om603 (300d) max cc of original lift pump
om603 (300d) max cc of original lift pump
09-27-2016, 06:06 PM
#1
PedroFerreira
09-27-2016, 06:06 PM #1hello someone can tell me what is the max power or max cc that original lift pump from 300d n/a can make?
09-27-2016, 06:27 PM
#2
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Lift pump or injection pump? The lift pump only supplies the IP and doesn't make power as such...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
09-27-2016, 09:13 PM
#3
Funny 606 na puts out about the same for 136 hp?
Anyway 603 turbo was about 50cc and max was close to 60-65, I would think na pump could make the same but was just turned down very conservatively.
This post was last modified: 09-27-2016, 09:16 PM by awsrock.
IP probably puts out about 38cc to make 113 hp. This is just an estimate though..
Funny 606 na puts out about the same for 136 hp?
Anyway 603 turbo was about 50cc and max was close to 60-65, I would think na pump could make the same but was just turned down very conservatively.
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)