STD Tuning Engine W124 project

W124 project

W124 project

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
jim8280
Find
Naturally-aspirated

5
03-05-2017, 07:26 AM #1
Reply
Reply
Hello everyone im about to drop my 606 into my 220ce but i've hit a problem my 606 has the bowl on the front of the sump which will hit the anti roll bar any ideas if another sump will bolt on or any other way around it i dont really want to start cutting and shutting the alloy sump 
Any comments welcome 

Many Thanks

Jim
jim8280
03-05-2017, 07:26 AM #1

Hello everyone im about to drop my 606 into my 220ce but i've hit a problem my 606 has the bowl on the front of the sump which will hit the anti roll bar any ideas if another sump will bolt on or any other way around it i dont really want to start cutting and shutting the alloy sump 
Any comments welcome 

Many Thanks

Jim

Reply
Reply
Petar
Find
7.5mm M pump

459
03-05-2017, 07:45 AM #2
Reply
Reply
OM603 sump or w124 V8 swaybar either will fix the problem. As far as i remember you also need the om603 oil pump if you use the 603 sump. The W124 OM606 sump will also work ('93-'95 E300 DIESEL)
Might be easyer to use the v8 swaybar or you may try installing spacers on your existing sway bar mounts.
Petar
03-05-2017, 07:45 AM #2

OM603 sump or w124 V8 swaybar either will fix the problem. As far as i remember you also need the om603 oil pump if you use the 603 sump. The W124 OM606 sump will also work ('93-'95 E300 DIESEL)
Might be easyer to use the v8 swaybar or you may try installing spacers on your existing sway bar mounts.

Reply
Reply
barrote
Find
Superturbo

1,627
03-05-2017, 10:15 AM #3
Reply
Reply
Or shim the sway bar holder .... 10 mm is more than enough Wink
FD,
Powered by tractor fuel
barrote
03-05-2017, 10:15 AM #3

Or shim the sway bar holder .... 10 mm is more than enough Wink

FD,
Powered by tractor fuel

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)