MAP sensor linear- need some help
MAP sensor linear- need some help
Hey guys,
I got a little problem, I just put in my OM612 E-class gt2359 turbo and C30 AMG injectors and bought A0071530028 MAP sensor to tune my ecu, but after all my tuner used old 1.5bar MAP because he couldn't find something like "linear" for the new one, I don't really know what it is, but I would like someone to enlighten me, and help. Greetings from Poland
Hi!
What is meant is this:
And what you need is a sensor that does the same, but then not from low pressur to a little more pressure, but to 4 bar
http://www.bmotorsports.com/shop/product...ts_id/1773
I hope this helps
Kind regards,
Evgeniy
Google does not show it so it must be some other non popular sensor..but I suppose it is 4bar sensor. Then linearisation in EDC15 is 4x1 map and values follows as this:
mV: 98 499 4501 4902
mBar: 289 500 4000 4000
Thanks for your answers guys, now I see what it all is about my tuner will try to figure out this, or just use other sensor, hope everything will go right ^^ thanks for your time
(08-25-2016, 01:45 PM)starynovy Google does not show it so it must be some other non popular sensor..but I suppose it is 4bar sensor. Then linearisation in EDC15 is 4x1 map and values follows as this:
mV: 98 499 4501 4902
mBar: 289 500 4000 4000
(08-25-2016, 01:45 PM)starynovy Google does not show it so it must be some other non popular sensor..but I suppose it is 4bar sensor. Then linearisation in EDC15 is 4x1 map and values follows as this:
mV: 98 499 4501 4902
mBar: 289 500 4000 4000
Because it is only linear in that region in the middle. Also it measures maximum pressure at 4.5V so stating that at 5V it is still 4000mBar is correct too.