OM648 rear block transmission bolt pattern same as OM606?
OM648 rear block transmission bolt pattern same as OM606?
08-26-2016, 06:01 AM
#1
Can anyone confirm this?
The bolt pattern for the oil pans is slightly different, but if the OM648 and OM606 blocks have the same bolt pattern, I should be able to use an OM648 transmission (on an OM606 engine with the OM648 pan) without modification.
Thanks!
Hey, so I'm going to put an OM648 oil pan on my OM606 to have the rear sump, and it seems from photos that the transmission bolt pattern on the rear of the OM648 block is the same as the OM606?
Can anyone confirm this?
The bolt pattern for the oil pans is slightly different, but if the OM648 and OM606 blocks have the same bolt pattern, I should be able to use an OM648 transmission (on an OM606 engine with the OM648 pan) without modification.
Thanks!
08-26-2016, 07:44 AM
#2
whipplem104
08-26-2016, 07:44 AM #2The pan bolts on the engine but the bolt pattern for the transmission is completely different.
08-28-2016, 04:36 AM
#3
(08-26-2016, 07:44 AM)whipplem104 The pan bolts on the engine but the bolt pattern for the transmission is completely different.
It is? I tought it was the V6 that had the different bolt pattern.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
(08-26-2016, 07:44 AM)whipplem104 The pan bolts on the engine but the bolt pattern for the transmission is completely different.
It is? I tought it was the V6 that had the different bolt pattern.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
09-01-2016, 07:08 PM
#5
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
Strange. So the om648 have different pattern from the om612 engine?
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
09-02-2016, 01:39 AM
#6
(09-01-2016, 07:08 PM)EvoPeter Strange. So the om648 have different pattern from the om612 engine?
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
OM 611/612/613 are the same generation but 613/648 has different and unique bolt pattern from another. 611/612 is the same as 606.
This post was last modified: 09-02-2016, 01:40 AM by erx.
(09-01-2016, 07:08 PM)EvoPeter Strange. So the om648 have different pattern from the om612 engine?
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
OM 611/612/613 are the same generation but 613/648 has different and unique bolt pattern from another. 611/612 is the same as 606.
09-02-2016, 03:25 AM
#7
(09-02-2016, 01:39 AM)erx(09-01-2016, 07:08 PM)EvoPeter Strange. So the om648 have different pattern from the om612 engine?
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
OM 611/612/613 are the same generation but 613/648 has different and unique bolt pattern from another. 611/612 is the same as 606.
Ok. Good info.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
(09-02-2016, 01:39 AM)erx(09-01-2016, 07:08 PM)EvoPeter Strange. So the om648 have different pattern from the om612 engine?
Cuz i have a gearbox from a 270cdi on my om605. The bolt pattern line up but the gearbox are sticking out around the block.
OM 611/612/613 are the same generation but 613/648 has different and unique bolt pattern from another. 611/612 is the same as 606.
Ok. Good info.
-----------------------------------------------------------------------------------------------------------------------------
Mercedes 190 -92, om605 Stroker 2.75L, Dieselmeken 7,5mm (160cc) EDC with Baldur DSL1 ECU, Garrett GTX3576R A/R 1.06 without WG, SMF, 716.661 (SG-S370/6) Gearbox
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)