, I heat up the banjo fitting with a heat gun and push the tubing on and use a pex tubing crimp clamp. Works great and is tight.
Attached Files
Image(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)